TURBONYCOIL 600
FOR INDUSTRIAL APPLICATIONS
OX-27
O-156
DEF STAN 91-101
MIL-PRF-23699 Class STD SYNTHETIC AVIATION TURBINE OIL
TURBONYCOIL 600 is a lubricating oil with a viscosity of 5 cSt at 100掳C cSt designed for use in gas turbine engines in
military and civil aircraft as well as in stationary industrial applications. It has excellent resistance to foaming and has
superior lubricity. TURBONYCOIL 600 has logged over 2,5 million hours operation in stationary gas turbines since
1986.
TURBONYCOIL 600 is validated for use on the following stationary engines:
General Electric All marks of LM turbines (from LM 500 to LM 6000)
Allison Allison 501K
Rolls-Royce All marks of RB 211 & AVON, Olympus, Tyne, Spey for Industrial & Marine
applications.
Main characteristics
Properties Units Typical values Test methods
- Appearance - clear liquid -
kg/dm3 0.994 ASTM D 4052
- Density at 20掳C
mm2/s
- Kinematic viscosity at ASTM D 445
5.15
100掳C
25.8
40掳C
10000
- 40掳C
掳C
- Flash point, COC 273 ASTM D 92
掳C
- Pour point, COC - 57 ASTM D 97
- Acid number (pH = 11) mg KOH/g 0.27 ASTM D 664
October 2000 鈥? E2
The information contained in this document is the result of careful testing in our laboratories, completed by selected literature. It does not in any way
constitute a guarantee, nor does it serve as a license to operate a patent. Due to widely varying conditions of product use, which are beyond our control, it is
strongly recommended that the product be tested for suitability in the user鈥檚 laboratory
|