Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
Acrylates Copolymer
1. Product Identification 8. First Aid Measures
Product Name: Acrylates Copolymer Eyes: Immediately rinse eyes with running water for 15 minutes. If
INCI Name: Acrylates Copolymer irritation develops, get medical attention.
Chem. N.: No data Skin: Wash affected areas with soap and water. Remove and launder
CAS Number: No data contaminated clothing before reuse. If irritation develops, get medical
EINECS Number: No data attention.
Inhalation: Move to fresh air. Aid in breathing, if necessary, and get
2. Physical and Chemical Properties immediate medical attention.
Ingestion: If swallowed, dilute with water and immediately induce
Melting Point: No data vomiting. Never give fluids or induce vomiting if the victim is unconscious
Boiling Point: No data or having convulsions. Get immediate medical attention.
Refractive Index: No data
9. Fire Fighting Measures
Evaporation Rate: No data
Specific Gravity: N/A Flash Point: Not available
Solubility in Water: Dispersible Auto-ignition Temp: Not available
pH Value: 5-7 @ 350 G/L, 23 Deg. C Extinguishing Media: Use water fog, foam, CO2, or dry chemical
Appearance & Odor: White powder and nearly odorless Fire Fighting Procedures: Firefighters should be equipped with self-
contained breathing apparatus and turn out gear.
3. Stability and Reactivity 10. Toxicological Information
Chemical Stability: Stable
Acute Oral LD50: >2000 MG/KG
Incompatibility: None known
Dermal and Eye Irritation Test: Non-irritating
Hazardous Decomposition: None known
Carcinogenicity: No data
Hazardous Polymerization: Will not occur
Mutagenicity: No data
4. Handling and Storage 11. Disposal Considerations
Take precautionary measures against static discharges. Avoid dust
Incinerate or bury in a licensed facility. Do not discharge into waterways
formation. Protect from direct sunlight. Store at moderate temperatures, in
or sewer systems without proper authority. Dispose of in a licensed facility.
tight containers.
Recommend crushing or other means to prevent unauthorized reuse.
5. Accidental Release Measures
Spills should be contained, solidified and placed in suitable containers
for disposal in a licensed facility. This material is not regulated by RCRA or
CERCLA. Wear appropriate respiratory protection and protective clothing
and provide adequate ventilation during clean-up.
6. Exposure Controls & Personal Protection
Respiratory Protection: If dusts are generated, wear an approved
dust respirator.
Protective Clothing: Gloves, coveralls, apron, boots as necessary to
prevent contact, and goggles or side shield safety glasses.
Other Protective Measures: Use local exhaust to control dusts.
Unusual Hazards: Ensure adequate ventilation to minimize dusting. When
transferring this product make sure equipment is grounded to prevent
electrostatic buildup and potential explosion of dust/air mixture.
7. Hazards Identification
General: Contact with eyes and skin may result in irritation. Ingestion
of the solid may result in gastric disturbances.
Inhalation: No data
Eye Contact: No data
Skin Contact: No data
Ingestion: No data
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
|