DATE: 18/01/99 VERSION 02
SAFETY DATA SHEET according to DM 28-1-1992
PRODUCT : DOMO 10 PART B Pag.1/5
1 IDENTIFICATION OF THE SUBSTANCE, COMPOUND AND MANUFACTURER
Product identification: DOMO 10, Part B
Manufacturer identification:TENAX SPA, VIA I MAGGIO, 226/263
37020 VOLARGNE - VERONA - ITALY
TELEPHONE: 045鈥?6860222
FAX: 045鈥?6862456
Emergency Response Number : INFOTRAC 1-800-535-5053
2 COMPOSITION AND INFORMATION ABOUT THE INGREDIENTS
Chemical description: Hardener for epoxy resin
Modified cycloaliphatic amine
Composition and information about the ingredients
Number weight % CAS number Chemical description
1 <17 100-51-6 Benzyl alcohol
2 <9 2855-15-2 Modified cycloaliphatic amine
3 >50 inert mineral fillers
Number EEC number Symbols Cautions
1 603-057-00-5 Xn R 20/22
2 612-067-00-9 C R 21/22-34-43
3 no dangers
3 HAZARDS
Irritates the skins, the eyes and the lungs. It may be sensitive to certain people.
4 FIRST AID
Symptoms and effects may cause irritation to the eyes, skin and lungs
First aid
In general In serious cases, consult a doctor. Remove contaminated clothing.
Inhaling Take the patient to a well-ventilated area. If the patient has lost
consciousness, let him/her stay firm on one side while he/she is being
moved
Skin Immediately wash the skin with soap and water
Eyes Flush with running water for a few minutes keeping the eyes open
Swallowing If pain persists, consult a doctor
DATE: 18/01/99 VERSION 02
SAFETY DATA SHEET according to DM 28-1-1992
PRODUCT : DOMO 10 PART B Pag.2/5
5 FIRE FIGHTING
Fire extinguishing agents carbon dioxide, powder or sprayed water, carbon dioxide.
Put out big fire with sprayed water or alcohol resistant foam.
Combustion products No harmful substances have been recorded after combustion.
Specific safety devices Wear a respirator
6 WHAT TO DO IN CASE OF SPILLAGE
Personal precautions Wear adequate protective clothing
Environment protection Do not let the product into sewers, quarries or basements
Cleaning up Clean up with absorbing material (sand, infusorial earth, acid
binder, universal binder, sawdust). Use adequate systems
capable of neutralising the effect of the product. The material
should be disposed of as described at point 13.
7 HANDLING AND STORAGE
Handling For safe handling, provide adequate ventilation/exhaust systems in the work areas
Storage requirements Store in a cool place and keep the containers tightly closed.
8 EXPOSURE AND PERSONAL PROTECTION
Inspection Make sure the working environment is adequately ventilated.
Personal protection
Respiratory system No protective masks are not required in well ventilated places.
Hands Use protective gloves
Eyes Use goggles.
Skin and body Observe the precautions recommended for handling chemicals
9 PHYSICAL AND CHEMICAL PROPERTIES
State paste
Colour white
Odour ammonia-like
Boiling point > 200掳C
Solubility in water slightly soluble
Flash point >100掳C
Spontaneous ignition temperature: the product does not spontaneously catch fire
DATE: 18/01/99 VERSION 02
SAFETY DATA SHEET according to DM 28-1-1992
PRODUCT : DOMO 10 PART B Pag.3/5
Vapour pressure at 20掳C: <0.15 mbar
Density at 20掳C: 1.30-1.35 g/cu.cm
pH value at 20掳C: 11
Dynamic viscosity at 20掳C: >350000 cps
10 STABILITY AND REACTIVITY
Stability The product does not decompose if used according to instructions
Dangerous reactions No dangerous reactions have been recorded.
Harmful substances produced after decomposition No harmful substances have been
recorded.
11 INFORMATION ABOUT TOXICITY
Acute toxicity:
Values LD/LC 50 relevant for classification
Components Type Value Species
Benzyl alcohol oral 1230 mg/kg rat
cutaneous 2000 mg/kg rat
Pure phenol oral 414 mg/kg rat
cutaneous 670 mg/kg rat
by inhaling 316 mg/l/4 h rat
Irritation
Skin Corrosive to the skin and mucous membrane
Eyes Strong irritation and risk of serious injury to the eyes
Sensitivity sensitive when it comes into contact with the skin
Other information If swallowed, it causes serious damage to the oral cavity, pharynx,
oesophagus and stomach.
12 EFFECTS ON THE ENVIRONMENT
Precautions effects on water (class 1 D): slightly dangerous
Do not let it undiluted or in large amounts into ground water, watercourses
and sewers.
DATE: 18/01/99 VERSION 02
SAFETY DATA SHEET according to DM 28-1-1992
PRODUCT : DOMO 10 PART B Pag.4/5
13 DISPOSAL
Product For products catalysed or in liquid state, they should be disposed of in dumping sites or
in authorised incinerators. The transport to dumping sites should be performed by
authorised companies and firms
14 TRANSPORT
By road and by rail Class ADR/RID: 8 corrosive substances
UN no:2735
By sea IMDG Code: 8
Package, Class III
By air Class ICAO/IATA: 8
UN no: 2735
Package, Class III
15 REGULATIONS
Harmful components modified cycloaliphatic amine (corrosive)
Symbols conforming with Law no. 256 of 29.5.1974
Symbol Corrosive C
Warning statements (R) 20/21/22 Harmful if inhaled, in contact with the skin and swallowed.
34 may cause burns.
43 may be sensitive when in contact with the skin.
Cautions (S) 36/37/39 Use protective clothing and adequate gloves; protect your
eyes/face.
26 In case of contact with the eyes, thoroughly wash with water and
consult a doctor.
28 In case of contact with the skin, thoroughly wash with water and
soap.
DATE: 18/01/99 VERSION 02
SAFETY DATA SHEET according to DM 28-1-1992
PRODUCT : DOMO 10 PART B Pag.5/5
16 OTHER INFORMATION
n.a. = irrelevant
n.d. = not provided
The information presented herein is based on data considered to be accurate at the date of preparation of this Material
Safety Data Sheet. However, no warranty or representation, express or implied, is made as to the accuracy or
completeness of the foregoing data and safety information, nor is any authorisation given or implied to practice any
patented invention without a license. In addition, no responsibility can be assumed by vendor for any damage or injury
resulting from abnormal use, from any failure to adhere to recommended practices, or from any hazard inherent in the
nature of the product. This product must be stored, handled and used in compliance with current sanitary regulations and
laws. Furthermore the specifications and description given herein cannot be used to void a contract.
Printed on 21/05/01
|