===================== Product Identification =====================
MSDS NAME:AZ61A BARE WIRE MAGNESIUM ALLOY
Status Code:A
MSDS Number: CLQQH
=== Responsible Party ===
Company:NATIONAL WELDING ALLOYS INC
Address:1600 SOUTH CANAL STREET
City:PITTSBURGH
State:PA
ZIP:15215-2624
Country:US
Info Phone Num:412-781-4255
Emergency Phone Num:412-781-4255
CAGE:0ACE2
=== Contractor Identification ===
Company:NATIONAL WELDING ALLOYS INC
Address:1600 SOUTH CANAL STREET
Box:City:PITTSBURGH
State:PA
ZIP:15215-2624
Country:US
Phone:412-781-4255
CAGE:0ACE2
============= Composition/Information on Ingredients =============
Name:NICKEL
CAS:7440-02-0
RTECS #:QR5950000
= Wt:.05
OSHA PEL:0.10 MG/M3
ACGIH TLV:0.10 MG/M3
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:FLUORINE
CAS:7782-41-4
RTECS #:LM6475000
< Wt:.01
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:ALUMINIUM
CAS:7429-90-5
RTECS #:BD0330000
Minumum % Wt:5.8
Maxumum % Wt:7.2
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3
Name:BERYLLIUM
CAS:7440-41-7
RTECS #:DS1750000
< Wt:.01
Name:ZINC
CAS:1314-13-2
RTECS #:ZH4810000
Minumum % Wt:.4
Maxumum % Wt:1.5
OSHA PEL:5.00 MG/M3
ACGIH TLV:5.00 MG/M3
Name:MAGNESIUM
CAS:7439-95-4
RTECS #:OM2100000
= Wt:91.04
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
= Wt:.05
OSHA PEL:15 MG/M3
ACGIH TLV:10 MG/M3
Name:COPPER
CAS:7440-50-8
RTECS #:GL5325000
= Wt:.05
OSHA PEL:0.10 MG/M3
ACGIH TLV:0.20 MG/M3
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:MANGANESE
CAS:7439-96-5
RTECS #:OO9275000
= Wt:.15
OSHA PEL:1.0 MG/M3
ACGIH TLV:1.0 MG/M3
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:UNKNOWN IARC:UNKNOWN OSHA:YES
Health Hazards Acute and Chronic:WELDING GENERATES FUMES, GASES AND
ELECTROMAGNETIC RADIATION WITH KNOWN ADVERSE HEALTH EFFECTS. THE
COMPOSITION OF WELDING EMISSIONS VARIES SUBSTANTIALLY WITH THE
WELDING PROCESS.
Explanation of Carcinogenicity:NICKEL SHOULD BE CONSIDERED A POSSIBLE
CARCINOGEN PER OSHA 29CFR 1910.1200. CERTAIN NICKEL COMPOUNDS HAVE
BEEN IMPLICATED BASED ON EXPERIENCE IN SOME NICKEL REFINING
OPERATIONS. THE SPECIFIC COMPOUNDS , HOWEVER, HAVE NOT BEEN
DETERMINED & A DIRECT ASSOCIATION BETWEEN NICKEL WELDING FUME &
CANCER HAS NOT BEEN DEMONSTRATED.
Effects of Overexposure:SHORT TERM EXPOSURE TO WELDING FUME MAY RESULT
IN DISCOMFORT, DIZZINESS, NAUSEA AND DRYNESS OR IRRITATION OF THE
THROAT. LONG TERM EXPOSURE TO WELDING FUME, GASES OR DUST MAY
CONTRIBUTE TO PULMONARY IRRITATION OR PNEUMOCONIOSIS. LONG TERM
EXPOSURE TO IRON FUME MAY PRODUCE SIDEROSIS, WHICH IS GENERALLY
REGARDED AS BENIGN.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTION OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY IRRITANTS
CONTAINED IN WELDING FUMES.
======================= First Aid Measures =======================
First Aid:REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS STOPPED
PERFORM ARTIFICIAL RESPIRATION. SUMMON MEDICAL AID IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:THIS ALLOY IS NONCOMBUSTIBLE. USE EXTINGUISHING
MEDIA APPROPRIATE TO THE SURROUNDING FIRE.
Fire Fighting Procedures:IF THIS MATERIAL IS REDUCED TO POWDER FORM,
CAUTION MUST BE USED TO PREVENT FIRE OR EXPLOSION. TO EXTINGUISH A
METAL POWDER FIRE USE DRY SAND, DRY GRAPHITE OR OTHER CLASS D FIRE
EXTINGUISHING POWDER.
Unusual Fire/Explosion Hazard:NO UNUSUAL FIRE OR EXPLOSION HAZARDS ARE
ASSOCIATED WITH THIS MATERIAL.
====================== Handling and Storage ======================
Other Precautions:USE EXHAUST SYSTEM TO CLEAR WELDING FUMES. MAKE SURE
THAT INHALED AIR DOES NOT CONTAIN FUME CONSTITUENTS ABOVE
PERMISSABLE LEVELS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING, BRAZING OR SOLDERING IN CONFINED SPACE OR
WHERE LOCAL EXHAUST OR VENTILATION DOES NOT KEEP EXPOSURE BELOW
PEL, TLV, OR STEL.
Ventilation:USE ENOUGH VENTILATION, LOCAL EXHAUST AT THE ARC (OR
FLAME), OR BOTH, TO KEEP THE FUMES & GASES BELOW PEL'S, TLV'S OR
STEL'S IN THE BREATHING ZONE.
Protective Gloves:WELDER'S GLOVES, ARM PROTECTORS
Eye Protection:WEAR HELMET OR USE FACE SHIELD WITH FILTER LENS OF
APPROPRIATE SHADE NUMBER
Other Protective Equipment:WEAR HEAD & BODY PROTECTION WHICH HELP TO
PREVENT INJURY FROM RADIATION, SPARKS, FLAME AND ELECTRICAL SHOCK.
APRONS, HATS, SHOULDER PROTECTION, DARK CLOTHING. WELDERS SHOULD
NOT WEAR SHORT SLEEVE SHIRTS
Supplemental Safety and Health
WELDING FUMES & GASES CANNOT BE CLASSIFIED SIMPLY. THE COMPOSITION &
QUANTITY OF BOTH ARE DEPENDENT UPON THE METAL BEING WELDED, THE
PROCESS, PROCEDURES AND ELECTRODES USED.
================= Stability and Reactivity Data =================
AVOID CONTACT WITH MINERAL ACIDS AND OXIDIZING AGENTS WHICH MAY
GENERATE HYDROGEN GAS: THE EVOLUTION OF HYDROGEN MAY BE AN
EXPLOSION HAZARD.
Hazardous Decomposition Products:VARIOUS ELEMENTAL METALS AND METAL
OXIDES MAY BE GENERATED FROM MELTING OR CROSS HANDLING OPERATIONS.
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE A ND LOCAL REGULATIONS.
======================= Other Information =======================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|