PS-150
MATERIAL SAFETY DATA SHEET
Print date: 30-Aug-2006 Revision Number: 0
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE
COMPANY/UNDERTAKING
Product name: PS-150
Synonyms: No information available
Chemical characterisation: No data is available on the product itself.
Supplier:
Summit Industrial Products
9010 County Road 2120
Tyler, Texas 75707
Phone: (903) 534-8021
Fax: (903) 581-4376
Emergency telephone number CHEMTREC: 1-800-424-9300
2. COMPOSITION/INFORMATION ON INGREDIENTS
3. HAZARDS IDENTIFICATION
Properties affecting health: None.
Principle routes of exposure: Skin.
Skin contact: May cause sensitization by skin contact. Contact causes skin irritation.
Eye contact: May cause slight irritation.
Inhalation: None.
Ingestion: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea
4. FIRST AID MEASURES
General advice: In case of feeling unwell:. Consult a physician.
Skin contact: Wash off immediately with soap and plenty of water.
Inhalation: In the case of inhalation of aerosol/mist consult a physician if necessary. Move to
fresh air.
Eye contact: Flush eye with water for 15 minutes. If symptoms persist, call a physician.
Product name: PS-150 1 of 5
Ingestion: Do not induce vomiting without medical advice. Drink 1 or 2 glasses of water. Consult
a physician if necessary.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media:
Carbon dioxide (CO2), Dry chemical, Water spray mist or foam
Extinguishing media which must not be used for safety reasons:
No information available.
Special protective equipment for firefighters:
In the event of fire, wear self-contained breathing apparatus. Standard procedure for chemical fires.
Specific hazards: Keep product and empty container away from heat and sources of ignition
Unusual hazards: No hazards resulting from the material as supplied
Specific methods: Water mist may be used to cool closed containers.
Flash point: > 400 (掳F)
Method: Cleveland Open Cup
Autoignition temperature: No information available
Flammability Limits in Air:
Lower No information available
Upper No information available
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Contaminated surfaces will be extremely slippery. Use personal protective
equipment. Remove all sources of ignition.
Environmental precautions: Do not flush into surface water or sanitary sewer system.
Methods for cleaning up: Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical
waste container.
7. HANDLING AND STORAGE
Handling
Technical measures/precautions: No special technical protective measures required.
Safe handling advice: Spilling onto the container`s outside will make container
slippery. Avoid contact with skin and eyes. Always replace
cap after use.
Storage
Technical measures/storage conditions: Keep containers dry and tightly closed to avoid moisture
absorption and contamination.
Incompatible products: No special restrictions on storage with other products.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures to reduce exposure:
Ensure adequate ventilation, especially in confined areas.
Personal Protective Equipment
Respiratory protection: In case of mist, spray or aerosol exposure wear suitable personal respiratory
protection and protective suit.
Hand protection: Nitrile rubber.
2 of 5
Skin and body protection: Usual safety precautions while handling the product will provide adequate protection
against this potential effect..
Eye protection: Safety glasses
Hygiene measures: Avoid contact with skin, eyes and clothing..
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid Appearance: Liquid
Color: Clear Odor: Mild Hydrocarbon-like
Specific gravity: <1.0 Boiling point/range > 600 (掳F)
Evaporation rate: Not determined Vapor density: Not determined
Vapor pressure: < 1 mmHg @20 掳C Solubility: Insoluble
10. STABILITY AND REACTIVITY
Stability: Stable under recommended storage conditions.
Polymerization: None under normal processing.
Hazardous decomposition products: Thermal decomposition can lead to release of irritating
gases and vapours.
Materials to avoid: Oxidising agents (strong).
Conditions to avoid: Stable at normal conditions.
11. TOXICOLOGICAL INFORMATION
Acute toxicity No data available
12. ECOLOGICAL INFORMATION
Mobility: No information available.
Bioaccumulative potential: Not determined.
Ecotoxicity effects: No data available.
Aquatic toxicity: No information available.
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused In accordance with local and national regulations.
products:
Contaminated packaging: Empty containers should be taken for local recycling, recovery or waste disposal
14. TRANSPORT INFORMATION
DOT
Proper shipping name: Not Applicable
TDG (Canada)
Proper shipping name: Not Applicable
3 of 5
IMO / IMDG
Proper shipping name: Not Applicable
ICAO
Proper shipping name: Not Applicable
IATA
Proper shipping name: Not Applicable
15. REGULATORY INFORMATION
International Inventories
PICCS: This product does not comply with phil:
TSCA: Listed in TSCA
DSL: All of the components in this product are listed in DSL
ENCS: This product does not comply with JPENCS
CHINA: This product complies with china:
AICS: All the constituents of this material are listed on the Australian Inventory of Chemical Substances (AICS).
KECL: This product does not comply with korea:
EINECS/ELINCS This product complies with EINECS/ELINCS
U.S. Regulations:
Sara (311, 312) hazard class:
Canada
WHMIS hazard class:
Non-controlled
16. OTHER INFORMATION
NFPA Health: 1 Flammability: 1 Instability: 0
HMIS Health: 1 Flammability: 1 Physical Hazard: 0
NFPA symbol:
Reason for revision: Not applicable
Prepared by: Health & Safety
4 of 5
The information and recommendations contained herein are based upon tests believed to be reliable. However, your
company does not guarantee their accuracy or completeness NOR SHALL ANY OF THIS INFORMATION CONSTITUTE
A WARRANTY, WHETHER EXPRESSED OR IMPLIED, AS TO THE SAFETY OF THE GOODS, THE
MERCHANTABILITY OF THE GOODS, OR THE FITNESS OF THE GOODS FOR A PARTICULAR PURPOSE.
Adjustment to conform to actual conditions of usage maybe required. Your company assumes no responsibility for results
obtained or for incidental or consequential damages, including lost profits arising from the use of these data. No warranty
against infringement of any patent, copyright or trademark is made or implied.
5 of 5
|