MATERIAL SAFETY DATA SHEET Page 1 of 4
HMIS RATINGS:
Health :2
Flammability :2
Reactivity :0
Personal Protection: B
__________________________________________________________________________________________________
Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Trade Name: TEK-PHENE Emergency Telephone Number: (800)535-5053
Chemical Family : Disinfectant / Cleaner Date Prepared FEB 14, 2005
Company Identification: ABC COMPOUNDING CO., INC. MSDS Number : LA-701
P.O. BOX 16247 MFGD. BY: ABC Compounding Co., Inc.
6970 Jonesboro Rd.
ATLANTA, GA Morrow, Ga. 30260
__________________________________________________________________________________________________
Section 2: COMPOSITION, INFORMATION ON INGREDIENTS
SARA SARA
CAS CHEMICAL % BY OSHA PEL/ 302/ 313 STATE CERCLA
NUMBER NAME WGHT. ACGIH TLV 304(1)* (2)* INFO(3) (4) RQ
120-32-1 Ortho-benzyl-para- 6.5 n/e NO NO NO None
Chlorophenol
90-43-7 Ortho phenylphenol 6.0 n/e NO YES 3,4 None
80-46-6 Para-tertiary Amyl 10.0 n/e NO NO NO None
Phenol
67-63-0 Isopropanol < 5.0 400 ppm NO NO NO None
400 ppm
1310-73-2 Sodium Hydroxide < 5.0 2 mg/m3 NO NO NO 1000 lbs
2 mg/m3
107-21-1 Ethylene Glycol < 5.0 50 ppm NO YES NO 5000 lbs
* See Section 15 for more information n/e = none established - n/a = not applicable
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION
__________________________________________________________________________________________________
EMERGENCY OVERVIEW
DANGER. Corrosive. Combustible. Causes eye and skin damage or irritation.
Harmful or fatal if swallowed. Do not use or store near heat or open
Flames. Clear, amber liquid with alcohol odor.
__________________________________________________________________________________________________
Primary Route of Entry:Eye contact, skin contact
Acute/Potential Health Effects
EYES: May cause eye damage. Symptoms may include stinging, tearing, pain, and redness
and swelling of the conjunctiva.
SKIN: Brief contact may cause slight irritation. Prolonged contact may cause more severe
irritation with pain, local redness and swelling and possible tissue destruction.
INHALATION: High concentrations of mist may cause irritation of the respiratory tract.
INGESTION: Harmful or fatal if swallowed. Symptoms may include nausea, vomiting and
diarrhea.
MATERIAL SAFETY DATA SHEET Trade Name : TEK-PHENE
Page 2 of 4
MSDS Number : LA-701
__________________________________________________________________________________________________
Section 3: HAZARDS IDENTIFICATION - continued:
Chronic / Long Term Effects: None known.
Signs and Symptoms of Overexposure:
Dermal exposure may cause local redness and swelling, pain and discomfort.
Target Organ Effects:
No data.
Reproductive/Developmental Information:
No data.
Carcinogenic Information:
This material is not listed as a carcinogen by IARC, NTP or OSHA.
WARNING: This product contains a chemical known to the state of California
to cause cancer.
__________________________________________________________________________________________________
Section 4: FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Get medical
attention immediately.
SKIN: Immediately flush skin with plenty of water for at least 15 minutes while removing
contaminated clothing and shoes. Wash clothing before reuse. Get medical attention
immediately.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
INGESTION: Seek medical attention immediately. Call a poison control center or doctor
for treatment advice. Have person drink large quantities of water. Avoid alcohol.
NOTE TO PHYSICIAN: Probable mucosal damage may contraindicate the use of gastric lavage.
__________________________________________________________________________________________________
Section 5: FIRE FIGHTING MEASURES
Flash Point: 118 degrees F (TCC method)
Extinguishing Media: Use appropriate methods for combatting surrounding fire.
Special Fire Fighting Instructions: Wear a self contained breathing apparatus with a full
face piece operated in the positive pressure demand mode. Chemical resistant PPE is
recommended.
__________________________________________________________________________________________________
Section 6: ACCIDENTAL RELEASE MEASURES
Stop all leaks. Isolate hazard area. Keep unnecessary and unprotected personnel from
entering. Absorb spill with inert material (e.g. dry sand, earth). Eliminate all igni-
tion sources. Prevent runoff from entering drain, sewers, streams or other bodies of
water. Absorb unrecoverable product. Transfer contaminated absorbent, soil and
other materials to containers for disposal.
__________________________________________________________________________________________________
Section 7: HANDLING AND STORAGE
Follow all MSDS/label precautions even after container is emptied because they may contain
product residues. Use with adequate ventilation. Do not get in eyes, on skin or
clothing. Store in a cool, dry place. Keep container closed when not in use. Keep
out of reach of children. See label for further instructions.
__________________________________________________________________________________________________
Section 8: EXPOSURE CONTROLS and PERSONAL PROTECTION
Eye Protection: Wear safety glasses or goggles.
MATERIAL SAFETY DATA SHEET Trade Name : TEK-PHENE
Page 3 of 4
MSDS Number : LA-701
Skin Protection: Wear impervious gloves (made from rubber, nitrile or neoprene), clothing and
boots.
Respiratory Protection: When respiratory protection is required, use an organic vapor cart-
ridge. A respiratory program that meets OSHA's 29 CFR 1910.34 & ANSI Z88.2 requirements
must be adhered.
Engineering Controls: Good general ventilation required.
__________________________________________________________________________________________________
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance and Odor :Clear, amber liquid with alcohol odor
pH Concentrate :11.8
Solubility in Water : Complete
Vapor Pressure [mmHg] :n/e
Evaporation Rate (Butyl Acetate=1) :n/e
Vapor Density [Air=1] :n/e
Specific Gravity [H20=1] :1.07
Boiling Point :> 212 F
__________________________________________________________________________________________________
Section 10: REACTIVITY
Stability Stable
Hazardous Polymerization :Will not occur
Conditions to avoid :High temperature
Hazardous Decomposition Products: None
Incompatibility :Strong acids, alkalies, oxidizing agents
__________________________________________________________________________________________________
Section 11: TOXICOLOGICAL INFORMATION
No data.
__________________________________________________________________________________________________
Section 12: ECOLOGICAL INFORMATION
No data.
__________________________________________________________________________________________________
Section 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Wastes must be disposed of in accordance with federal, state and local environmental
control regulations. See label for further instructions.
__________________________________________________________________________________________________
Section 14: TRANSPORTATION INFORMATION
D.O.T. Shipping Name / Class:
Flammable liquid, Corrosive, n.o.s., 3 (8), UN2924 (contains
isopropanol and sodium hydroxide), PGIII
__________________________________________________________________________________________________
Section 15: REGULATORY INFORMATION
U.S. Federal Regulations:
TSCA (Toxic Substances Control Act):The intentional ingredients of product are listed.
Title III Section 311/312 Hazardous Categories - 40 CFR 370.2:
MATERIAL SAFETY DATA SHEET Trade Name : TEK-PHENE
Page 4 of 4
MSDS Number : LA-701
ACUTE (X) Chronic (X) Fire (X) Pressure ( ) Reactive ( ) Not Applicable ( )
(1) Title III Section 302/304 Extremely Hazardous Substances - 40 CFR 355 Appendix A
(2) Title III Section 313 Toxic Chemicals - 40 CFR 372.65
If indicated under Section 2 of this MSDS, this product contains toxic chemicals
subject to the reporting requirements of Section 313 of the Emergency Planning &
Community Right to Know Act of 1986. This information must be included in all
MSDS that are copied and distributed for this material.
RCRA Status: Under RCRA, it is the responsibility of the product user to determine
at the time of disposal, whether a material containing the product or derived from
the product should be classified as a hazardous waste. If this product becomes a
hazardous waste it would be assigned RCRA Code(s)
D001
State and Local Regulations: Certain states maintain their own ingredient lists which differ
slightly from the Federal standards. If indicated under Section 2 of this MSDS,
states listed below may have regulations on ingredients contained in this product
Check with your state for any additional regulations.
(3) California proposition 65 (Safe Drinking Water & Toxic Enforcement Act of 1986)
(4) Massachusetts (Hazardous Substance Disclosure by Employers)
__________________________________________________________________________________________________
Section 16: OTHER INFORMATION
This information was compiled from current manufacturer's MSDS's of the component
parts of the product.
Disclaimer: The Manufacturer believes that the information contained in the Material
Safety Data Sheet is accurate. The suggested procedures are based on experience as
of the date of publication. They are not necessarily all inclusive nor fully adequate
in every circumstance. Also, the suggestions should not be confused with, nor followed
in violation of applicable laws, regulations, rules or insurance requirements.
__
|