Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
Peg 150 Distearate
Last Revised: 7/25/05
1. Product Identification 7. Hazards Identification
Product Name: Peg 150 Distearate General: No data
INCI Name: Peg 150 Distearate Inhalation: Negligible unless heated to produce vapors. Vapors or
Chem. N.: No data finely misted materials may irritate the mucous membranes and cause
Ingredient(s) & CAS Number(s): Peg 150 Distearate, 9005-08-07 irritation, dizziness, and nausea. Remove to fresh air.
Ingredient(s) & EINECS Number(s): No data Eye Contact: May cause irritation. Irrigate eye with water for at least
15 to 20 minutes. Seek medical attention if symptoms persist.
Skin Contact: Prolonged or repeated contact is not likely to cause
2. Physical and Chemical Properties
significant skin irritation. Material is sometimes encountered at elevated
Melting Point: No data temperatures. Thermal burns are possible.
Boiling Point: 760mm Hg: >200c Ingestion: No hazards anticipated from ingestion incidental in
Evaporation Rate: <1 industrial exposure.
Specific Gravity: (H2O=1) 1.075
Solubility in Water: 0-10%
8. First Aid Measures
pH Value: No data
Appearance & Odor: White flake with a bland odor Eyes: Irrigate eyes with a heavy stream of water for at least 15 to 20
minutes. Seek medical attention if symptoms persist.
3. Stability and Reactivity Skin: Wash exposed areas of the body with soap and water.
Inhalation: No adverse effects anticipated by this route of exposure
Chemical Stability: Stable incidental to proper industrial handling.
Incompatibility: Strong oxidizing agents Ingestion: No adverse effects anticipated by this route of exposure
Hazardous Decomposition: Combustion procedures carbon incidental to proper industrial handling.
monoxide, carbon dioxide along with thick smoke. Physician鈥檚 Note: No data
Hazardous Polymerization: Will not occur
9. Fire Fighting Measures
4. Handling and Storage
Flash Point: >400C (COC)
Store in closed container between 50F and 120F. Keep away from
Auto-ignition Temp: No data
oxidizing agents, excessive heat, and ignition sources. Store and use in well-
Extinguishing Media: Dry chemical, foam, halon, CO2 water spray
ventilated areas. Do not store or use near heat, spark, or flame; store out of
(fog). Water stream may splash burning liquid and spread fire.
sun. Do not puncture, drag, or slide this container. Drum is not a pressure
Fire Fighting Procedures: Use water spray to cool drums exposed to
vessel; never use pressure to empty.
fire.
Fire and Explosion Hazards: Firefighters should use self-contained
5. Accidental Release Measures breathing apparatus to avoid exposure to smoke and vapor.
Remove sources of ignition, contain spill to smallest area possible. Stop
10. Toxicological Information
leak if possible. Pick-up small spills with absorbent materials such as paper
towels, 鈥渙il dry鈥?, sand or dirt. Recover large spills for salvage or disposal. Acute Oral LD50: No data
Wash hard surfaces with safety solvent or detergent to remove remaining oil Dermal and Eye Irritation Test: No data
film. Greasy nature will result in a slippery surface. Carcinogenicity: No data
Mutagenicity: No data
6. Exposure Controls & Personal Protection
11. Disposal Considerations
Respiratory Protection: If vapors or mists are generated, wear a
NIOSH approved organic vapor/mist respirator. Waste may be disposed of by licensed waste disposal company.
Eye Protection: Safety glasses, goggles or a face shield recommended Contaminated absorbent material may be disposed of in an approved landfill.
to protect eyes from mists or splashing. Follow local, state, and federal disposal regulations.
Protective Clothing: PVC coated gloves recommended to prevent
skin contact.
Engineering Controls: No data
Other Protective Measures: Employees must practice good personal
hygiene, washing exposed areas of skin several times daily and laundering
contaminated clothing before re-use.
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
|