MATERIAL SAFETY DATA SHEET/ANTI-SPATTER FLUID
IDENTITY AND MANUFACTURER鈥檚 INFORMATION
NFPA Rating: Health-1; Flammability-0; Reactivity-0; Special- HMIS Rating: Health-1; Flammability-0; Reactivity-0; Personal Protection-B
Manufacturer鈥檚 Name Supreme Oil Company DOT Hazard Classification: N/A
80 South Dean Street
Englewood, NJ 07631 Identity (trade name used on label): Anti-Spatter Fluid
Manufactured for: ABICOR Binzel (Alexander Binzel Corp)
Date Prepared: / / Prepared By: MSDS Number 08-753-8484 Revision: 1/ /07
Information Calls: (301)846.4196 NOTICE:
EMERGENCY RESPONSE NUMBER:
SECTION 1 - MATERIAL IDENTIFICATION AND INFORMATION
CAS * OSHA PEL ACGIH Carcinogen
COMPONENTS-CHEMICAL NAMES AND COMMON NAMES
(Hazardous Components 1% or greater; Carcinogens 0.1% or greater) NUMBER % (PPM) TLV (ppm) Ref.
SOURCE*
Anti-Spatter Fluid 3/7/8002
Oleic Glyceride 112-80-1 51.0
Linolek Glyceride 60-33-3 30.9
Palmitic Glyceride 57-10-3 12.0
Stearic Glyceride 57-11-4 2.3
Behenic Glyceride 112-85-6 2.3
Lignoceric Glyceride 557-59-5 0.8
Arachidil Glyceride 506-30-9 0.7
Non-Hazardous Ingredients 100
SECTION 2 PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point: 626F 330 Degrees Specific Gravity (H2O)=1): .92% @ 25 Degrees C
Vapor Pressure: (PSIG @ 70 F (Aerosols): NA Vapor Pressure: (Non-Aerosols)(mm Hg and Temperature): NA
Vapor Density: (Air=1): NA Evaporation Rate (=1): NA
Solubility in Water: Insoluble Water Reactive: NA
Appearance and Odor: Clear, yellow liquid above 50 Degrees F. Odorless.
SECTION 3 - FIRE AND EXPLOSION HAZARD DATA
FLAMMABILITY as per USA FLAME Auto Ignition Temperature Flammability Limits in Air by % in Volume
PROJECTION TEST (aerosols): NA NA %LEL: NA %UEL: NA
610 Degrees F
FLASH POINT AND METHODS USED (non-aerosols):
Co2 or Foam.
EXTINGUISHER MEDIA:
Apply water mist gently. Heavy application to hot oil could cause foaming. Avoid contact with hot oil.
SPECIAL FIRE FIGHT PROCEDURES:
None
UNUSUAL FIRE and EXPLOSION HAZARDS:
SECTION 4 - REACTIVITY HAZARD DATA
[X] STABLE [ ] UNSTABLE [ ] WILL [X] WILL NOT OCCUR
STABILITY: HAZARDOUS POLYMERIZATION:
Incompatibility (Mat. to Avoid): Oxidizing Agents Conditions to Avoid: None
Hazardous Decomposition Products: None
SECTION 5 - HEALTH HAZARD DATA
[ ] INHALATION [ ] INGESTION [X] SKIN ABSORPTION [ ] EYE [X] NOT HAZARDOUS
PRIMARY ROUTES OF ENTRY:
ACUTE EFFECTS;
None
Inhalation:
Reddening of eyes
Eye Contact:
Reddening of Skin
Skin Contact:
Could cause reaction similar to peanut allergy
Ingestion:
No adverse health affects
CHRONIC EFFECTS:
None
Medical conditions generally aggravated by exposure:
EMERGENCY FIRST AID PROCEDURES
Flush with water.
Eye Contact:
Wash with soap and water
Skin Contact:
NA
Inhalation:
Could cause reaction similar to peanut allergy
Ingestion:
SECTION 6 - CONTROL AND PROTECTIVE MEASURES
None
Respiratory Protection (specify type):
None
Protective Gloves:
Safety glasses or face shield.
Eye Protection:
None
Ventilation Requirements:
Normally not required.
Other protective clothing and Equipment:
Wash with soap and water.
Hygienic Work Practices:
SECTION 7 - PRECAUTIONS FOR SAFE HANDLING AND USE
Avoid losses to water ways, contain spills and pick-up used sand or absorbent material. Biodegradable.
Step to be taken if material is spilled or released:
Biodegradable - Sanitary waste treatment plant.
Waste Disposal methods:
Avoid excessive head in storage to maintain product quality.
Precautions to be taken in handling and storage:
Combustible liquid above flash point
Other Precautions and/or Special Hazards:
We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind.
* Optional.
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP