=====================  Product Identification  =====================

MSDS NAME:CAAPCOAT FP200 COLOR MATCHED POLYURITHANE RAIN EROSION COATI
NIIN:01-235-0828
Status Code:A
MSDS Number: CKNMR
=== Responsible Party ===
Company:CAAP CO INC
Address:152 PEPE'S FARM RD
City:MILFORD
State:CT
ZIP:06460
Country:US
Info Phone Num:203-877-0375
Emergency Phone Num:7035273887
Chemtrec Ind/Phone:(800)424-9300
CAGE:60922
=== Contractor Identification ===
Company:CAAP CO INC
Address:152 PEPE'S FARM RD
Box:City:MILFORD
State:CT
ZIP:06460
Country:US
Phone:203-877-0375
CAGE:60922

=============  Composition/Information on Ingredients  =============

Name:METHYL ISO-BUTYL KETONE MIBK
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 13%
Other REC Limits:75PPPM-STEL
OSHA PEL:50PPM TWA
ACGIH TLV:50PPM TWA
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:XYLENE
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 39%
Other REC Limits:150PPM-STEL
OSHA PEL:100PPM
ACGIH TLV:100PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:METHYLENEBIS(4-CYCLOHEXYL ISOCYANATE)
CAS:5124-30-1
RTECS #:HQ9250000
Fraction by Wt: <0.5%
Other REC Limits:NONE
OSHA PEL:0.01PPM CIELING
ACGIH TLV:0.005PPM TWA

Name:ISOCYANATE TERMINATED POLYESTER PREPOLYMER
CAS:54954-83-5
Fraction by Wt: 38.6%

Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 7%
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
Minumum % Wt:0.
Maxumum % Wt:2.
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

Name:CHROMIUM OXIDE GREEN
CAS:1308-38-9
RTECS #:GB6475000
Minumum % Wt:0.
Maxumum % Wt:.5
Other REC Limits:NONE
OSHA PEL:1.0MG/M3 TWA (AS CR)
ACGIH TLV:0.5MG/M3 TWA (CR III

Name:PYRROLOPYRROL RED 254
CAS:84632-65-5
Minumum % Wt:0.
Maxumum % Wt:.5

Name:COPPER PHTHALOCYANINE BLUE
CAS:147-14-8
RTECS #:GL8510000
Minumum % Wt:0.
Maxumum % Wt:.5
Other REC Limits:NONE
OSHA PEL:1.0 MG/M3 (AS CU MIS
ACGIH TLV:1.0MG/M3 (AS CU MIST

Name:ISOINDOLINE YELLOW 109
CAS:106276-79-3
Minumum % Wt:0.
Maxumum % Wt:.5

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT MAY DAMAGE EYES,
    IRRIATAE SKIN, AND CAUSE RESPIRATORY IRRITATION UPON INHALATION.
    CHRONIC: REPEATED OR PROLONGED EXPOSURE MAY CAUSE DEFATTING OF THE
    SKIN, DERMATITUS AND POSSIBLE SENSIT IZATION.  INHALATION OF VERY
    HIGH VAPOR CONCENTRATIONS OF PROLONGED EXPOSURE MAY CAUSE NEURAL
    DYSFUNCTION, KINNEY AND LIVER DAMAGE.
Effects of Overexposure:VAPOR EXPOSURE: BURINING EYES, HEADACHE,
    DIZZINESS, THROAT IRRITATION, LKOSS OF APPETITE, NAUSEA. CONTATT:
    MAY CAUSE IRRITATION OF SKIN, BURNING OF SKIN OR EYES.
Medical Cond Aggravated by Exposure:PREEXISTING ALLERGIES, EYE SKIN AND
    RESPIRATORY DISORDERS.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER GET IMMEDIATE MEDICAL ATTENTION. SKIN,
    REMOVE CONTAMINARED CLOTHING, WASH SKIN PROMPTLY WITH SOAP AND
    WATER, REAPEAT IF NEDEESSARY. IF SIGNS AND SYMPTOMES PRRSIST, GET
    IIMMEDIAT E MEDICAL ATTENTION. INHALATION; REMOVE TO FRESH AIR,
    GIVE ARTIVICIAL RESPIRATION IF NECCESSARY. GET IMMEDIATE MEDICAL
    ATTENTION. INGESTION: DO NOT INDUCE VOMITING, GIVE IMMEDTATE
    MEDICAL ATTENTION. I F VOMITING OCCURS SPONTANEOUSLY KEEP VICTM'S
    HEAD BELOW HIPS TO PREVENT BREATHING VOMITUS INTO LUNGS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:=20.C, 68.F
68F FOR MBK
Lower Limits:1.0
Upper Limits:8
Extinguishing Media:CO2 FOAM DRY CHEMICAL
Fire Fighting Procedures:USUAL METHODS FOR FLAMMABLE LIQUIDS. THE
    PRODUCT IS NOT MISCIBLE WITH WATER, ALTHOUG WATER MAY BE USED TO
    COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:NONE. PRODUCT IS A FLAMMABLE LIQUID.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF INGITION, AND DO NOT
    SMOKE IN THE AREA. WEAR ALL PROTECTIVE EQUIPMENT. WEAR PROTECTIVE
    EQUIPMENT.	CONTAIN THE SPILL WITH DIKES OF ABSORBANT MATERIAL, AND
    SOAK UP THE SPILL WITH  THE ABSORNANT MATERIAL. CELAN UP THE
    MATERIAL AND CONTAIN SECUREALY.  SWEEP AND WET MOP THE EFFETED AREA
    WITH SOAP AND WATER. VENTELATE THE AREA AS EELL AS POSSIBLE.

======================	Handling and Storage  ======================

Other Precautions:FOR MORE COMPLETE HEALTH AND SAFETY INFORMATION, ON
    THE USE OF COATINGS CONTAINING RESUDUAL ISOCYANATE, PLEASE CONSULT
    BAYER'S HEALTH AND SAFETY INFORMATION BROCHURE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF USE CONDITIONS GENERATE VAPORS OR MISTS, WEAR
    A NIOSH APPROVED RESPIRATOR APPROPRIATE FOR THOSE EMITION LEVELS AT
    POINT OFUSE. APPROPRIATE RESPIRATORS INCLUDE A FULL FACEPIECE OR A
    PURIFYING CERTRI GE REAPIRATOR EQUIPPED FOR ORGANIC VAPORS AND
    MISTS, A SCBA IN THE PRESSURE EEMAND MODE, OR A POSITIVE PRESSURE
    AIR-SUPPLIED RESPIRATOR.
Ventilation:A SPRQY BOOTH IS REQUIRED FOR SPRAY APPLICATIONS. ONLY
    PROPLRLYA
Protective Gloves:SOLVENT RESISTENT GLOVES
Eye Protection:SOLVENT RESISTENT GOGGLES
Other Protective Equipment:THE SER MUST BE FULY PRODECTED FROM EXPOSURE
    TO MATERIAL DURING SPRAY APPLICATION.  IF EXPOSURE MIGHT OCCUR, A
    FULL PERMIATION RESISTENT PROTECTIVE SUIT INCLUDING HEAD COVERING
    FACE SHIELD GLOVES AND *
Work Hygienic Practices:DO NOT WEAR CONTACT LENSES WHEN USING THIS
    PRODUCT. CONTACT LENSES CONTRUIBUTE TO THE SEVERITY OF AN EYE
    INJURY. WASH EELL WITH SOAP AND WATER AFTER HANDLING THE PRODUCT.
Supplemental Safety and Health
WEAR A SCBA IN THE PRESSURE DEMAND MODE OR A POSITIVE PRESSURE
    AI-SUPPLIED RESPIRATOR.

==================  Physical/Chemical Properties  ==================

Boiling Pt:>116.1C, 241.F
B.P. Text:241-281F **
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:8MMHG
Vapor Density:3.6AIR=1
Spec Gravity:1.007(COATING)H2O=1
VOC Pounds/Gallon:541
VOC Grams/Liter:4.5
Evaporation Rate & Reference:0.85 BUTYL ACETATE =1
Solubility in Water:INSOLLUABLE (COATING)
Appearance and Odor:LIGHT TO DARK GRAY OR GREEN LIQUID, AROMATIC
    SOLVENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
THE PRODUCT IS INCOMPATIVLE WITH STRON OXIDIZING AGENTS.
Stability Condition to Avoid:SHOULD BE KEPT AWAY FROM ALL IGNITION
    SOURCES, HOT SURFACES, AND TEMPERATURES ABOVE 100 DEG. F.
Hazardous Decomposition Products:CARBON MONOXIDE CARBON DIOXIDE OXIDES
    OF NITROGEN AS WELL AS  TRACES OF HCN MAY BE RELEASED DURING
    COMBUSTION.

===================  Toxicological Information	===================

Toxicological Information:* OVERSHOES IS REQUIRED. WEAR SOLVENT
    RESISTANT APRON AND BOOTS FOR SPILLS. AN EYE WASH AND SAFETY SHOWR
    SHOULD BE NEARBY AND READY FOR USE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCNRATION IN A PROPERLY DESGNED AND LICENCED
    INCNRATR IS PREFERRED; THIS IS RCRA HAZARDOUS IGNITABLE WASTE.
    REGULATIONS MAY VARY FROM STATE TO STATE; DISPOSE OF ACCOR. TO
    STATE AND FDERAL RGLATIONS.  WHEN THE FP-200, CURING AGENT AND
    ACCLEATR ARE MIXED AND THE SOLVENT IS ALLOWED TO EVAPORATE, THE SO
    LID END POODUCT IS A NON=HAZARDOUS LANDFILL ITEM.

===================  MSDS Transport Information  ===================

Transport Information:SHIPPING NAME PAINT RELATED MATERIAL. DOT
    CLASSIFICATION 3 (FLAMMABLE LIQUID)

=====================  Regulatory Information  =====================

SARA Title III Information:MIBK XYLENE CHROMIUM III OXIDE GREEN, COPPER
    PHTHALOCYANINE BLUE.
State Regulatory Information:THE FOLLOWING CHEMICALS ARE LISTED BY
    INDIVIDUAL STATES. FOR MORE COMPLETE INFORMATION, CONTACT THE
    APPROPRIATE AGENCY IN YOUR STATE. OTHER PRODUCT SPECIFIC HEALTH AND
    SAFETY DATA IN OTHER SECTIONS IN  THE MSDS MAY ALSO BE ALPPLICALLE
    FOR STATE REQUIREMENTS. FOR DETAILS ON YOUR REGULATORY
    REQUIREMENTS, YOU SHOULD CONTACT THE APPROPRIATE AGENCY IN YOUR
    STATE.  MIBK: =MA, PA RIGHT-TO-KNOW XYLENE=MA,  PA, RIGHT-TO-KNOW.
    METHALENE BIS(4CYCLOHEXYLISOCYANATE)=MA, NJ, PA, RIGHT-TO-KNOW.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***