Date Prepared: 02/07/08
Supersedes: 04/16/02
Product Name: PolyTops Fast Set Epoxy A & B
ChemMasters
Material Safety Data Sheet
1. Chemical Product and Company Information
Product Name: PolyTops Fast Set Epoxy (part A & B)
ChemMasters In Case of Emergency Contact:
300 Edwards Street CHEMTREC 800/424-9300
Madison, Ohio 44057
440-428-2105
2. Composition / Information on Ingredients
Component A
Hazardous Components CAS # Exposure Limits % by Wt
OSHA(PEL/TWA) ACGIH (TLV/TWA) OTHER
Bisphenol-A Epoxy Resin 25068-38-6 鈥? 鈥? 鈥? <85%
5 mg/m3 5 mg/m3 __
Talc 14807-96-6 <8%
5 mg/m3 10 mg/m3
Precipitated Calcium Carbonate 1317-65-3 __ <8%
3
10 mg/m3
TiO2 1317-80-2 15 mg/m __ <2%
Component B
Hazardous Components CAS # Exposure Limits % by Wt
OSHA(PEL/TWA) ACGIH (TLV/TWA) OTHER
Trade Secret Amine blend 111-41-7 NE NE <50%
___
143-23-7 NE NE
140-31-8 NE NE __
694-83-7 NE NE __
2,4,6- Tri(dimethylaminomethyl)phenol
10 mg/m3 5 mg/m3
90-72-2 __ <5%
10 mg/m3 5 mg/m3 ___
Precipitated Calcium Carbonate 1317-65-3 <5%
___
Calcium Carbonate 471-34-1 NE NE >50%
3. Hazards Identification
CAUTION
Causes eye irritation
Causes skin irritation and/or allergic skin reaction
Potential Health Hazards - Acute
Eye: May produce irritation, sensitization.
Skin: May produce irritation, sensitization.
Inhalation: May produce irritation, sensitization.
Ingestion: May produce irritation, sensitization.
Potential Health Effects - Chronic
Carcinogenicity: NTP IARC Monographs OSHA Regulated
NO NO NO
1
Date Prepared: 02/07/08
Supersedes: 04/16/02
Product Name: PolyTops Fast Set Epoxy A & B
4. First Aid Measures
Eye: Immediately flush with plenty of water for at least 15 minutes. Get medical attention.
Skin: Flush immediately with plenty of water for at least 15 minutes while removing contaminated clothing.
Solvents should not be used because they carry the irritant into the skin.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Get medical attention.
Ingestion: Seek medical attention immediately
5. Fire Fighting Measures
Flash Point (method used): >200oF (TCC)
Flammable Limits (% volume in air): Lower = No data available Upper = No data available
Auto Ignition Temperature: No data available
Extinguishing Media: Dry chemicals, CO2, Halon, water spray or foam.
Hazardous Decomposition Products: Carbon dioxide and/or carbon monoxide & Nitrous Oxides.
Fire Fighting Instructions: Remove all ignition sources. Wear self contained breathing apparatus and complete
personal protective equipment when entering confined areas where potential exposure to vapors or products of
combustion exists.
6. Accidental Release Measures
Spill: Absorb with inert material, then place in chemical waste container for later disposal.
7. Handling and Storage
Handling: Use with adequate ventilation. Avoid contact with skin and eyes. Always use good industrial hygiene
practices and safety guidelines when dealing with this potentially hazardous product.
Storage: Keep containers closed and store in a dry, well ventilated area.
8. Exposure Controls / Personal Protection
Exposure Controls: Mechanical exhaust should be used. A source of clean water should be available for flushing eyes
and skin.
Personal Protection: Protective clothing, chemical splash goggles and rubber gloves.
9. Physical and Chemical Properties
Appearance & Odor: A: White gel, mild odor B: Gray Gel, characteristic odor of amine
Boiling Point: No data available
Melting Point: Not applicable
Vapor Pressure (mm/Hg): No data available
Vapor Density (Air = 1): No data available
Solubility in Water: Negligible (<5%)
Specific Gravity (H2O = 1): A: 1.2 B: 1.64
Evaporation Rate (n-Butyl Acetate = 1): Not applicable
10. Stability and Reactivity
Chemical Stability: Stable
Conditions to Avoid: Excessive heat
Incompatibility (materials to avoid): Contamination with strong acids, bases, amines and mercaptans.
Hazardous Decomposition or By-products: Thermal decomposition may yield carbon monoxide and/or dioxide.
Hazardous Polymerization: Will not occur
2
Date Prepared: 02/07/08
Supersedes: 04/16/02
Product Name: PolyTops Fast Set Epoxy A & B
11. Toxicological Information
Components Oral LD50 Dermal LD50 Inhalation LC50
(rat) (rabbit) (rat)
Bisphenol-A Epoxy Resin 2 g/kg 20 g/kg 鈥?
12. Ecological Information
No data available
13. Disposal Considerations
Dispose of in accordance with all federal, state and local regulations. If uncertain of local regulations in your area, contact
the proper environmental authorities for disposal.
This material does not meet RCRA鈥檚 characteristic definition of ignitability, corrosivity, or reactivity, and is not listed in
40 CFR 261.33. The toxicity characteristic (TC), however has not been evaluated by the Toxicity Characteristic Leaching
Procedure (TCLP).
14. Transportation Information
For U S National , International and Air Shipments:
Shipping Description: Amines, Liquid, Corrosive, N.O.S. (Aminopropyldiethanolamine), 8, UN2735, PG III
Emergency Response Guide Number: 153
Hazard Class: Corrosive
15. Regulatory Information
OSHA: This material is hazardous by definition of Hazardous Communications Standard (29 CFR 1910.1200)
CERCLA Reportable Quantity: Not applicable
SARA Title III:
Section 311/312 hazard categories: acute health, delayed health
Section 313 reportable ingredients:
Components CAS # Maximum %
Not applicable
16. Other Information
MSDS Status: Reviewed 02/07/08
Industrial Abbreviation Legend on page 4 of this MSDS.
3
Date Prepared: 02/07/08
Supersedes: 04/16/02
Product Name: PolyTops Fast Set Epoxy A & B
Industrial Abbreviation Legend
mg/m3
ACGIH American Conference of Governmental Industrial milligrams per cubic meter
NIOSH National Institute for Occupational Safety and Health
Hygienists
NTP National Toxicology Program
CAA Clean Air Act (EPA)
CERCLA Comprehensive Environmental Response, OSHA Occupational Safety and Health Administration
PEL Permissible Exposure Limit
Compensation & Liability Act of 1980 (Superfund) (EPA)
ppm parts per million
CNS Central Nervous System
CWA Clean Water Act (EPA) RCRA Resource Conservation and Recovery Act (EPA)
SARA EPA鈥檚 Superfund Amendment and Reauthorization
DOT Department of Transportation
Act (EPA)
EPA Environmental Protection Agency
g/kg grams per kilogram STEL Short-Term Exposure Limit, ACGIH terminology
TLV Threshold Limit Value
IARC Internal Agency for Research on Cancer
TWA Time-Weighted Average
LC50 Lethal Concentration in which 50% of the test animals are
expected to die
LD50 Lethal Dose in which 50% of the test animals are
expected to die
THIS PRODUCT IS FORMULATED AND LABELED FOR
INDUSTRIAL AND COMMERCIAL APPLICATION ONLY
The information contained herein is given in good faith and based on data considered accurate. However, no warranty is
expressed or implied regarding the accuracy of these data or the results to be obtained from the use thereof. ChemMasters
assumes no responsibility for personal injury or property damage to vendees, users or third parties caused by the material.
Such vendees or users assume all risks associated with the use of the material.
4
This is the last page of this MSDS.
|