MSDS No. E-0011-B (E) 1/3
Fit-Checker - Base
MATERIAL SAFETY DATA SHEET
Number: MSDS No. E-0011-B(E)
Date prepared: August 23, 2004
Date revised: June 2, 2006
1. Chemical Product and Company Identification
Product code: -
Product name: Fit-Checker 鈥? Base
Manufacturer / Supplier:
GC Corporation, 76-1 Hasunuma-Cho, Itabashi-Ku, Tokyo, Japan
Postal code 174-8585, Phone 81-3-3965-1388
Australian supplier:
Henry Shein Halas Dental Co., Ltd.,
Sydney 鈥? Head Office
44 O'Dea Ave, Waterloo, NSW 2017
Emergency Phone (02) 9697-6288
Fax (02) 9697 6250
2. Composition / Information on Ingredients
(% chemical components by WT)
Dimethyl methylhydrogenpolysiloxane (CAS# 68037-59-2) 65%
Calcium carbonate (CAS# 471-34-1) 35
3. Hazards Identification
Emergency Overview:
None hazardous identification.
Potential Health Effects
Eye: May cause slight irritation.
Skin: No special hazard known.
Ingestion: No special hazard known.
Inhalation: No special hazard in normal use.
4. First Aid Measures
Eyes: Flush eyes with plenty of water for at least 15 minutes.
Skin: Generally the product does not irritate skin.
Ingestion: If symptoms persist consult doctor.
Inhalation: Supply fresh air. Consult doctor in case of complaints.
5. Fire Fighting Measures
Flammable Properties: Not flammable.
Flash Point: Not applicable.
Flammable Limits: Not applicable
Auto Ignition Temperature: Product is not auto igniting.
Hazardous Combustion Products: Not known
Extinguishing Media: Chemical foam, carbon dioxide, and dry chemical
Fire Fighting Instructions: No special measures required.
MSDS No. E-0011-B (E) 2/3
Fit-Checker - Base
6. Accidental Release Measures
Person-related safety precautions: Not required.
Measures for environmental protection: No special measures required.
Measures for cleaning/collecting: Pick up mechanically.
Additional information: No dangerous substances are released.
7. Handling and Storage
Handling: No special measures required.
Storage: Store in room temperature. Keep away from heat and high humidity.
8. Exposure Controls, Personal Protection
Respiratory Protection: Not required
Skin Protection: Not required.
Eye Protection: Not specially required.
Exposure Guideline(s):
Exposure limit:
Calcium carbonate (CAS# 471-34-1)
OSHA PEL: none listed.
ACGIH: 10mg/M3 TWA
Engineering Controls: No special controls are need.
9. Physical and Chemical Properties
Appearance: Semi-transparent past
Odor: Odorless
Boiling Point: Undermined
Vapor Pressure: No data
Vapor Density: No data
Solubility in Water: Insoluble
Specific Gravity: Undermined
Freezing Point: Undermined
pH: Undermined
Volatile: Undermined
10. Stability and Reactivity
Stability: Stable
Incompatibility: Non
Hazardous Decomposition Products: No decomposition products known.
Hazardous Polymerization: No hazardous polymerization known.
11. Toxicological Information
Calcium carbonate (CAS# 471-34-1)
Draize test, rabbit, eye: 750ug/24H Severe
Draize test, rabbit, skin: 500mg/24H Moderate
Oral, rat: LD50: 6450 mg/kg
Carcinogenicity: CAS 471-34-1: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA
Acute Toxicity:
Primary irritant effect:
On the skin: No irritant effect.
On the eyes: No irritant effect.
Additional toxicological information:
When used and handled according to specifications, the product does not have any harmful
effects to our experience and the information provided to us.
12. Ecological Information
No data are available on the adverse effects of this material on the environment.
MSDS No. E-0011-B (E) 3/3
Fit-Checker - Base
13. Disposal Considerations
Disposal must be made according to state and/or official regulations.
14. Transport Information
IMO Regulations: Not IMO hazardous material
ICAO and IATA Regulations: Not ICAO/IATA hazardous material
15. Regulatory Information
Japan: not regulated as hazardous material.
It is recommended however to consult regulations of state/region to determine its identification.
16. Other Information
No information available.
The information herein is given in good faith, but no warranty expressed or implied, is made.
|