MSDS Code: 775503 Page 1/7
Status: Final Date of Issue: 15-Dec-2004
MATERIAL SAFETY DATA SHEET
Syncon Synthetic R&O 32, 46, 68, 100
1. PRODUCT AND COMPANY IDENTIFICATION
Product Name: Syncon Synthetic R&O 32, 46, 68, 100
Product Code: 7721, 7722, 7723, 7724
Intended Use: Industrial oil
Synonyms: Syncon Synthetic R&O 32
Syncon Synthetic R&O 46
Syncon Synthetic R&O 68
Syncon Synthetic R&O 100
Responsible Party: Conoco Lubricants
A Division of ConocoPhillips
600 N. Dairy Ashford
Houston, Texas
77079-1175
Customer Service: 800-640-1956
Technical Information: 800-255-9556
The intended use of this product is indicated above. If any additional use is known, please contact us at the Technical
Information number listed.
EMERGENCY OVERVIEW
24 Hour Emergency Telephone Numbers:
Spill, Leak, Fire or Accident Call CHEMTREC:
North America: (800) 424-9300
Others: (703) 527-3887 (collect)
California Poison Control System: (800) 356-3219
Health Hazards/Precautionary Measures: Avoid contact with skin and clothing. Wash thoroughly after handling.
Physical Hazards/Precautionary Measures: Keep away from all sources of ignition.
Appearance: Clear and bright
Physical Form: Liquid
Odor: Characteristic petroleum
NFPA 704 Hazard Class: HMIS Hazard Class:
Health: 1 (Slight) Health: 1 (Slight)
Flammability: 1 (Slight) Flammability: 1 (Slight)
Instability: 0 (Least) Physical Hazards: 0 (Least)
MSDS Code: 775503 Page 2/7
Status: Final Date of Issue: 15-Dec-2004
________________________________________________________________________________________________
2. COMPOSITION / INFORMATION ON INGREDIENTS
NON-HAZARDOUS COMPONENTS
Component / CAS No: Percent (%) ACGIH: OSHA: NIOSH: Other:
Additives 2-3 NE NE NE NE
PROPRIETARY
5mg/m3 TWA 5 mg/m3 TWA 2500 mg/m3 IDLH
Synthetic Lubricant Base Oil 97-98 as Oil Mist, if
10 mg/m3 STEL
PROPRIETARY Generated
5 mg/m3 NOHSC
TWA
Note: State, local or other agencies or advisory groups may have established more stringent limits. Consult an industrial hygienist or
similar professional, or your local agencies, for further information.
1%=10,000 PPM.
NE=Not Established
3. HAZARDS IDENTIFICATION
Potential Health Effects:
Eye: Contact may cause mild eye irritation including stinging, watering, and redness.
Skin: Contact may cause mild skin irritation including redness and a burning sensation. No harmful effects from skin absorption are
expected.
Inhalation (Breathing): Expected to have a low degree of toxicity by inhalation.
Ingestion (Swallowing): No harmful effects expected from ingestion.
Signs and Symptoms: Effects of overexposure may include nausea, diarrhea, irritation of the digestive tract, irritation of the nose and
throat. Inhalation of oil mist or vapors at elevated temperatures may cause respiratory irritation.
Cancer: No data available.
Target Organs: No data available for this material.
Developmental: No data available for this material.
Pre-Existing Medical Conditions: None known.
4. FIRST AID MEASURES
Eye: If irritation or redness develops, move victim away from exposure and into fresh air. Flush eyes with clean water. If symptoms
persist, seek medical attention.
Skin: Remove contaminated shoes and clothing and cleanse affected area(s) thoroughly by washing with mild soap and water. If
irritation or redness develops and persists, seek medical attention.
Inhalation (Breathing): If respiratory symptoms develop, move victim away from source of exposure and into fresh air. If symptoms
persist, seek medical attention. If victim is not breathing, clear airway and immediately begin artificial respiration. If breathing difficulties
develop, oxygen should be administered by qualified personnel. Seek immediate medical attention.
Ingestion (Swallowing): First aid is not normally required; however, if swallowed and symptoms develop, seek medical attention.
MSDS Code: 775503 Page 3/7
Status: Final Date of Issue: 15-Dec-2004
________________________________________________________________________________________________
Notes to Physician: High-pressure hydrocarbon injection injuries may produce substantial necrosis of underlying tissue despite an
innocuous appearing external wound. Often these injuries require extensive emergency surgical debridement and all injuries should be
evaluated by a specialist in order to assess the extent of injury.
Acute aspirations of large amounts of oil-laden material may produce a serious aspiration pneumonia. Patients who aspirate these oils
should be followed for the development of long-term sequelae. Inhalation exposure to oil mists below current workplace exposure limits
is unlikely to cause pulmonary abnormalities.
5. FIRE-FIGHTING MEASURES
Flammable Properties:
Flash Point: > 460掳 F / 238掳 C (COC, ASTM D92)
OSHA Flammability Class: Not regulated
NFPA Flammability Class: No data
LEL%: No data
UEL%: No data
Autoignition Temperature: No data
Unusual Fire & Explosion Hazards: This material may burn, but will not ignite readily. Vapors are heavier than air and can accumulate
in low areas. If container is not properly cooled, it can rupture in the heat of a fire.
Extinguishing Media: Dry chemical, carbon dioxide, foam, or water spray is recommended. Water or foam may cause frothing of
materials heated above 212掳F. Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in confined spaces.
Fire Fighting Instructions: For fires beyond the incipient stage, emergency responders in the immediate hazard area should wear
bunker gear. When the potential chemical hazard is unknown, in enclosed or confined spaces, or when explicitly required by DOT, a
self contained breathing apparatus should be worn. In addition, wear other appropriate protective equipment as conditions warrant (see
Section 8).
Isolate immediate hazard area, keep unauthorized personnel out. Stop spill/release if it can be done with minimal risk. Move
undamaged containers from immediate hazard area if it can be done with minimal risk.
Water spray may be useful in minimizing or dispersing vapors and to protect personnel. Cool equipment exposed to fire with water, if it
can be done with minimal risk. Avoid spreading burning liquid with water used for cooling purposes.
6. ACCIDENTAL RELEASE MEASURES
This material may burn, but will not ignite readily. Keep all sources of ignition away from spill/release.
Stay upwind and away from spill/release. Notify persons down wind of the spill/release, isolate immediate hazard area and keep
unauthorized personnel out. Stop spill/release if it can be done with minimal risk. Wear appropriate protective equipment including
respiratory protection as conditions warrant (see Section 8).
Prevent spilled material from entering sewers, storm drains, other unauthorized drainage systems, and natural waterways. Dike far
ahead of spill for later recovery or disposal. Spilled material may be absorbed into an appropriate absorbent material.
Notify fire authorities and appropriate federal, state, and local agencies. Immediate cleanup of any spill is recommended. If spill of any
amount is made into or upon navigable waters, the contiguous zone, or adjoining shorelines, notify the National Response Center
(phone number 800-424-8802).
MSDS Code: 775503 Page 4/7
Status: Final Date of Issue: 15-Dec-2004
________________________________________________________________________________________________
7. HANDLING AND STORAGE
Handling: Do not enter confined spaces such as tanks or pits without following proper entry procedures such as ASTM D-4276 and
29CFR 1910.146. The use of appropriate respiratory protection is advised when concentrations exceed any established exposure limits
(see Sections 2 and 8).
Do not wear contaminated clothing or shoes. Use good personal hygiene practices.
"Empty" containers retain residue and may be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such
containers to heat, flame, sparks, or other sources of ignition. They may explode and cause injury or death. "Empty" drums should be
completely drained, properly bunged, and promptly shipped to the supplier or a drum reconditioner. All containers should be disposed
of in an environmentally safe manner and in accordance with governmental regulations.
High pressure injection of hydrocarbon fuels, hydraulic oils or greases under the skin may have serious consequences even though no
symptoms or injury may be apparent. This can happen accidentally when using high pressure equipment such as high pressure grease
guns, fuel injection apparatus or from pinhole leaks in tubing of high pressure hydraulic oil equipment.
Before working on or in tanks which contain or have contained this material, refer to OSHA regulations, ANSI Z49.1, and other
references pertaining to cleaning, repairing, welding, or other contemplated operations.
Storage: Keep container(s) tightly closed. Use and store this material in cool, dry, well-ventilated areas away from heat and all
sources of ignition. Store only in approved containers. Keep away from any incompatible material (see Section 10). Protect
container(s) against physical damage.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: If current ventilation practices are not adequate to minimize exposure, additional engineering controls may be
required.
Personal Protective Equipment (PPE):
Respiratory: A NIOSH certified air purifying respirator with a Type 95 (R or P) particulate filter may be used under conditions
where airborne concentrations are expected to exceed exposure limits (see Section 2).
Protection provided by air purifying respirators is limited (see manufacturer's respirator selection guide). Use a NIOSH approved
self-contained breathing apparatus (SCBA) or equivalent operated in a pressure demand or other positive pressure mode if there
is potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators
may not provide adequate protection. A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2
requirements must be followed whenever workplace conditions warrant a respirator's use.
Skin: The use of gloves impervious to the specific material handled is advised to prevent skin contact and possible irritation (see
manufacturers literature for information on permeability).
Eye/Face: Approved eye protection to safeguard against potential eye contact, irritation, or injury is recommended. Depending
on conditions of use, a face shield may be necessary.
Other Protective Equipment: A source of clean water should be available in the work area for flushing eyes and skin.
Impervious clothing should be worn as needed.
Suggestions for the use of specific protective materials are based on readily available published data. Users should check with
specific manufacturers to confirm the performance of their products.
9. PHYSICAL AND CHEMICAL PROPERTIES
Note: Unless otherwise stated, values are determined at 20掳C (68掳F) and 760 mm Hg (1 atm).
Appearance: Clear and bright
Physical Form: Liquid
Odor: Characteristic petroleum
Odor Threshold: No data
pH: Not applicable
Vapor Pressure (mm Hg): <1
MSDS Code: 775503 Page 5/7
Status: Final Date of Issue: 15-Dec-2004
________________________________________________________________________________________________
Vapor Density (air=1): >1
Boiling Point: No data
Solubility in Water: Negligible
Partition Coefficient (n-octanol/water): No data
Specific Gravity: 0.82-0.84
Bulk Density: 6.9-7.0
Bulk Density Units lbs/gal
Viscosity cSt @ 100掳C: 5.5-14.0
Viscosity cSt @ 40掳C: 28-110
Percent Volatile: Negligible
Evaporation Rate (nBuAc=1): <1
Flash Point: > 460掳 F / 238掳 C
Test Method: (COC, ASTM D92)
LEL%: No data
UEL%: No data
Autoignition Temperature: No data
10. STABILITY AND REACTIVITY
Stability: Stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
Conditions to Avoid: Extended exposure to high temperatures can cause decomposition.
Materials to Avoid (Incompatible Materials): Avoid contact with strong oxidizing agents, strong bases, strong acids.
Hazardous Decomposition Products: Combustion can yield carbon, nitrogen and sulfur oxides.
Hazardous Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
Chronic Data:
Synthetic Lubricant Base Oil - CAS: PROPRIETARY
Carcinogenicity: The International Agency for Research on Cancer (IARC) has concluded that severely hydrotreated mineral
oils are not carcinogenic. This product meets the OSHA guidance for severe hydrotreating.
Acute Data:
Additives - CAS: PROPRIETARY
Dermal LD50 = No information available
LC50 = No information available
Oral LD50 = No information available
Synthetic Lubricant Base Oil - CAS: PROPRIETARY
Dermal LD50 = No information available
LC50 = No information available
Oral LD50 = No information available
12. ECOLOGICAL INFORMATION
Not evaluated at this time.
MSDS Code: 775503 Page 6/7
Status: Final Date of Issue: 15-Dec-2004
________________________________________________________________________________________________
13. DISPOSAL CONSIDERATIONS
This material under most intended uses would become used oil due to contamination by physical or chemical impurities. RECYCLE
ALL USED OIL. While being recycled, used oil is regulated by 40 CFR 279. Use resulting in chemical or physical change or
contamination may also subject it to regulation as hazardous waste. Under federal regulations, used oil is a solid waste managed under
40 CFR 279. However, in California, used oil is managed as hazardous waste until tested to show it is not hazardous. Consult state
and local regulations regarding the proper handling of used oil. In the case of used oil, the intent to discard it may cause the used oil to
be regulated as hazardous waste.
Contents should be completely used and containers emptied prior to discard. Rinsate may be considered a RCRA hazardous waste
and must be disposed of with care and in compliance with federal, state and local regulations. Large empty containers, such as drums,
should be returned to the distributor or a drum reconditioner. To assure proper disposal of small empty containers, consult with state
and local regulations and disposal authorities.
14. TRANSPORTATION INFORMATION
DOT Proper Shipping Name: Not classified as hazardous
Note: Material is unregulated unless in container of 3500 gallons or more, then provisions of 49 CFR Part 130 apply for land shipment.
IMDG Shipping Description: Not regulated
ICAO/IATA Shipping Description: Not regulated
15. REGULATORY INFORMATION
U.S. Regulations:
EPA SARA 311/312 (Title III Hazard Categories)
Acute Health: No
Chronic Health: No
Fire Hazard: No
Pressure Hazard: No
Reactive Hazard: No
SARA - Section 313 and 40 CFR 372:
This material contains the following chemicals subject to the reporting requirements of SARA 313 and 40 CFR 372:
--None Known--
EPA (CERCLA) Reportable Quantity (in pounds):
--None Known--
CERCLA/SARA - Section 302 Extremely Hazardous Substances and TPQs (in pounds):
This material contains the following chemicals subject to the reporting requirements of SARA 302 and 40 CFR 372:
-- None Known --
California Proposition 65:
Warning: This material contains the following chemicals which are known to the State of Calfornia to cause cancer, birth defects
or other reproductive harm, and are subject to the requirements of California Proposition 65 (CA Health & Safety Code Section
25249.5):
-- None Known --
Carcinogen Identification:
This material has not been identified as a carcinogen by NTP, IARC, or OSHA.
TSCA:
All components are listed on the TSCA inventory.
International Regulations:
MSDS Code: 775503 Page 7/7
Status: Final Date of Issue: 15-Dec-2004
________________________________________________________________________________________________
Canadian Regulations:
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the
MSDS contains all the information required by the CPR.
Domestic Substances List: Listed
WHMIS Classification: Not regulated
16. OTHER INFORMATION
Issue Date: 15-Dec-2004
Previous Issue Date: 30-Apr-2002
Product Code: 7721, 7722, 7723, 7724
Reason for revision: Changed responsible party from Conoco to ConocoPhillips. Other formatting changes
MSDS Code: 775503
Disclaimer of Expressed and implied Warranties:
The information presented in this Material Safety Data Sheet is based on data believed to be accurate as of the date this Material
Safety Data Sheet was prepared. HOWEVER, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR
PURPOSE, OR ANY OTHER WARRANTY IS EXPRESSED OR IS TO BE IMPLIED REGARDING THE ACCURACY OR
COMPLETENESS OF THE INFORMATION PROVIDED ABOVE, THE RESULTS TO BE OBTAINED FROM THE USE OF THIS
INFORMATION OR THE PRODUCT, THE SAFETY OF THIS PRODUCT, OR THE HAZARDS RELATED TO ITS USE. No
responsibility is assumed for any damage or injury resulting from abnormal use or from any failure to adhere to recommended practices.
The information provided above, and the product, are furnished on the condition that the person receiving them shall make their own
determination as to the suitability of the product for their particular purpose and on the condition that they assume the risk of their use.
In addition, no authorization is given nor implied to practice any patented invention without a license.
|