===================== Product Identification =====================
MSDS NAME:VISCONORUST 1602
Status Code:A
MSDS Number: CLQRC
=== Responsible Party ===
Company:VISCOSITY OIL CO
Address:3200 S WESTERN AVE
City:CHICAGO
State:IL
ZIP:60608-6003
Country:US
Info Phone Num:312-847-0224
Emergency Phone Num:(800)424-9300
Resp. Party Other MSDS Num.:068140-5A2
Chemtrec Ind/Phone:(800)424-9300
CAGE:7P852
=== Contractor Identification ===
Company:VISCOSITY OIL CO
Address:3200 S WESTERN AVE
Box:City:CHICAGO
State:IL
ZIP:60608-6003
Country:US
Phone:312-847-0224
CAGE:7P852
============= Composition/Information on Ingredients =============
Name:PROPRIETARY ADDITIVE MIXTURE
= Wt:100.
===================== Hazards Identification =====================
Health Hazards Acute and Chronic:INHALATION:VAPORS CAN IRRITATE THE
MUCOUS MEMBRANES& CAUSE PULMONARY IRRITATION, DIZZINESS &NAUSEA.
EYE: CONTACT CAN CAUSE IRRITATION. SKIN: PROLONGED OR REPEATED SKIN
CONTACT WITH THIS PRODUCT TENDS TO REMOVE SKIN OILS POSSIBLY
LEADING TO IRRITATION AND DERMATITIS; HOWEVER, BASED ON HUMAN
EXPERIENCE AND AVAILABLE TOXIOLOGICAL DATA, THIS PRODUCT IS JUDGED
TO BE NIETHER A CORROSIVE NOR AN IRRITANT BY OSHA CRITERIA.
INGESTION: THIS PRODUCT IS JUDGED TO HAVE AN ACUTE ORAL LD50
(RAT):>5 OF BODY WEIGHT AND LD50(RABBIT):>3.16 G/KO OF BODY
WEIGHT." SEE SUPPLEMANTAL DATA"
Effects of Overexposure:POSSIBLE APPIRATION HAZARD EXISTS WITH LOW
VISCOSITY PRODUCTS DURING VOMITNG WHICH COULD CAUSE PULMONARY EDEMA
WHICH CAN BE FATAL. HIGH VAPOR CONCENTRATIONS (GREATER THAN
APPROXIMATELY 1000 PPM) ARE I RRITATING TO THE EYES AND THE
RESPIRATORY TRACT, MAY CAUSE HEADACHES AND DIZZINESS, ARE
ANESTHETIC, AND MAY HAVE OTHER CENTRAL NERVOUS SYTEM EFFECTS.
======================= First Aid Measures =======================
First Aid:SKIN: WASH WITH SOAP AND WATER, OR USE WATERLESS HAND CLEANER
AFTER SKIN CONTACT. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
EYE: FLUSH WITH WATER FOR AT LEST 15 MINUTES, GETTING UNDER
EYELIDS. CONTA CT PHYSICIAN IF IRRITATION PERSISTS. INHALATION:
MISTS OR VAPOR) REMOVE VICTIM FROM AREA OF EXPOSURE TO FRESH AIR.
INGESTION: DO NOT INDUCE VOMITING. CONTACT PHYSICIAN FOR ADVICE.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:=37.8C, 100.F
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:1
Upper Limits:6
Extinguishing Media:WATER SPRAY (FOG), DRY CHEMICAL, FOAM, HALON,
CARBON DIOXIDE. WATER STREAM MAY SPLASH BURNING LIQUID, SPREADING
THE FIRE.
Fire Fighting Procedures:CLASS III B COMBUSTIBLE LIQUID, USE AIR
SUPPLEID BREATHING EQUIPMENT FOR FIGHTING INTERIOR FIRES. COOL FIRE
EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:A VAOR ACCUMULATION WOULD FLASH AND/OR
EXPLODE IF IGNITED. NEVER USE A WELDING TORCH ON OR NEAR DRUM, EVEN
IF EMPTY.
================== Accidental Release Measures ==================
Spill Release Procedures:SHUT OFF AND ELIMINATE ALL IGNITION SOURCES.
KEEP PEOPLE AWAY. RECOVER FROM PRODUCT. ADD SAND, EARTH OR OTHER
SUITABLE ABSORBENT TO SPILL AREA. MINIMIZE BREATHTING VAPORS.
MINIMIZE SKIN CONTACT. VENTI LATE CONFINED SPACES. OPEN ALL WINDOW
AND DOORS. KEEP PRODUCT OUT OF SEWERS AND WATER COURSES BY DIKING
OR IMPOUNDING.ADVICE AUTHORITIES IF PRODUCT HAS ENTERED OR MAY
ENTER SEWERS,WATER SOURSES.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP PRODUCT AWAY FROM HEAT, SPARKS,
PILOT LIGHTS, STATIC ELECTRICITY, AND OPEN FLAME. EMPTY CONTAINERS
RETAIN RESIDUE (LIQUID AND/OR VAPOR) AND CAN BE DANGEROUS. DO NOT
PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH
CONTAINERS TO HEAT, FLAME, SPARKS OR OTHER SOURCES OF IGNITION.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE (LIQUID AND/OR VAPOR)
AND CAN BE DANGEROUS. DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER,
DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS OR
OTHER SOURCES OF IGNITION.THEY MAY EXPLODE AND CAUSE INJURY OR
DEATH.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:RESPIRATORS ACCEPTABLE FOR MISTS OR PARTICULATES
RECOMMENDED FOR FPROTECTION FROM OIL VAPORS OR MISTS IN EXCESS OF
THE TLV. AIR SUPPLIED OR SELF CONTAINED BREATHING EQUIPMENT
RECOMMENDED FOR CONCENTRA TIONS ABOVE 750 MG/M3.
Ventilation:USE ONLY WITH VENTILATION SUFFICIENT TO PREVENT
EXCEEDINGING RECOMMENDED EXPOSURE LIMIT OR BUILD UP OF EXPLOSIVE
CONCENTRATIONS OF VAPOR IN AIR.
Protective Gloves:NEOPRENE OR NITRILE.
Eye Protection:SAFETY GLASSES, GOGGLES OR FACE SHIELD.
Work Hygienic Practices:EMPLOYEES MUST PRACTICE GOOD PERSONAL HYGINE.
WASHING HANDS AFTER USE AND LAUNDERING CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
POSSIBLE ASPIRATION HAZARD EXISTS WITH LOW VISCOSITY PRODUCTS DURING
VOMITING WHICH COULD CAUSE PULMONARY EDEMA WHICH CAN BE FATAL.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:=310.C, 590.F
Vapor Pres:141
Vapor Density:14.3
Evaporation Rate & Reference:1 (ETHYL ETHER=1)
Appearance and Odor:VISCOUS, BROWN FLUID, PETROLEUM ODOR.
Percent Volatiles by Volume:36
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID STRON OXIDIZERS SUCH AS CHLORINE AND OXYGEN, HEAT AND SOURCES OF
IGNITION.
Stability Condition to Avoid:COMBUSTIBLE;FLASH 100F;AVOID STRONG
OXIDIZERD,HEAT SOURVES OF IGNITION
Hazardous Decomposition Products:COMBUSTION PRODUCES CARBON MONOXIDE
AND CARBON DIOXIDE ALONG WITH SMOKE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
===================== Ecological Information =====================
Ecological:CLASSIFIED AS AN "OIL" UNDER COAST GUARD REGULATIONS AND THE
CLEAN WATER ACT. SPILLS ENTERING A WATERWAY THAT CAUSE SHEEN ON THE
WATER SURFACE MUST BE REPORTED TO THE U.S. COAST GUARD.
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE MAY BE DISPOSED OF BY A LICENSED WASTE
DISPOSAL COMPANY. CONTAMINATED ABSORBENT MATERIALS MAY BE DISPOSED
OF IN AN APPROVED LANDFILL. FEDERAL, STATE, AND LOCAL DISPOSAL
REGULATIONS MUST BE FOLLO WED.
=================== MSDS Transport Information ===================
Transport Information:MANUFACTURER STATES: DOT PROPER SHIPPING NAME:
PETROLEUM NAPTHA OR PETROLEUM NAPTHA MIXTURE, NA 1255. DOT
CLASSIFICATION: COMBUSTIBLE MIXTURE. UN 1255
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|