Page 1 of 2 May 1, 2001
Material Safety Data Sheet
Product Name: TRANSFILM Anti-Transpirant
MSDS No.: 834-6 Version No.: 003 EPA Registration No.: -None-
1. Basic Information:
PBI/Gordon Corporation
Manufacturer:
1217 West 12th Street
Address:
0 1
Kansas City, MO 64101-1407
City, State Zip:
0
Environmental, Health, & Safety Dept.
Information Contact:
1 0
(816)421-4070
Information Telephone Number: 0
Chemtrec
Emergency Contact:
B
(800)424-9300
Emergency Telephone Number:
10/2/00
Last Update:
X
Chemical State: Liquid Gas Solid
X
Chemical Type: Pure Mixture
2. Ingredients:
SARA
Trade Secret (ND = Not Disclosed) EHS IARC
OSHA ACGIH Other
313
PEL TLV Limits
CAS No. Chemical Name % Range NTP SUB Z
111422 Diethanolamine 1.7 N N N N Y NI 0.46 ppm 3 ppm
3. Hazardous Identification: 5. Fire Fighting Measures:
>220掳F
Flash Point: F.P. Method:
Hazard Catagory:
NI
Lower Explosive Limit:
X Acute X Chronic Fire Pressure Reactive
NI
Upper Explosive Limit:
Hazardous Identification Information:
Fire Extinguishing Media:
Water spray, dry chemical, CO2 or foam.
4. First Aid Measures: Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and full protective clothing.
Route(s) of Entry:
Unusual Fire and Explosion:
Contact, inhalation and ingestion.
Burning may produce irritating or poisonous gases.
Health Hazards (Acute and Chronic):
6. Accidental Release Measures:
EYES: Contact may cause irritation and burning.
SKIN: Contact may cause irritation and reddening.
Steps to be Taken in Case Material is Released or Spilled:
See Section 8 for Personal Protective Equipment. Contain and collect
INHALATION: May irritate respiratory tract.
the spilled material with inert absorbent, and place in containers for
proper disposal.
INGESTION: May irritate gastrointestinal tract.
7. Handling and Storage:
Signs and Symptoms:
NI
Medical Conditions Generally Aggravated by Exposure: Precautions to be Taken:
Avoid contact with skin. Keep from children and pets. Avoid
Existing dermatitis may be aggravated by overexposure.
cross-contamination of food and feed. Do not reuse container.
Emergency First Aid Procedure:
EYES: Flush with large amounts of clean water for 10-15 minutes, Other Precautions:
NI
holding lids open. If irritation persists, seek medical attention.
8. Exposure Controls/Personal Protection:
SKIN: Remove contaminated clothing. Bathe and shampoo with soap
and water to remove chemicals from skin and hair. If irritation persists,
seek medical attention. Launder contaminated clothing separately prior
Ventilation Requirements:
to reuse.
Local exhaust.
INHALATION: Remove victim to fresh air. If irritation persists, seek Personal Protective Equipment:
medical attention. EYE PROTECTION: Safety glasses or goggles.
INGESTION: Call a physician or Poison Control Center. PROTECTIVE CLOTHING: Long sleeves and pants; chemical-resistant
gloves and shoes.
Other Health Warnings:
NI
RESPIRATORY PROTECTION: If exposure limits may be exceeded,
Page 2 of 2 May 1, 2001
Material Safety Data Sheet
Product Name: TRANSFILM Anti-Transpirant
MSDS No.: 834-6 Version No.: 003 EPA Registration No.: -None-
Exposure Controls/Personal Protection (Continued) Regulatory Information (Continued)
wear a respirator with an organic-vapor removing cartridge with a prefilter which contains 100 pounds of Diethanolamine
approved for pesticides (MSHA/NIOSH approval number prefix TC-23C),
or a NIOSH approved respirator with any R, P or HE filter. SARA TITLE III:
SECTION 302 EXTREMELY HAZARDOUS SUBSTANCES: None
9. Physical and Chemical Properties: SECTION 311/312 HAZARD CATEGORIES: Immediate Health
Hazard, Delayed Health Hazard
SECTION 313 TOXIC CHEMICALS: Diethanolamine, CAS# 111-42-2
Boiling Point: 220掳F Melting Point: NI
Evaporation Rate (Butyl Acetate = 1) : <1
RCRA STATUS: If discarded in its purchased form, this product would
Vapor Pressure (mm Hg.): <17@20掳C not be a hazardous waste either by listing or by characteristic. However,
under RCRA it is the responsibility of the product user to determine at
Vapor Density (Air = 1): >1
the time of disposal, whether a material containing the product or
Specific Gravity (H20 = 1): 0.98429 derived from the product should be classified as a hazardous waste. (40
CFR 261.20-24)
Solubility in Water: Infinite.
16. Other Information:
Appearance and Odor: Milky white suspension; banana odor
Other Information:
REASON FOR ISSUE: To revise MSDS to the ANSI Z400.1-1998
pH: 9.0-10.0
format
Freezing point <35掳F
Density: 8.2 pounds/gallon
NOTE: NI means not indicated.
10. Stability and Reactivity:
The information and statements in this Material Safety Data Sheet are
believed to accurately reflect the scientific evidence used in making the
Stability: hazard determination, but is not to be construed as a warranty or
Stable. representation for which we assume legal responsibiltiy. Additional
information may be necessary or desirable depending on particular,
Incompatibility (Materials to Avoid):
exceptional or variable conditions or circumstances of use or storage or
Do not mix with acidic materials as this may ruin the product.
becuase of locally applicable laws or government regulations.
Decomposition/By-Products: Therefore, you should use this information only as a supplement to other
information available to you and must make independent determinations
None known.
of the suitability of the information for your particular circumstances or
Hazardous Polymerization: conditions and of the completeness of the information available from all
Will not occur. sources to assure both the proper use of the material described herein
and the safety and health of employees.
11. Toxicological Information:
No toxicological data available.
12. Ecological Information:
13. Disposal Considerations:
Cover and label the containers. Waste product, absorbent and waste
water should be disposed of according to local, state and Federal
regulations. Contact the local EPA for assistance.
14. Transport Information:
The following guidelines apply for domestic ground transport. If shipping
by air or ocean, please contact our Transportation Dept.
Freight Class: Adhesive, Adjuvants, Spreaders or Stickers, Liquid -
NMFC #4610
In our current available sizes, this product does not qualify as a
Hazardous Material.
15. Regulatory Information:
OSHA STATUS: This product is hazardous under the criteria of the
Federal OSHA Hazard Communication Standard 29 CFR 1910.1200.
TSCA STATUS: All components of this product that are required to be
on the TSCA inventory are listed on the inventory.
CERCLA REPORTABLE QUANTITY: 5882 pounds of the formulation
|