MATERIAL SAFETY DATA SHEET
TAM Ceramics, LLC (#220821) For Chemical Emergency
4511 Hyde Park Blvd. Spill, Leak, Fire, Exposure or Accident
P.O. Box 67 Call CHEMTREC Day or Night
Niagara Falls, NY 14305 DOMESTIC NORTH AMERICA 800-424-9300
Phone Number; 716-278-9400 INTERNATIONAL CALL: 703-527-3887 (collect calls accepted)
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
Product Name: Ceramic Rutile 50 Lb Bag Date of Preparation: 01/01/2008
Chemical Name: Rutile
CAS-No.: 1317-80-2
Product code: 1014084
2. COMPOSITION/INFORMATION ON INGREDIENTS
Exposure limits
Components Weight %
CAS-No OSHA ACGIH
Rutile 1317-80-2 100% Not established Not established
3 3
OSHA particulate (not otherwise regulated) limit: 5 mg/m (respirable); 15 mg/m (total).
3. HAZARDS IDENTIFICATION
Emergency Overview
Caution
NFPA 704
Color: White Health: 1
Physical state: Powder Fire: 0
Odor: Odorless Instability: 0
Avoid dust formation. May cause physical irritation.
Potential Health Effects
Principle routes of exposure: Inhalation, ingestion, skin and eye contact.
Eye contact: May cause slight irritation. Resin particles, like other inert materials, are mechanically irritating to eyes.
Skin contact: Prolonged skin contact may cause skin irritation and/or dermatitis.
Inhalation: Product dust may be irritating to eyes, skin and respiratory system. Over-exposure by inhalation may cause respiratory
irritation.
Ingestion: May irritate digestive tract.
Chronic toxicity: Excessive inhalation of dust may cause chemical pneumonitis, cyanosis, and pulmonary edema.
HMIS
Health: 1
Fire: 0
Physical hazard: 0
PPE: E
4. FIRST AID MEASURES
Eye contact: Rinse immediately with plenty of water, also under the eyelids. Get medical attention if irritation developes.
Skin contact: Wash off immediately with soap and plenty of water. Remove and wash contaminated clothing before re-use. If
symptoms persist, call a physician.
Prod uct name: Cerami c R uti le 5 0 Lb B ag Page 1 of 4
Inhalation: Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms persist, call a
physician.
Ingestion: Drink plenty of water. Consult a physician if necessary. Do not induce vomiting without medical advice.
Notes to physician: Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Flash point: No data available
Suitable extinguishing media: Use extinguishing measures that are appropriate to local circumstances and the surrounding
environment.
Hazardous decomposition products: Thermal decomposition can lead to release of irritating gases and vapors.
Special protective equipment for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, NIOSH
(approved or equivalent) and full protective gear.
Unusual hazards: Dust may form explosive mixture in air.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Avoid dust formation. Evacuate area of all unnecessary personnel. Avoid contact with skin, eyes and clothing.
Use personal protective equipment. Fine dust dispersed in air may ignite.
Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Do not flush into
surface water or sanitary sewer system.
Methods for cleaning up: Use approved industrial vacuum cleaner for removal. Wear personal protective equipment. Dispose of
promptly.
7. HANDLING AND STORAGE
Handling: Handle in accordance with good industrial hygiene and safety practice. Avoid dust formation. Avoid contact with skin, eyes
and clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Provide appropriate exhaust ventilation at places
where dust is formed. Remove all sources of ignition. Wash hands thoroughly before eating, drinking or smoking.
Storage: Keep container tightly closed in a dry and well-ventilated place.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures: Ensure adequate ventilation, especially in confined areas.
Respiratory protection: Use NIOSH approved respirator when ventilation is inadequate.
Hand protection: Impervious gloves.
Skin and body protection: Lightweight protective clothing.
Eye protection: Safety glasses with side-shields.
Exposure limits: See Section 2.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: Physical state:
White Powder
Odor: Molecular weight:
Odorless No data available
Boiling point/range (掳C): pH:
No data available No data available
Melting point/range (掳C): Specific gravity (Water =1):
1840 3.800 - 4.300
Vapor pressure (mmHg): Evaporation rate (Water =1):
No data available No data available
Water solubility (mg/l): VOC content (%)
Insoluble No data available
Prod uct name: Cerami c R uti le 5 0 Lb B ag Page 2 of 4
10. STABILITY AND REACTIVITY
Stability: Stable at normal conditions.
Polymerization: Will not occur.
Hazardous decomposition products: None under normal use.
Materials to avoid: None known.
Conditions to avoid: Avoid dust formation.
11. TOXICOLOGICAL INFORMATION
Acute toxicity
12. ECOLOGICAL INFORMATION
Aquatic toxicity: No information available
Persistence and degradability: No information available
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused products: Waste must be disposed of in accordance with federal, state and local environmental
control regulations. Where possible recycling is preferred to disposal or incineration.
14. TRANSPORT INFORMATION
DOT:
Proper shipping name: Not regulated.
TDG (Canada):
Proper shipping name: Not regulated.
15. REGULATORY INFORMATION
U.S. Regulations:
Not subject to the provisions of SARA 313 Title III
Not subject to TSCA 12(b) Export Notification
State Regulations
This product or its ingredients have been evaluated for New Jersey, Pennsylvania, and California Prop 65 supplier notification
requirements. Substances that are subject to notification requirements, if any, are listed below.
Rutile (100%)
PARTK: Listed
Canadian WHMIS
WHMIS hazard class: D2B Toxic materials.
International Inventories
TSCA 8(b): All the ingredients are on the TSCA list.
Canadian DSL: All the ingredients are on the DSL.
EINECS: All the ingredients are on the EINECS list.
Phillipines (PICCS): Listed.
Japan (ENCS): Listed.
Korea (KECL): Listed.
China (IECS): Listed.
Australia (AICS): Listed.
Prod uct name: Cerami c R uti le 5 0 Lb B ag Page 3 of 4
16. OTHER INFORMATION
For Industrial Use Only
Prepared by: Product Manufacturer, TAM Ceramics, LLC
The information and recommendations contained in this Material Safety Data Sheet have been compiled from sources believed to be
reliable and to represent the most reasonable current opinion on the subject when the MSDS was prepared. No warranty, guaranty or
representation is made as to the correctness or sufficiency of the information. The user of this product must decide what safety
measures are necessary to safely use this product, either alone or in combination with other products, and determine its environmental
regulatory compliance obligations under any applicable federal or state laws.
End of Safety Data Sheet
Prod uct name: Cerami c R uti le 5 0 Lb B ag Page 4 of 4
|