Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
Stearic Acid
Last Revised: 10/12/05
General: No Data
1. Product Identification
Inhalation: This material is a dust or may produce dust. Breathing small
Product Name: Stearic Acid amounts of this material is not likely to be harmful.
Generic ID: Fatty Acid Eye Contact: Dust can cause eye irritation. Symptoms include stinging,
Ingredient(s) CAS Number(s) % (by weight) tearing, redness, and swelling of eyes.
Palmitic Acid 57-10-3 48.0- 52.0 Skin Contact: May cause skin irritation. Symptoms may include
Stearic Acid 57-11-4 44.0- 48.0 redness, burning, and swelling of skin.
Myristic Acid 544-63-8 1.0- 5.0 Ingestion: Swallowing this material is not likely to be harmful.
Unknown material 1.0- 5.0 Exposure Guidelines: No Data
2 8. First Aid Measures
Melting Point: No Data Eyes: If symptoms develop, move individual away from exposure and
Boiling Point: > 425.0 F (218.3 C) @ 760 mmHg into fresh air. Flush eyes gently with water while holding eyelids apart. If
Freezing Point: 130.1 131.9 F (54.5 鈥? 55.5 C) symptoms persist or there is any visual difficulty, seek medical attention.
Evaporation Rate: Not Applicable Skin: Remove contaminated clothing. Wash exposed area with soap and
Specific Gravity: .829 - .850 @ 77.00 F water. If symptoms persist, seek medical attention. Launder clothing before
Solubility in Water: No Data reuse.
pH Value: Not Applicable Inhalation: First aid is not applicable.
Appearance: White, Solid, Flakes or Powder Ingestion: Seek medical attention. If individual is drowsy or
Odor: No Data unconscious, do not give anything by mouth; place individual on the left side
3. Stability and Reactivity with the head down. Contact a physician, medical facility, or poison control
center for advice about whether to induce vomiting. If possible, do not leave
Chemical Stability: Stable individual unattended.
Incompatibility: Strong alkalis, strong oxidizing agents. Physician鈥檚 Note: Preexisting disorders of the following organs (or
Hazardous Decomposition: May Form: carbon dioxide and carbon organ systems) may be aggravated by exposure to this material: (for
monoxide example, asthma-like conditions).
Hazardous Polymerization: Will not occur.
9. Fire Fighting Measures
4. Handling and Storage
Flash Point: > 200.0 F (93.3 C) PMCC
Containers of this material may be hazardous when emptied. Since
Auto-ignition Temp: No Data
emptied containers retain product residues (vapor, liquids, and/or solid), all
Extinguishing Media: Regular foam, water fog, carbon dioxide, dry
hazard precautions given in the data sheet must be followed.
chemical.
Fire Fighting Procedures: Water or foam may cause frothing which
5. Accidental Release Measures can be violent and possibly endanger the life of the firefighter. Wear a self-
contained breathing apparatus with a full facepiece operated in the positive
Small Spill: Sweep up material for disposal or recovery. pressure demand mode with appropriate turn-out gear and chemical resistant
Large Spill: Shovel material into containers. Thoroughly sweep area of personal protective equipment.
spill to clean up any residual material. Fire and Explosion Hazards: No Data
6. Exposure Controls & Personal Protection 10. Toxicological Information
Respiratory Protection: Not required under normal conditions of use. No data
Eye Protection: Chemical splash goggles in compliance with OSHA
regulations are advised; however, OSHA regulations also permit other type
11. Disposal Considerations
safety glasses. Consult your safety representative.
Protective Clothing: Wear resistant gloves (consult your safety Deposit in a landfill in accordance with local, state and federal
equipment supplier). Wear normal work clothing covering arms and legs. regulations.
Engineering Controls: Not required under normal conditions of use.
Other Protective Measures: No Data
7. Hazards Identification
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
Stearic Acid
Last Revised: 10/12/05
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
|