Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
Polyquaternium-44
Last Revised: 6/30/06
1. Product Identification 9. Fire Fighting Measures
Product Name: Polyquaternium-44 Extinguishing Media: Water, carbon dioxide (CO2), foam and dry
Ingredient(s) & CAS Number(s): Copolymer of: 1-methyl-3-vinyl- extinguishing media
imidazolium-methylsulfate and 1-vinyl-2-pyrrolidone (30:70) 150599-70-5 Fire Fighting Procedures: In case of fire, wear a self-contained
breathing apparatus.
Fire and Explosion Hazards: Dispose of fire debris and
2. Physical and Chemical Properties
contaminated extinguishing water in accordance with local regulations.
Density: 1.1 g/cm3 (approx.)
Boiling Point: (1013 mbar) 100 C 10. Toxicological Information
Vapor Pressure: (23 C) 27 mbar, (50 C) 121 mbar (approx.)
Viscosity: (25 C) 2500 mPa.s (approx.) Acute Oral LD50: > 5000 mg/kg (rat)
Solubility in Water: Fully miscible Dermal LD50: > 2000 mg/kg (rat)
pH Value: Neutral Mutagenicity: No mutagenic effect
Appearance & Odor: Clear yellowish liquid, faint specific odor
11. Disposal Considerations
3. Stability and Reactivity
Must be disposed of by special means, e.g. suitable incineration, in
Hazardous Decomposition: None provided product is correctly accordance with local regulations.
processed.
4. Handling and Storage
Protection against fire and explosion: The usual precautions for the
handling of chemicals must be observed. Keep tightly closed in a dry and
cool place. Containers should preferably be of plastic (can corrode metals).
5. Accidental Release Measures
Do not let product enter drains. Large spillages should be dammed-off
and pumped into containers; soak up remainder with absorbent material and
dispose of in accordance with local regulations. Small spillages can be
swilled away with water. Waste water must be disposed of correctly.
6. Exposure Controls & Personal Protection
Eye Protection: Safety glasses with side-shields
Protective Clothing: Protective gloves
Other Protective Measures: The usual precautions for the handling
of chemicals must be observed.
7. Hazards Identification
General: Critical hazards to man and the environment: Toxic to aquatic
organisms may cause long-term adverse effects in the aquatic environment.
8. First Aid Measures
Eyes: Wash affected eyes for at least 15 minutes under running water
with eyelids held open.
Skin: Wash thoroughly with soap and water
Inhalation: Keep patient calm, remove to fresh air
Ingestion: Rinse mouth and then drink plenty of water.
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
|