#9951 MSDS Material Safety Data Sheet (MSDS) for
Wortmannin 166B Cummings Center s Beverly, MA 01915
Orders s 877-616-CELL (2355) Support s 877-678-TECH (8324) Web s www.cellsignal.com
orders@cellsignal.com info@cellsignal.com
I. Identification VII. Reactivity Data
Product name: Wortmannin Penicillium Funiculosum Stability: Stable.
Synonyms: Wortmannin Incompatibility/Materials to avoid: Strong acids, strong bases, sensi-
tive to light.
Combustion/Decomposition products: Carbon monoxide, carbon
II. Ingredients
dioxide (the nature of decomposition products is not fully known).
Wortmannin Penicillium Funiculosum
Hazardous polymerization: Will not occur.
CAS# 19545-26-7
Formula: C23 H24 O8 VIII. Spill or Leak Procedures
Molecular weight: 428.4 g/mol Wear protective gloves, lab coat and safety glasses. Sweep up the material,
then wash down the spill site and ventilate the area. Place all waste and
contaminated materials in an appropriate waste container and dispose of in
III. Physical Data accordance with local, state and federal regulations.
To the best of our knowledge the physical properties of this product have
Waste disposal method: Add waste to a combustible solvent and burn
not been thoroughly investigated.
in an EPA-licensed chemical incinerator equipped with an afterburner and
scrubber.
Material is a solid.
Melting point: Not available.
IX. Handling and Storage
Solubility: Soluble in DMSO.
Handling: Avoid contact with skin, eyes and clothing. Protective gloves,
Appearance: Lyophilized powder.
lab coat and safety glasses should be worn when handling this product.
Storage: Store at or below 鈥?20掳C.
IV. Fire and Explosion Hazard Data
Extinguishing media: Carbon dioxide, dry chemical, water spray or
X. Exposure Control/Personal
foam. Special fire fighting procedures: If involved in fire, don NIOSH/MSHA
Protection Information
approved self-contained breathing apparatus, flame/chemical resistant.
Wear protective gloves, safety glasses and lab coat when working with this
Unusual fire and explosion hazards: This product can emit toxic
product. Work should be performed in a chemical fume hood. An eyewash
fumes under fire conditions.
station and safety shower should be in proximity to the work area. Please
dispose of all waste in accordance with federal, state and local regulations.
V. Health Hazard Data This product is sold in small quantities for biological research. No other
use is intended, and any other use may involve substantial hazards. The
To the best of our knowledge the toxicological properties of this product
This product is for research use only and is not intended for use in humans.
user of this product should be familiar with the toxicology of organic chem-
have not been thoroughly investigated.
icals and well trained in good laboratory habits.
Acute effects of overexposure: May cause skin, eye and upper respira-
The above information is believed to be correct but does not purport to be
tory irritation. May be harmful if swallowed, inhaled or absorbed through
all inclusive and shall be used only as a guide for experienced personnel.
skin.
Cell Signaling Technology, Inc. shall not be held liable to any damage
resulting from the handling of or from contact with the above product. The
VI. Emergency and First Aid burden of safe use of this material rests entirely with the user.
Procedures Updated January 2003
Swallowing: If swallowed, wash mouth out with water and call a
physician.
漏 2003 Cell Signaling Technology, Inc.
Skin: If skin contact occurs, immediately wash skin with soap and water.
Inhalation: If inhaled, remove to fresh air. If not breathing, perform CPR
and call a physician.
Eyes: If eye contact occurs, flush eyes with water for at least 15 minutes.
Assure adequate flushing by separating eyelids with fingers. Consult a
physician.
page 1 of 1
|