ProCool Premixed Coolant
Silicate Free Long-Life Antifreeze
_____________________________________________________________________________
Applications
BP ProCool Premixed Coolant is a ready to use long-life Premixed Coolant enables longer drain intervals with
coolant based on monoethyleneglycol. In contrast to optimal protection against corrosion, cooling gallery
traditional antifreeze coolants, BP ProCool Premixed blockage, overheating and freezing.
Coolant does not contain Amines, Nitrites, Phosphates,
Silicates or other inorganic inhibitors. BP ProCool Premixed Coolant provides excellent
corrosion protection particularly in engines employing
The special inhibitor package used in BP ProCool light metals.
_____________________________________________________________________________
Main Benefits
- Pre - diluted and ready to use - Suitable for use in mixed fleets
- Long performance life allowing extended drain intervals. - Extended drain capability limits cost and potential harm
to the environment.
- No Calcium deposit build-up from hard water
- Wide operating temperature range for effective engine
cooling in all climates.
_____________________________________________________________________________
Specifications
BP ProCool Premixed Coolant is already diluted in water BP ProCool Premixed Coolant fully meets the
for optimum performance and does not need to be further requirements of the following OEMs:
diluted before use.
- Audi / VW TL 774 D
BP ProCool Premixed Coolant can be used in engines - MB Page 325.3
employing cast iron, aluminum or combinations of these - Ford WSS-M97B44-D
metals. It can also be used in cooling systems using - GM / Opel GM6277M
aluminum or copper components - MAN Type 324 SNF
- Deutz, MWM, Caterpillar, Cummins
For optimum performance, BP ProCool Premixed Coolant - Saab, Mazda, Renault, Scania
should not be mixed with other coolants. It is
recommended that cooling systems should be drained
and flushed before re-filling with BP ProCool Premixed
Coolant
_____________________________________________________________________________
Storage
All packages should be stored under cover. Where the obliteration of drum markings. Products should not be
outside storage is unavoidable drums should be laid stored above 60掳C, exposed to hot sun or freezing
horizontally to avoid the possible ingress of water and conditions.
_____________________________________________________________________________
Health, Safety and Environment
Health, safety and environmental information is provided BP p.l.c. or its subsidiaries will not accept liability if the
for this product in the Materials Safety Data Sheet. This product is used other than in the manner or with the
gives details of potential hazards, precautions and First precautions or for the purpose/s specified. Before the
Aid measures, together with environmental effects and product is used other than as directed, advice should be
disposal of used products. obtained from the local BP office.
_____________________________________________________________________
ProCool Premixed Coolant
Silicate Free Long-Life Antifreeze
_____________________________________________________________________________
Typical Characteristics
_____________________________________________________________________________
Test Methods Units Grade :
_____________________________________________________________________________
Appearance Visual Clear to
slightly hazy
Colour Visual Orange
Fluorescent
Density at 15 掳C ASTM D4052 kg/m鲁 1068
Reserve Alkalinity ASTM D1121 ml 0.1 N HCl 3.0
pH ASTM D1287 - 8.4
Freezing Point ASTM D1177 掳C -38
Boiling Point ASTM D1120 掳C 107
Refractive Index @ 20掳C ASTM D1218 - 1.385
_____________________________________________________________________________
The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.
This Data Sheet and information it contains is considered to be accurate at the The Seller shall not be responsible for any loss or damage resulting from any
date of printing. No warranty or representation, expressed or implied, is made as hazards or risks identified in the data sheet and which are associated with
to the accuracy or completeness of the data and information contained in this petroleum products concerned (provided that this disclaimer shall not affect any
publication. statutory rights of the Buyer of the petroleum products concerned).
It is the User's obligation to evaluate and use products safely and within the
scope advised in the data sheet and to comply with all applicable laws and
regulations. No statement made in this publication shall be construed as a
permission, recommendation or authorisation given or implied to practice any
patented invention without a valid licence.
_____________________________________________________________________________
|