MATERIAL SAFETY DATA SHEET
SECTION 1 鈥? SUPPLIER INFORMATION
Product Name: Star brite Motor Oil SAE Heavy Duty 50 Product Number: 17232, 17200, 17205, 172G55
Supplier鈥檚 Name: Star brite Distributing, Inc. Information Phone: 954-587-6280
4041 S. W. 47 Avenue Emergency Phone: (Chemtrec) 800-424-9300 or 703-527-3887
Ft. Lauderdale, FL 333l4
Date prepared: June 18, 2005
SECTION 11 鈥? HAZARDOUS INGREDIENT INFORMTION
HAZARD RATING RATING
4-Extreme Health 鈥? 1
3-High Flammability 鈥? 1
2-Moderate Reactivity 鈥? 0
1-Slight CAS # - None 鈥? Mixture
0-Insignificant
Toxic and Hazardous Ingredients:
Components CAS# TLV Wt.%
Zinc Alkyldithiophosphate 68649-42-3 Not Determined 0.5 鈥? 1.0
Diphenylamine 122-39-4 10.0 mg/cubic m. 0.01 鈥? 0.1
SECTION III 鈥? PHYSICAL/CHEMICAL CHARACTERISTICS
Chemical Name: Petroleum Hydrocarbon plus Additives
Formula: Not applicable Melting Point (pour point): <-15掳 C (5掳 F)
Form: Liquid Solubility in Water(by weight %): 0%@ 20掳 C
Appearance: Liquid Volatile (by weight %): 0
Odor: Motor oil Evaporation Rate: 0
Color: Amber Vapor Pressure (mm Hg @ 20掳 C): 0
Specific Gravity at 60掳 F: 0.888 Vapor Density (air=1): Not volatile
Boiling Point: >300掳 C (572掳 F) pH (as is): Not applicable
Viscosity SUS @ 100掳 F: 630
SECTION IV 鈥? FIRE AND EXPLOSION DATA
Special Fire Fighting Procedures: Do not use water, except as fog
Unusual Fire & Explosion Hazards: None
Flashpoint (ASTM D92): 216掳 C (421掳 F)
Flammable Limits %: Not applicable
Extinguishing Agents: Dry chemical or water fog or CO2 or foam. Exposed material may be cooled with water.
SECTION V 鈥? REACTIVITY DATA
Stability: Stable
Conditions to avoid: High temperatures
Incompatibility: Strong oxidizers such as hydrogen peroxide, bromine and chromic acid.
Hazardous Polymerization: Will not occur.
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide from burning. Oxides of phosphorous.
Oxides of sulfur.
Product Name: Star brite Motor Oil SAE Heavy Duty 50 Product Number: 17232, 17200, 17205, 172G55
SECTION VI 鈥? HEALTH HAZARD DATA/FIRST AID
EMERGENCY FIRST AID PROCEDURES:
Eyes: Immediately flush with large quantities of water for at least 15 minutes and call a physician.
Skin Contact: Remove excess with cloth or paper. Wash thoroughly with soap and water. Prolonged skin contact may cause
dermatitis or irritation.
Inhalation: Remove victim to fresh air. Call a physician.
If Swallowed: Contact a physician immediately.
SECTION VII 鈥? PRECAUTIONS FOR SAFE HANDLING
Precautions to be taken in Handling and Storage: Do not handle or store at temperatures over 38掳 C or 100掳 F.
Maximum Storage Temperature: 38掳 C (100掳 F)
SECTION VIII 鈥? SPECIAL PROTECTION CONTROL MEASURES
None, unless oil mist exceeds 5mg/m3
Ventilation Type Required (Local, mechanical, special):
None, unless oil mist exceeds 5mg/ m3
Respiratory Protection (Specify Type):
Protective Gloves: Neoprene or nitrate rubber
Eye Protection: Chemical safety goggles with side shields or face shield
Other Protective Equipment: Launder soiled clothes before reuse.
SECTION IX 鈥? HANDLING OF SPILLS AND LEAKS
Procedures for Clean-up: Transfer bulk of material into another container. Absorb with inert material such as earth, sand, or
vermiculite. Sweep up and dispose remaining material in accordance with local, state and federal
regulations.
Waste Disposal: Dispose of in accordance with all applicable federal, state and local regulations.
SECTION X 鈥? TOXICOLOGICAL/ECOLOGICAL INFORMATION
Oil mist mineral 5mg/m m3. (OSHA and NIOSH)
Permissible Concentration:
Chronic Effects of Overexposure: Prolonged skin contact may cause dermatitis or skin irritation
Acute Toxicological Properties: Oral LD50: (rats) >5,000 mg/kg
Dermal LD50: (rabbits) > 2,000 mg/kg
Carcinogenicity: Not carcinogenic under IARC
SECTION XI 鈥? TRANSPORTATION DATA
Call for information
SECTION XII 鈥? REGULATORY INFORMATION
All components listed on TSCA inventory.
Product Name: Star brite Motor Oil SAE Heavy Duty 50 Product Number: 17232, 17200, 17205, 172G55
SECTION XIII 鈥? USER INFORMATION
The information and data herein are believed to be accurate and have been compiled from sources believed to be reliable. It is offered
for your consideration, investigation and verification. Buyer assumes all risk of use, storage and handling of the product in
compliance with applicable Federal, State and Local laws and regulations.
Relating to any party鈥檚 use of or reliance on information and data contained herein regardless of whether it is claimed that the
information and data are inaccurate, incomplete or otherwise misleading, this information relates to the material designated and may
not be valid for such material used in combination with any other materials or in any process.
New and used motor oils have been tested for potential Carcinogenicity in laboratory mice. Only used motor oils were shown to cause
skin cancer when repeatedly applied to mice without any effort to remove the material between applications. Strict compliance to the
occupation control procedures outlined in the data sheet is believed to be adequate protection from such hazards.
|