SYNTHETIC NATURAL GAS COMPRESSOR
NOTE: The information in this publication is the result of careful testing in our laboratories, complemented by selected literature. It does not in any way constitute a guarantee, nor does it serve as a license to operate any patent. Due to widely
PGS-10X
Product Data Sheet
varying conditions of product use, which are beyond our control, it is strongly recommended that the product be tested for suitability. Product typical properties in this publication are current as of May 13, 2002.
Summit PGS-10X synthetic lubricant is a polyglycol-based prod-
uct for use in rotary screw gas compressors requiring the highest
level of resistance to hyrdocarbon dilution. Conditions demand the
unique properties of this fluid. Better wear protection, thermal and
oxidation stability, and reduced sludge and deposit formation
insure enhanced performance when compared to petroleum-based
lubricants.
P.O. Box 131359 鈥? Tyler, CR 2120, Texas 75713, Phone 903.534.8021 鈥? Fax 903.581.4376
When used in rotary compressors with high concentrations of hex-
ane and heavier hydrocarbon vapors, the resistance to thinning out
by hydrocarbon dilution allows PGS-10X to maintain the proper
operating viscosity, extending drain intervals and parts life. Due
to the varying make-up of gases and operating temperatures,
please contact your Summit representative for specific product rec-
ommendations.
As the PGS-10X lubricant are incompatible with petroleum oils,
care should also be taken to make sure the two are not mixed.
June 7, 2006
Physical Properties
PGS-10X
PRODUCT
ISO Grade 10
Viscosity
@ 40掳C, cSt 9.3
@ 100掳C, cSt 2.53
@ 100掳F, SUS 58.6
@ 210掳F, SUS 34.8
Specific Gravity
t/t @ 185掳F .9528
t/t @ 100掳F .9818
t/t @ 60掳F .9925
Viscosity Index 98
Pour Point, 掳F (掳C) -60 (-51)
Density, g/ml, 60掳F .9915
100掳F .9750
Flash Point, 掳F (掳C) 270 (132)
Applications:
鈥? Natural Gas Compressors
鈥? Process Gas Compressors
|