Material Safety Data Sheet Aircraft Specialties Lubricants
CamGuard
Page 1 of 2
SECTION 1 鈥? PRODUCT AND COMPANY NAME
Product Name: CamGuard
Aircraft Specialties Lubricants
Company Name:
2860 N. Sheridan Rd., Tulsa, OK 74115
Address:
(800) 826-9252
Phone Number:
SECTION 2 鈥? COMPOSITION INFORMATION OR INGREDIENTS
Lubricant additive mixture
Chemical Description:
Thiophosphate derivative 8-12%
Hazardous Ingredients:
Benzotriazole derivative 1-3%
Health 鈥? 2 Flammability 鈥? 0 Reactivity 鈥? 0
Hazard Rating:
SECTION 3 鈥? POSSIBLE HAZARDS
Effects of Exposure:
May cause irritation, redness
Eyes:
May cause irritation.
Skin:
Mist may irritate mucous membranes.
Inhalation:
Effects of Repeated Exposure:
Prolonged contact can cause severe irritation, redness, or
Eyes:
blurred vision.
Prolonged contact may cause irritation.
Skin:
Mist may irritate mucous membranes.
Inhalation:
SECTION 4 鈥? FIRST AID MEASURES
Immediately flush with copious amounts of water for at
Exposure to Eyes:
least 15 minutes. Consult physician.
Immediately wash with soap and water. If irritation
Exposure to Skin:
persists, contact physician. Launder contaminated
clothing before reuse.
Remove to fresh air. If irritation persists, contact
Exposure by Inhalation:
physician.
If patient is conscious and can swallow, give 2 glasses of
Exposure by Ingestion:
water. DO NOT induce vomiting as directed by medical
personnel. Call physician or poison control immediately.
SECTION 5 鈥? FIRE FIGHTING MEASURES
> 360掳F Closed Cup.
Flash Point & Method:
CO2, Dry Chemical, BC/ABC Extinguishers.
Extinguishing Media:
Unusual Fire and Explosion Hazards: Do not direct a solid stream of water or foam into hot,
burning pools, this may cause frothing and increase fire
intensity. Use self-contained breathing apparatus and
body-covering protective clothing.
SECTION 6 鈥? ACCIDENTAL RELEASE MEASURES
Containment for large spills: Soak up with sand or sweeping compound and dispose as solid
waste.
Containment for small spills: Contain and dispose ensuring conformity with local disposal
regulations.
MSDS ASL CamGuard
Page 2 of 2
SECTION 7 鈥? HANDLING AND STORAGE
Use good hygiene practices when handling product.
Handling:
Keep containers closed when not in use. Store in a cool,
Storage:
dry, well-ventilated place. Avoid direct sunlight, heat
sources, moisture, and strong oxidizing agents.
Store between 30F and 100F.
SECTION 8 鈥? EXPOSURE CONTROLS AND PERSONAL PROTECTION
TWA of 5mg/m3 for oil mist.
Occupation Exposure Level:
Not required.
Respiratory Protection:
Special not required.
Ventilation:
Impervious.
Protective Gloves:
Chemical goggles.
Eye Protection:
Wear protective clothing to prevent skin contact.
Other Protective Equipment:
Eyewash and safety showers in work area.
SECTION 9 鈥? PHYSICAL AND CHEMICAL PROPERTIES
Clear amber liquid with mild odor
Appearance:
Not determined
Boiling Point:
0.98 - 1.02
Specific Gravity @ 25掳C:
0
VOC:
Negligible
Vapor Pressure @ 20掳C:
NA
Vapor Density: (Air=1)
36-46
Viscosity cSt.@ 40掳C:
Negligible
Solubility in Water:
Negligible
Evaporation Rate: (butyl acetate)
SECTION 10 鈥? STABILITY AND REACTIVITY
Stable.
Stability:
Will not occur.
Hazardous Polymerization:
Strong oxidizing agents
Conditions to Avoid:
Hazardous Decomposition Products: Oxides of carbon, phosphorus, sulfur, and nitrogen
SECTION 11 鈥? TOXICOLOGICAL INFORMATION
Information not available.
SECTION 12 鈥? ECOLOGICAL INFORMATION
Information not available.
SECTION 13 鈥? DISPOSAL CONSIDERATIONS
In accordance with local, state and federal regulations.
Waste Disposal Method:
SECTION 14 鈥? TRANSPORTATION INFORMATION
Not regulated
DOT Hazard Class:
>360掳F
Flash point
Class: Free
ADR/RID
Class: Free
IMO
Class: Free
ICAO
SECTION 15 鈥? REGULATORY INFORMATION
Listed in TSCA Inventory.
TSCA:
SARA Title III 鈥? Sections 312 & 313: None
SECTION 16 鈥? OTHER INFORMATION
The information contained herein is, to the best of our knowledge and belief, accurate. All chemicals may present
unknown health hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist. Final determination of suitability of the chemical and application of
such products is the sole responsibility of the user. No representations or warranties, either expressed or implied, of
merchantability, fitness for a particular purpose or any other nature are made hereunder with respect to the information
contained herein or the chemical to which the information refers. It is the sole responsibility of the user to comply with
all applicable Federal, State and Local Laws and Regulations. REVISED: 08-28-07 by E. Kollin
|