Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

7732-18-5
9010-98-4
65997-13-9
68083-03-4
8050-09-7
108-88-3
67-56-1
1314-13-2

File Name: accessories_wintersteigerusa_com---Safety_Data_Sheet_A30.asp
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral                    11/18/2003




Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.




SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes

ADDRESS: 3M Center
St. Paul, MN 55144-1000

EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)

Issue Date: 11/18/2003
Supercedes Date: 11/28/2001

Document Group: 10-2980-0

Product Use:
Intended Use: waterbased contact adhesive
Specific Use: water based contact adhesive


SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
WATER 7732-18-5 40 - 50
POLYCHLOROPRENE 9010-98-4 30 - 40
GLYCEROL ESTER OF HYDROGENATED ROSIN 65997-13-9 5 - 10
Rosin, polymer with phenol 68083-03-4 3- 7
ROSIN 8050-09-7 < 0.75
TOLUENE 108-88-3 1- 3
METHYL ALCOHOL 67-56-1 1 - 2.5
ZINC OXIDE 1314-13-2 1- 2




SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW


Odor, Color, Grade: neutral, slight odor of ammonia

Page 1 of 9
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral 11/18/2003


General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause allergic skin reaction. May cause target organ
effects. Contains a chemical or chemicals which can cause birth defects or other reproductive harm.


3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.




Skin Contact:
Prolonged or repeated exposure may cause:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.

Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.


May be absorbed through skin and cause target organ effects.




Inhalation:
Prolonged or repeated exposure may cause:
Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness,
and nose and throat pain.


May be absorbed following inhalation and cause target organ effects.




Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.

May be absorbed following ingestion and cause target organ effects.




Target Organ Effects:
May cause blindness.


Prolonged or repeated exposure may cause:
Central Nervous System (CNS) Depression: Signs/symptoms may include headache, dizziness, drowsiness, incoordination,
nausea, slowed reaction time, slurred speech, giddiness, and unconsciousness.

Central Neuropathy: Signs/symptoms may include irritability, memory impairment, personality changes, sleep disorders, and
decreased ability to concentrate.

Liver Effects: Signs/symptoms may include loss of appetite, weight loss, fatigue, weakness, abdominal tenderness and
jaundice.


Page 2 of 9
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral 11/18/2003




Contains a chemical or chemicals which can cause birth defects or other reproductive harm.




SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES

The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.

Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.

Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.

Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.

If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person.
Get immediate medical attention.


SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
No Data Available
Autoignition temperature

Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL



5.2 EXTINGUISHING MEDIA
Material will not burn.


5.3 PROTECTION OF FIRE FIGHTERS

Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA).

Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated.

Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.




Page 3 of 9
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral 11/18/2003


SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be
cleaned up by qualified personnel. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical
ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice. Warning! A motor could be an ignition
source and could cause flammable gases or vapors in the spill area to burn or explode. Contain spill. For larger spills, cover drains
and build dikes to prevent entry into sewer systems or bodies of water. For large spills, if necessary, get assistance from professional
spill clean up team. For small spills, carefully neutralize spill by adding appropriate dilute acid such as vinegar. Work slowly to avoid
boiling or spattering. Continue to add neutralizing agent until reaction stops. Let cool before collecting. Or use a commercially
available caustic (alkaline or basic) spill clean-up kit. Follow kit directions exactly. Working from around the edges of the spill
inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it
appears dry. Collect as much of the spilled material as possible. Clean up residue with detergent and water. Place in a closed
container approved for transportation by appropriate authorities. Cover, but do not seal for 48 hours. Dispose of collected material as
soon as possible.

In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.


SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water. Contents may be under
pressure, open carefully. Keep out of the reach of children. Avoid eye contact with vapors, mists, or spray. Avoid breathing of
vapors, mists or spray.

7.2 STORAGE
Store away from acids. Keep container in well-ventilated area. Store under normal warehouse conditions.


SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits
and/or control mist, vapor, or spray. If ventilation is not adequate, use respiratory protection equipment. Use with functioning spray
booth or local exhaust. Use with appropriate local exhaust ventilation. Provide appropriate local exhaust ventilation on open
containers.

8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)

8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray.
The following eye protection(s) are recommended: Safety Glasses with side shields, Indirect Vented Goggles.

8.2.2 Skin Protection
Avoid skin contact.

Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Fluoroelastomer (Viton), Nitrile Rubber, Polyethylene/Ethylene
Vinyl Alcohol.

8.2.3 Respiratory Protection
Avoid breathing of vapors, mists or spray.


Page 4 of 9
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral 11/18/2003




8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.


8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
METHYL ALCOHOL ACGIH TWA 200 ppm Skin Notation*
METHYL ALCOHOL ACGIH STEL 250 ppm Skin Notation*
METHYL ALCOHOL OSHA TWA 200 ppm Skin Notation*; Table Z-1A
METHYL ALCOHOL OSHA STEL 250 ppm Skin Notation*; Table Z-1A
ROSIN ACGIH TWA Reduce exposure to as Sensitizer, see limit column
low as possible
TOLUENE ACGIH TWA 50 ppm Skin Notation*; Table A4
TOLUENE CMRG STEL 75 ppm Skin Notation*
TOLUENE OSHA TWA, 100 ppm
Vacated
TOLUENE OSHA STEL, 150 ppm
Vacated
TOLUENE OSHA TWA 200 ppm Table Z-2
TOLUENE OSHA CEIL 300 ppm Table Z-2
ZINC OXIDE ACGIH TWA - 2 mg/m3
respirable
ZINC OXIDE ACGIH STEL 10 mg/m3
ZINC OXIDE OSHA TWA - as 5 mg/m3 Table Z-1
fume
ZINC OXIDE OSHA TWA - 5 mg/m3 Table Z-1
respirable
ZINC OXIDE OSHA STEL, 10 mg/m3
Vacated - as
fume
ZINC OXIDE OSHA TWA, 10 mg/m3
Vacated - as
dust
ZINC OXIDE OSHA TWA - as total 15 mg/m3 Table Z-1
dust

* Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous
membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter
skin absorption.

VAC Vacated PEL:Vacated Permissible Exposure Limits [PEL] are enforced as the OSHA PEL in some states. Check with your local
regulatory agency.


SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)




SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES

neutral, slight odor of ammonia
Odor, Color, Grade:
Liquid
General Physical Form:


Page 5 of 9
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral 11/18/2003


No Data Available
Autoignition temperature

Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
147.00 潞F [Details: CONDITIONS: (methanol)]
Boiling point
1.1 g/ml
Density
1.10 [Ref Std: AIR=1]
Vapor Density

<=27 psia [@ 131.0000000000 潞F] [Details: MITS data]
Vapor Pressure

1.100 [Ref Std: WATER=1]
Specific Gravity
Approximately 10 Units not avail. or not appl.
pH
No Data Available
Melting point


1.00 [Ref Std: ETHER=1]
Evaporation rate
Approximately 0.09 lb HAPS/lb solids [Details: (4.6% by weight)]
Hazardous Air Pollutants
37 g/l [Test Method: tested per EPA method 24]
Volatile Organic Compounds
Approximately 50 % weight
Percent volatile
77 g/l [Test Method: tested per EPA method 24]
VOC Less H2O & Exempt Solvents
200.0 - 600.0 centipoise
Viscosity


SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.

Materials and Conditions to Avoid: Strong acids


Hazardous Polymerization: Hazardous polymerization will not occur.


Hazardous Decomposition or By-Products
Substance Condition
Aldehydes During Combustion
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Hydrogen Chloride During Combustion
Ketones During Combustion




SECTION 11: TOXICOLOGICAL INFORMATION




Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.



SECTION 12: ECOLOGICAL INFORMATION

Page 6 of 9
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral 11/18/2003



ECOTOXICOLOGICAL INFORMATION


Not determined.

CHEMICAL FATE INFORMATION

Not determined.

SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Incinerate in an industrial or commercial facility in the presence of a combustible material. Combustion
products will include HCl. Facility must be capable of handling halogenated materials.
As a disposal alternative, dispose of waste product in a facility permitted to accept chemical waste.

EPA Hazardous Waste Number (RCRA): Not regulated

Since regulations vary, consult applicable regulations or authorities before disposal.


SECTION 14:TRANSPORT INFORMATION
ID Number(s):
62-4274-5520-9, 62-4274-5535-7, 62-4274-5538-1, 62-4274-6530-7, 62-4274-6535-6, 62-4274-7530-6, 62-4274-7535-5, 62-
4274-8530-5, 62-4274-8535-4, 62-4274-9530-4, 62-4274-9531-2, 62-4274-9535-3, 62-4274-9538-7, 62-4274-9930-6, 62-4274-
9932-2, 62-4274-9935-5



Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.


SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS

Contact 3M for more information.


311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes

Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):

Ingredient C.A.S. No % by Wt
TOLUENE 108-88-3 1- 3
METHYL ALCOHOL 67-56-1 1 - 2.5
ZINC OXIDE (ZINC COMPOUNDS) 1314-13-2 1- 2




Page 7 of 9
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral 11/18/2003




STATE REGULATIONS

Contact 3M for more information.




CALIFORNIA PROPOSITION 65

Ingredient C.A.S. No. Classification
TOLUENE 108-88-3 *Developmental Toxin

* WARNING: contains a chemical or chemicals which can cause birth defects or other reproductive harm.


CHEMICAL INVENTORIES
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS),
or are exempt polymers whose monomers are listed on EINECS.

The components of this product are in compliance with the chemical notification requirements of TSCA.

Contact 3M for more information.




INTERNATIONAL REGULATIONS
Contact 3M for more information.



WHMIS: Hazardous




This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.



SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 2 Flammability: 0 Reactivity: 0 Special Hazards: None

National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are


Page 8 of 9
3M MATERIAL SAFETY DATA SHEET 3M(TM) Fastbond(TM) Contact Adhesive 30-NF Neutral 11/18/2003


presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.




No revision information is available.


DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.

3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.


3M MSDSs are available at www.3M.com




Page 9 of 9

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
A14019.asp 122-03-2
A14389.asp 461-89-2
A14539.asp 110-65-6
A14573.asp 5332-24-1
A14731.asp 71-30-7
A14915.asp 5396-89-4
A15127.asp 63352-99-8
A15168.asp 51-36-5
A15169.asp 2892-51-5
A15571.asp 97-59-6
A15665.asp 85264-33-1
A16298.asp 102-36-3
A16648.asp 934-34-9
A18264.asp 709-09-1
A18357.asp 119-75-5
A19248.asp 5231-87-8
A19418.asp 615-59-8
abccompounding_com---LA-506_MSDS.asp 64-02-8 1344-09-8 34590-94-8 1310-58-3
abccompounding_com---LA-531_MSDS.asp 144-62-7
abccompounding_com---LA-575_MSDS.asp 121-54-0
abccompounding_com---LA-701_MSDS.asp 120-32-1 90-43-7 80-46-6 67-63-0 1310-73-2 107-21-1
abdbioquest_com---M100.asp 72088-94-9
abdbioquest_com---M14010.asp 6160-78-7
abdbioquest_com---M21410.asp 63560-89-4
abdbioquest_com---M21414.asp 47623-98-3
abdbioquest_com---M21482.asp 107610-19-5
abdbioquest_com---M21483.asp 149838-22-2
abdbioquest_com---M22190.asp 7385-67-3
abelsupply_com---HGIMPREGQ1.asp 108-67-8 103-65-1 95-63-6 27881-32-9 64742-82-1 1330-20-7
abicorusa_com---AntiSpatter.asp 112-80-1 60-33-3 57-10-3 57-11-4 112-85-6 557-59-5 506-30-9
abiteccorp_com---Captex_8000.asp 538-23-8
abtekbio_com---brucella_-_isba.asp 1405-20-5 3374-05-8 1404-93-9 1400-61-9 66-81-9 1406-87-4
abtekbio_com---erythromycin_sds.asp 114-07-8
abtekbio_com---neisseria_-_isvit.asp 52-90-4 50-99-7 1184-16-3 635-39-2 150-13-0 154-07-0 7782-61-8
accessories_wintersteigerusa_com---Safety_Data_Sheet_A30.asp 7732-18-5 9010-98-4 65997-13-9 68083-03-4 8050-09-7 108-88-3 67-56-1 1314-13-2
acpchem_com---A2030F.asp 2003-01-0 73-24-5
acpchem_com---A2175F.asp 2004-01-0 51-43-4
acpchem_com---A2420F.asp 2003-01-0 33864-99-2
acpchem_com---B0250F.asp 2003-01-0 6211-24-1
acpchem_com---B1945F.asp 2003-01-0 618-36-0
acpchem_com---C2720F.asp 2003-01-0 78-86-4
acpchem_com---C6540F.asp 2003-01-0 596-27-0
acpchem_com---D0088F.asp 2003-01-0 1647-16-1
acpchem_com---D0250F.asp 2003-01-0 872-05-9
acpchem_com---S7605F.asp 2003-01-0 3118-97-6
acrelectronics_com---MSDS_7_with_1__Li-MnO2.asp 01-10-2 7439-93-2 1313-13-9 96-49-1 4437-85-8 110-71-4 33454-82-9
addifix_com---MSDS_040-2.asp 12001-26-2 9005-38-3 7647-14-5 57455-37-5 7732-18-5
adsil_com---msds-ad25.asp 67-56-1
adv-bio_com---1386.asp 18640-74-9 001-00-3
advancechemicals_ca---LaundryStainAway.asp 7320-34-5 64-02-8 7681-52-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC