3M MATERIAL SAFETY DATA SHEET Concrete Repair DP-600, Non-Sag, Gray 07/21/2003
Material Safety Data Sheet
Copyright, 2003, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
PRODUCT NAME: Concrete Repair DP-600, Non-Sag, Gray
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 07/21/2003
Supercedes Date: 10/18/2002
Document Group: 18-1146-2
Formerly known as DYNAMix(TM) Non-Sag Rapid Set 6142-1, Gray.
ID Number(s):
62-2652-1230-8, 62-2652-1235-7, 62-2652-5030-8, 62-2652-5037-3
This product is a kit or a multipart product which consists of multiple, independently packaged components. An MSDS for
each of these components is included. Please do not separate the component MSDSs from this cover page. The document
numbers of the MSDSs for components of this product are:
18-1134-8, 18-1141-3
Revision Changes:
Copyright was modified.
Kit: Component document group number(s) was modified.
Section 1: Product name was modified.
Kit: Product name was modified.
Kit: Division name was modified.
Kit: ID number(s) was modified.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
Page 1 of 2
3M MATERIAL SAFETY DATA SHEET Concrete Repair DP-600, Non-Sag, Gray 07/21/2003
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
Page 2 of 2
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B) 01/29/2004
Material Safety Data Sheet
Copyright, 2004, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B)
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 01/29/2004
Supercedes Date: 07/21/2003
Document Group: 18-1134-8
Product Use:
Specific Use: Two-part urethane adhesive/sealant.
Formerly known as DYNAMix(TM) Non-Sag Rapid Set 6142-1, Gray.
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
polyether polyol 9082-00-2 40 - 70
propoxylated trimethylolpropane 25723-16-4 10 - 30
tetrakis(2-hydroxypropyl)ethylenediamine 102-60-3 10 - 30
m-xylene-alpha,alpha'-diamine 1477-55-0 1- 5
amorphous silica 68611-44-9 1- 5
bis(1,2,2,6,6-pentamethyl-4-piperidinyl) sebacate 41556-26-7 0.1 - 1
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Viscous
Odor, Color, Grade: Slight ammonia like odor, gray.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause allergic skin reaction.
Page 1 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B) 01/29/2004
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.
Vapors released during curing may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or
hazy vision.
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Skin Contact:
Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching.
Prolonged or repeated exposure may cause:
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Inhalation:
Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
Vapors released during curing may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.
Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person.
Get immediate medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Page 2 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B) 01/29/2004
Not Applicable
Autoignition temperature
>=290 潞F [Test Method: Tagliabue Closed Cup]
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA).
Unusual Fire and Explosion Hazards: Non-flammable: ordinary combustible material. Not applicable.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Ventilate the area with fresh air. Contain spill. For larger spills, cover drains and
build dikes to prevent entry into sewer systems or bodies of water. Collect as much of the spilled material as possible. Clean up
residue with an appropriate organic solvent. Read and follow safety precautions on the solvent label and MSDS. Collect the resulting
residue containing solution. Place in a closed container approved for transportation by appropriate authorities. Dispose of collected
material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid eye contact with vapors, mists, or spray. Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid
prolonged or repeated skin contact. Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap
and water. Avoid contact with oxidizing agents.
7.2 STORAGE
Store away from acids. Store away from oxidizing agents.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Provide appropriate local exhaust for cutting, grinding, sanding or machining.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
Page 3 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B) 01/29/2004
8.2.1 Eye/Face Protection
Avoid eye contact with vapors, mists, or spray. Avoid eye contact.
8.2.2 Skin Protection
Avoid prolonged or repeated skin contact. Avoid skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Butyl Rubber.
8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining. Avoid breathing of vapors, mists or spray.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges. Consult the current 3M
Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
bis(1,2,2,6,6-pentamethyl-4-piperidinyl) CMRG TWA 1 mg/m3
sebacate
m-xylene-alpha,alpha'-diamine ACGIH CEIL 0.1 mg/m3 Skin Notation*
m-xylene-alpha,alpha'-diamine OSHA CEIL 0.1 mg/m3 Table Z-1A
* Substance(s) refer to the potential contribution to the overall exposure by the cutaneous route including mucous
membrane and eye, either by airborne or, more particularly, by direct contact with the substance. Vehicles can alter
skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Viscous
Specific Physical Form:
Slight ammonia like odor, gray.
Odor, Color, Grade:
Liquid
General Physical Form:
Not Applicable
Autoignition temperature
>=290 潞F [Test Method: Tagliabue Closed Cup]
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
>=400 潞F
Boiling point
>=1 [Ref Std: AIR=1]
Vapor Density
Page 4 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B) 01/29/2004
Not Applicable
Vapor Pressure
1.03
Specific Gravity
Not Applicable
pH
No Data Available
Melting point
Negligible
Solubility in Water
<=1 [Ref Std: WATER=1]
Evaporation rate
00 % weight [Test Method: Calculated]
Hazardous Air Pollutants
<=10 g/l [Test Method: calculated per EPA method 24]
Volatile Organic Compounds
<=5 g/l [Test Method: calculated per EPA method 24] [Details: when mixed 1:1 with Part
Volatile Organic Compounds
A]
<=1 % [Test Method: Estimated]
Percent volatile
<=0.5 % [Test Method: Estimated] [Details: when mixed 1:1 with Part A]
Percent volatile
VOC Less H2O & Exempt <=10 g/l [Test Method: calculated per EPA method 24]
Solvents
VOC Less H2O & Exempt <=5 g/l [Test Method: calculated per EPA method 24] [Details: when mixed 1:1 with
Solvents Part A]
Viscosity 2,000 - 2,700 centipoise
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Strong acids; Strong oxidizing agents
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Hydrogen Chloride During Combustion
Oxides of Nitrogen During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
Page 5 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B) 01/29/2004
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of completely cured (or polymerized) wastes in a sanitary landfill. As a disposal alternative,
incinerate uncured product in an industrial or commercial incinerator in the presence of a combustible material.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
ID Number(s):
62-2652-8535-3, 62-2652-9535-2
Not regulated per U.S. DOT, IATA or IMO.
These transportation classifications are provided as a customer service. As the shipper YOU remain responsible for
complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M's
transportation classifications are based on product formulation, packaging, 3M policies and 3M's understanding of
applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information
applies only to transportation classification and not the packaging, labeling, or marking requirements. The original 3M
package is certified for U.S. ground shipment only. If you are shipping by air or ocean, the package may not meet
applicable regulatory requirements.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes
STATE REGULATIONS
Contact 3M for more information.
Page 6 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B) 01/29/2004
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
HMIS Hazard Classification
Health: 2 Flammability: 1 Reactivity: 1 Protection: X - See PPE section.
Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the
workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended
for use in emergency situations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of
the National Paint and Coatings Association (NPCA).
Revision Changes:
Section 1: Product name was modified.
Copyright was modified.
Section 5: Fire fighting procedures information was modified.
Section 6: Release measures information was modified.
Section 10: Hazardous decomposition or by-products table was modified.
Section 2: Ingredient table was modified.
Page Heading: Product name was modified.
Section 8: Exposure guidelines ingredient information was modified.
Section 9: Property description for optional properties was modified.
Section 13: EPA hazardous waste number (RCRA) heading was added.
Section 13: EPA hazardous waste number (RCRA) information was added.
Section 14: ID Number heading was added.
Section 14: ID Number(s) was added.
Section 12: Ecotoxicological phrase was added.
Section 12: Chemical Fate phrase was added.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use
and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or
application.
Page 7 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair DP-600, Non-Sag, Gray (Part B) 01/29/2004
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer
may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness
or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS
available directly from 3M.
Page 8 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A) 01/29/2004
Material Safety Data Sheet
Copyright, 2004, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A)
MANUFACTURER: 3M
DIVISION: Industrial Adhesives and Tapes
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 01/29/2004
Supercedes Date: 07/21/2003
Document Group: 18-1141-3
Product Use:
Specific Use: Two-part urethane adhesive/sealant.
Formerly known as DYNAMix(TM) Non-Sag Rapid Set 6142-1, Gray.
SECTION 2: INGREDIENTS
Ingredient C.A.S. No. % by Wt
4,4'-diphenylmethane diisocyanate 101-68-8 30 - 60
diphenylmethanediisocyanate prepolymer 68424-09-9 15 - 40
poly(diphenylmethane-4,4'-diisocyanate) 25686-28-6 15 - 40
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Viscous
Odor, Color, Grade: Low or no detectable odor, clear.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards: May cause allergic skin reaction. May cause allergic respiratory
reaction.
Page 1 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A) 01/29/2004
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.
Vapors released during curing may cause eye irritation. Signs/symptoms may include redness, swelling, pain, tearing, and blurred or
hazy vision.
Moderate Eye Irritation: Signs/symptoms may include redness, swelling, pain, tearing, and blurred or hazy vision.
Skin Contact:
Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, and itching.
Prolonged or repeated exposure may cause:
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Inhalation:
Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
Vapors released during curing may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.
Upper Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.
Prolonged or repeated exposure may cause:
Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, nausea, diarrhea and vomiting.
Target Organ Effects:
Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates.
SECTION 4: FIRST AID MEASURES
Page 2 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A) 01/29/2004
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: Remove person to fresh air. If signs/symptoms develop, get medical attention.
If Swallowed: Do not induce vomiting. Give victim two glasses of water. Never give anything by mouth to an unconscious person.
Get immediate medical attention.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Not Applicable
Autoignition temperature
>=290 潞F [Test Method: Tagliabue Closed Cup]
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA). Water may be used to blanket the fire.
Unusual Fire and Explosion Hazards: Non-flammable: ordinary combustible material. Not applicable.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Refer to other sections of this MSDS for information regarding physical and health hazards,
respiratory protection, ventilation, and personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more information
on handling and managing the spill. Evacuate unprotected and untrained personnel from hazard area. The spill should be cleaned up
by qualified personnel. Ventilate the area with fresh air. Contain spill. For larger spills, cover drains and build dikes to prevent entry
into sewer systems or bodies of water. Pour isocyanate decontaminant solution (90% water, 8% concentrated ammonia, 2% detergent)
on spill and allow to react for 10 minutes. Or pour water on spill and allow to react for more than 30 minutes. Cover with absorbent
material. Place in a container approved for transportation by appropriate authorities, but do not seal the container for 48 hours to
avoid pressure build-up. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
Page 3 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A) 01/29/2004
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid eye contact with vapors, mists, or spray. Avoid breathing of dust created by cutting, sanding, grinding or machining. Do not
breathe vapors. Avoid prolonged or repeated skin contact. Do not eat, drink or smoke when using this product. Wash exposed areas
thoroughly with soap and water. Avoid contact with water to prevent potentially violent reaction or fire.
7.2 STORAGE
Store away from acids. Keep container in well-ventilated area.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Use with appropriate local exhaust ventilation. Do not use in a confined area or areas with little or no air movement. Provide
appropriate local exhaust ventilation on open containers. Provide appropriate local exhaust for cutting, grinding, sanding or
machining.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact. Avoid eye contact with vapors, mists, or spray.
8.2.2 Skin Protection
Avoid skin contact. Avoid prolonged or repeated skin contact.
Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with
your glove and/or protective clothing manufacturer for selection of appropriate compatible materials.
Gloves made from the following material(s) are recommended: Butyl Rubber, Nitrile Rubber.
8.2.3 Respiratory Protection
Avoid breathing of dust created by cutting, sanding, grinding or machining. Do not breathe vapors.
Select one of the following NIOSH approved respirators based on airborne concentration of contaminants and in accordance with
OSHA regulations: Half facepiece or fullface air-purifying respirator with organic vapor cartridges. Consult the current 3M
Respiratory Selection Guide for additional information or call 1-800-243-4630 for 3M technical assistance.
8.2.4 Prevention of Swallowing
Do not eat, drink or smoke when using this product. Wash exposed areas thoroughly with soap and water.
8.3 EXPOSURE GUIDELINES
Ingredient Authority Type Limit Additional Information
FREE ISOCYANATES 3M TWA 0.005 ppm
FREE ISOCYANATES 3M STEL 0.02 ppm
4,4'-diphenylmethane diisocyanate ACGIH TWA 0.005 ppm
4,4'-diphenylmethane diisocyanate OSHA CEIL 0.02 ppm Table Z-1
Page 4 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A) 01/29/2004
SOURCE OF EXPOSURE LIMIT DATA:
ACGIH: American Conference of Governmental Industrial Hygienists
CMRG: Chemical Manufacturer Recommended Guideline
OSHA: Occupational Safety and Health Administration
AIHA: American Industrial Hygiene Association Workplace Environmental Exposure Level (WEEL)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Viscous
Specific Physical Form:
Low or no detectable odor, clear.
Odor, Color, Grade:
Liquid
General Physical Form:
Not Applicable
Autoignition temperature
>=290 潞F [Test Method: Tagliabue Closed Cup]
Flash Point
Not Applicable
Flammable Limits - LEL
Not Applicable
Flammable Limits - UEL
>=400 潞F
Boiling point
>=1 [Ref Std: AIR=1]
Vapor Density
<=0.000004 mmHg [@ 68 潞F]
Vapor Pressure
1.11
Specific Gravity
Not Applicable
pH
No Data Available
Melting point
Negligible
Solubility in Water
<=1 [Details: Gels with exposure to humidity.]
Evaporation rate
<=10 g/l [Test Method: calculated per EPA method 24]
Volatile Organic Compounds
<=5 g/l [Test Method: calculated per EPA method 24] [Details: when mixed 1:1 with Part
Volatile Organic Compounds
B]
<=1 % [Test Method: Estimated]
Percent volatile
<=0.5 % [Test Method: Estimated] [Details: when mixed 1:1 with Part B]
Percent volatile
VOC Less H2O & Exempt <=10 g/l [Test Method: calculated per CARB title 2]
Solvents
VOC Less H2O & Exempt <=5 g/l [Test Method: calculated per EPA method 24] [Details: when mixed 1:1 with
Solvents Part B]
Viscosity 1,200 - 2,600 centipoise
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Water; Strong acids; Strong bases
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance Condition
Page 5 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A) 01/29/2004
Carbon monoxide During Combustion
Carbon dioxide During Combustion
Oxides of Nitrogen During Combustion
Toxic Vapor, Gas, Particulate During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Cure (harden, set, or react) the product according to product instructions. Dispose of completely
cured (or polymerized) wastes in a sanitary landfill. As a disposal alternative, incinerate uncured product in an industrial or
commercial incinerator in the presence of a combustible material.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
ID Number(s):
62-2752-8535-1, 62-2752-9535-0
Not regulated per U.S. DOT, IATA or IMO.
These transportation classifications are provided as a customer service. As the shipper YOU remain responsible for
complying with all applicable laws and regulations, including proper transportation classification and packaging. 3M's
transportation classifications are based on product formulation, packaging, 3M policies and 3M's understanding of
applicable current regulations. 3M does not guarantee the accuracy of this classification information. This information
applies only to transportation classification and not the packaging, labeling, or marking requirements. The original 3M
package is certified for U.S. ground shipment only. If you are shipping by air or ocean, the package may not meet
Page 6 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A) 01/29/2004
applicable regulatory requirements.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - Yes Delayed Hazard - Yes
Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):
Ingredient C.A.S. No % by Wt
4,4'-diphenylmethane diisocyanate 101-68-8 30 - 60
(Diisocyanates (EPCRA 313))
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
Contact 3M for more information.
The components of this product are in compliance with the chemical notification requirements of TSCA.
INTERNATIONAL REGULATIONS
Contact 3M for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: OTHER INFORMATION
HMIS Hazard Classification
Health: 2 Flammability: 1 Reactivity: 1 Protection: X - See PPE section.
Page 7 of 8
3M MATERIAL SAFETY DATA SHEET 3M(TM) Concrete Repair 600, Non-Sag, Gray (Part A) 01/29/2004
Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the
workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended
for use in emergency situations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of
the National Paint and Coatings Association (NPCA).
Revision Changes:
Section 1: Product name was modified.
Copyright was modified.
Section 5: Fire fighting procedures information was modified.
Section 6: Release measures information was modified.
Section 8: Eye/face protection phrase was modified.
Section 8: Skin protection phrase was modified.
Section 2: Ingredient table was modified.
Page Heading: Product name was modified.
Section 15: Inventories information was modified.
Section 15: EPCRA 313 information was modified.
Section 8: Exposure guidelines ingredient information was modified.
Section 9: Property description for optional properties was modified.
Section 14: ID Number heading was added.
Section 14: ID Number(s) was added.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF
PERFORMANCE OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use
and application of a 3M product, some of which are uniquely within the user's knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for user's method of use or
application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer
may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness
or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS
available directly from 3M.
Page 8 of 8
|