Material
Safety
FOR CHEMICAL EMERGENCY SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT
CALL (CHEMTREC) 1-800-424-9300. THIS MSDS COMPLIES WITH 29 CFR
Data Sheet
1919.1200 (THE HAZARD COMMUNICATION STANDARD)
Section 1 - Chemical Product and Company Identification
Distributor Name: Alpha Professional Tools
Product / Chemical Name:
Address: 250 Braen Ave. Wyckoff, NJ 07481
Rust Stain Remover Gel (RSR-2000) Emergency Tel. No.: 1-800-648-7229
Chemical Family: Mercaptan, Ammoium salt
Trade Name: Ammonium thioglycolate
Section 2 - Hazardous Ingredients of Material
Component or Material Chemical Names CAS No. %by TLV(Units)
Ammonium thioglycolate 5421-46-5 53
Water 37
Rice Powder 10
Section 3 - Physical Data for Material
Vapor Pressure
Boiling Point:
Vapor Density (AIR=1)
Evaporation Rate (Ether=1)
% Volatiles by VOL.070F
Solubility:
pH: 7
Specific Gravity R, 0=1: 1.245(25C)
Appearance & Odor: Colorless liquid, characteristic
odor
Section 4 - Fire and Explosion Hazard of Material
Special Fire Fighting Procedures: Use chemical
Flash Point (Method Used): No data available
respiratory protection or self breathing apparatus. Use
Extinguishing Media: Water spray, dry chemical or
protective gloves and other clothing.
chemical foam
Unusual Fire & Explosion Hazards: Sulfur and carbon
oxides released when burned.
Section 5 - Emergency and First Aid Procedures
Eyes: Flush eyes, if exposed with water for 15 minutes, Inhalation: Get medical attention.
then see a physician. Ingestion: Do not induce vomiting. Seek immediate
Skin: Wash exposed area thoroughly with soap and medical attention.
water.
Section 6 - Health Hazard Data
Threshold Limit Value: Unknown Eyes: May cause irritation
Effects of Overexposure Inhalation: Unknown Chronic Overexposure Effects:
Skin: May cause irritation
Section 7 - Reactivity Data
Hazardous Decomposition Products: Sulfur dioxide
Conditions Contributing to Instability: Light, Air
Conditions Contributing to Polymerization: Not
Incompatibility: Oxidizing materials, Aikaleis, metal
occur
surfaces.
Doc# 514
Section 8 - Spill and Leak Procedures
Steps to be Taken if Material is Released or Spilled: Neutralizing Chemicals
Remove sources of spark or combustion. Sweep up spilled Waste Disposal Method: Dispose by incineration.
material.
Section 9 - Ventilation and Personal Protective Equipment
Ventilation Requirements: Use adequate ventilation. Eyes: Chemical safety goggles
Respiratory: Cartridge type respirator rated for organic Gloves: Butyl rubber quantiet type
chemical exposure. Other Clothing and Equipment:
Section 10 - Special Precautions Including Storage
Precautions to be taken in handling and storage: Avoid
contact of liquid with skin or eyes. Store in a cool, dry place.
D.O.P Shipping Classification:
Doc# 514
|