Syncon鈩? Synthetic
R&O Oil
PAO-Synthetic
Conoco Syncon鈩? Synthetic R&O Oil comprises a line of syn-
thetic PAO-based, multifunctional products intended for indus-
Multipurpose Oils
trial applications. The lighter grades, ISO 32, 46, 68 and 100,
For Compressors,
are typically used in equipment such as rotary-type air com-
pressors, turbines and mild hydraulic applications. The heavier Turbines And Gears
grades, ISO 150, 220, 320 and 460, are typically used in gear-
boxes for which EP characteristics are not required. All grades
can be used in other applications for the lubrication of pump
bearings and electric motors.
Applications
Syncon鈩? Synthetic R&O Oils in the ISO 32 through 100 range
are recommended for use in oil-flooded rotary screw, centrifu-
gal and rotary-vane air compressors operating under severe
conditions of high- and/or cold-temperature startup. The
advantages of the use of these synthetic oils in place of U.S. Technical
mineral oil products include long drain intervals and minimizing Services Hot line:
varnish deposits and sludge where high air outlet temperatures 1-800-255-9556
are expected. Syncon鈩? R&O Oils used in compressor service
are compatible with ammonia, carbon dioxide, helium and U.S. Customer
hydrocarbon gases (for which solubility with process gases is Service:
desired). 1-800-640-1956
Syncon鈩? Synthetic R&O Oils in the ISO 150 through 460 range
(AGMA Grades 4 through 7) are used most often in gearboxes International:
that have the following characteristics: steel-on-steel or +1-832-486-3363
bronze-on-steel gearing with spur, helical, herringbone and
bevel gear geometries. These oils are NOT intended for appli- Asia-Pacific:
cations that require extreme-pressure (鈥淓P鈥?) type additives, tel: (65) 6536-0010
such as spiral-bevel and hypoid or worm gear equipment. fax: (65) 6536-0012
These oils also can be used in circulating oil systems, paper
machine drier bearings, calendar stacks, winders, large E-mail address:
antifriction and journal-bearing applications. conocolubricants@
conocophillips.com
Outstanding Features
鈥? Lubricates effectively over wide temperature range
鈥? Extended drain intervals
鈥? Reduced power consumption
鈥? Reduced maintenance and downtime
鈥? Improved compressor, gearbox efficiency
鈥? Rust, corrosion protection
鈥? Resists oxidation, thermal breakdown: reduced varnish,
deposits, sludge
鈥? Excellent low-temperature fluidity
鈥? Reduced lubricant use, disposal
www.lubes.conoco.com
600 N. Dairy Ashford 鈥? 2W9000 鈥? Houston, TX 77079
Syncon鈩? Synthetic R&O Oil
Typical Properties
ISO Grade 32 46 68 100 150 220 320 460
AGMA Grade 1 2 3 4 5 6 7
Density (lb/gal) 6.93 6.96 6.98 7.01 7.26 7.29 7.31 7.34
Flash Point, ASTM D92
(掳F) 469 500 509 529 475 475 470 465
(掳C) 243 260 265 276 246 246 244 240
Pour Point, ASTM D97
(掳F) -72 -72 -72 -65 -40 -35 -30 -20
(掳C) -58 -58 -58 -54 -40 -37 -34 -29
Viscosity, ASTM D445
cSt @ 40掳C 31 46 68 116 150 220 320 460
cSt @ 100掳C 5.7 7.9 10.2 14.2 17.5 22.8 29.1 37.2
Viscosity Index, ASTM D2270 136 134 145 150 128 127 124 123
Emulsion Characteristics, ASTM D1401
minutes to 40-40-0 10 10 10 10 30 30 30 30
ASTM Rust Test (A&B) Pass Pass Pass Pass Pass Pass Pass Pass
FZG Pass Stage, ASTM D5182 11 12 12 12 12 12 12 12
Four-Ball Wear, mm @ 40 kg, ASTM D4472
1200 rpm, 75掳C 0.54 0.51 0.48 0.45 0.40 0.40 0.40 0.40
Color, ASTM D1500 0.5 0.5 0.5 1.0 2.5 3.5 4.5 5.0
TAN, ASTM D974 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2
Copper Stip Corrosion Test,
ASTM D130 1a 1a 1a 1a 1b 1b 1b 1b
Due to continual product research and development, the information contained herein
is subject to change without notification.
漏 2004 ConocoPhillips Company. Conoco and the Conoco logo are trademarks of ConocoPhillips
Company or one of its subsidiaries.
CSB 4101303
07/04
|