MSDS CEA EIA Rev 0 / 2007-01-15 1/3
MATERIAL SAFETY DATA SHEET
1. Product and company identification
CanAg CEA EIA
Product:
401-85
Product No:
Manufacturer: Fujirebio Diagnostics AB
Majnabbeterminalen
SE-414 55 G枚teborg, Sweden
www.fdab.com, info@fdab.com
For information call: +46 31 85 70 30 or Fax: +46 31 85 70 40
In case of emergency, please contact Fujirebio Diagnostics AB at tel: +46 31 85 70 30
2. Hazardous ingredients
Kit component Hazardous ingredient Concentration CAS No R phrases
Stop Solution Hydrogen chloride (HCl) 0.12 M 7647-01-0 C; R34-37
3. Hazards identification
None of the kit components of the CanAg CEA EIA kit may be classified as hazardous due to the low
concentration of hazardous ingredients.
4. First aid measures
Inhalation: Remove victim from source of exposure. If breathing is difficult, administer oxygen.
Skin exposure: In case of contact, wash with plenty of soap and water. Seek medical attention if irritation
develops.
Eyes: Hold eyelids open and flush with a steady, gentle stream of water for at least 15 minutes. Seek
immediate medical attention.
Ingestion: Give 2-3 glasses of water to drink and do not induce vomiting. Seek immediate medical attention.
5. Fire fighting measures
Use extinguishing media appropriate to surrounding materials. No special equipment or procedures are
required.
6. Accidental release measures
Absorb spills of reagents and patient samples with absorbent paper, taking care not to spread the material.
Clean spill area with a freshly made 0.5 % sodium hypochlorite (bleach) solution. Discard all materials used to
absorb spill and disinfect area into biohazard waste collection for proper disposal. Avoid contact with eyes and
skin.
MSDS CEA EIA Rev 0 / 2007-01-15 2/3
7. Handling and storage
Handling: Do not eat, drink, smoke or apply cosmetics in laboratory areas. Do not pipette patient samples or
reagents by mouth. Avoid splashing or aerosol formation. Use all reagents in accordance with the relevant
package insert. Avoid high temperatures and keep from freezing during transport.
Storage: Store all reagents as directed in the relevant package insert.
8. Exposure controls and personal protection
Engineering controls: None required
Wear appropriate personal protective equipment when working with reagents or patient specimens, including
lab coats, disposable gloves and eye protection. Avoid hand/mouth contact. Wash hands as soon as possible
after handling reagents or patient specimens.
9. Physical and chemical properties
Physical state: Liquid Color: Clear Odor: None
Basic physical properties: As water
10. Stability and reactivity
The reagents in the kit are stable under the storage conditions described in the package insert. Hazardous
decomposition will not occur. There are no known strong incompatibilities.
11. Toxicological information
Due to low concentrations of toxic ingredient used the product is not toxic.
12. Ecological information
The product does not effect the environment.
13. Disposal considerations
Dispose in accordance with applicable laws.
14. Transport information
No limitations apply
15. Regulatory information
This product is classified and labelled in accordance with EEC directives 99/45/EC and 91/155/EEC as
modified in 2001/58/EC.
The information in this document is believed to be accurate and represents the best information currently
available to us. However, we make no warranty of merchantability or any other warranty, express or implied,
with respect to such information, and we assume no liability resulting from its use. Users should make their
own investigations to determine the suitability of the information for their particular purposes.
MSDS CEA EIA Rev 0 / 2007-01-15 3/3
16. Other information
C: Corrosive
R34: Causes burns.
R37: Irritating to respiratory system.
First issue date: 2007-01-15
|