Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003
Material Safety Data Sheet
Polyquaternium-10
Last Revised: 6/30/06
1. Product Identification 8. First Aid Measures
Product Name: Polyquaternium-10 Eyes: Immediately irrigate with eyewash solution or clean water, holding the eyelids
Chem. Family: Quaternary Cellulosic Derivative apart, for at least 10 minutes. Obtain medical attention.
Skin: Wash skin with soap and water. If symptoms develop, obtain medical attention.
Inhalation: Remove to fresh air. Get medical attention if irritation persists.
2. Physical and Chemical Properties Ingestion: Treat symptomatically and supportively. Get medical attention. Do not
attempt to give anything by mouth to an unconscious person.
Bulk Density: 4-8 lb/gal
Volatiles: < 7%
Volatile Organic Compounds: < 10 g/liter 9. Fire Fighting Measures
Solubility in Water: Soluble
Hazardous Combustion Products: Carbon monoxide, carbon dioxide, unknown
pH in 1% Solution: 5-7
hydrocarbons
Appearance & Odor: Tan powder
Lower Explosion Limit (%): 30.0 g/m3
Minimum Ignition Energy: 1000-10000 mJ
3. Stability and Reactivity
Kst Class: 1= weak explosion
Kst Value: 36.1 bar.m/s
Chemical Stability: Stable under normal temperature and pressure
Stability Detail: Product contains low level of organic volatiles which may be emittedExtinguishing Media: CO2, dry chemical, foam, water fog
or
released in application processes involving the use of heat. Vent all ovens and process vessels Fighting Procedures: Firefighters should be equipped with self-contained
Fire
breathing apparatus to protect against potentially toxic and irritating fumes.
to the outside atmosphere.
Fire and Explosion Hazards: Product is finely divided combustible powder and as
such constitutes a potential fire hazard. Keep workplace dust levels below the stipulated
4. Handling and Storage
exposure limits. Product contains low level of organic volatiles which may be emitted at
Store in a cool, dry area away from heat, sparks or fire. Mechanical handling of the elevated temperatures.
powder on inadequately grounded equipment can result in static electrical discharges. All
handling equipment must be organic volatiles which could accumulate in the unvented 10. Toxicological Information
headspace of drums or bulk storage vessels. Open drums in well-ventilated area. Avoid
General: Unlikely to cause harmful effects under normal conditions of handling and
breathing. Sensitive to static electricity.
use.
Routes of Entry: Eye contact, skin contact, inhalation and ingestion
5. Accidental Release Measures Carcinogenicity: There is no evidence that this product poses a carcinogenic risk
under normal conditions of handling and use.
Normal precautions for 鈥渘uisance dust鈥? should be observed. Avoid prolonged inhalation
of dust. Sweep up or vacuum up and place in suitable container for disposal.
11. Disposal Considerations
6. Exposure Controls & Personal Protection Disposal should be in accordance with local, state or national legislation. Empty contai
Respiratory Protection: None required under normal handling conditions. Use amay contain product residue.
NIOSH approved dust mask if dust levels are irritating.
Eye Protection: Wear safety glasses with side shields. Protect against dust and
particulates.
Protective Clothing: The use of chemically resistant gloves is recommended.
Uniforms, coveralls, or a lab coat should be worn. Remove contaminated clothing and launder
before reuse.
Engineering Controls: Local
Other Protective Measures: Wash exposed areas with soap and water.
7. Hazards Identification
General: Possible physical irritant from dust particles. Potential for dust explosion.
Inhalation: This product can produce a nuisance dust which should be maintained below
a time weighted average of 10 mg/m3. Dust is irritant to the respiratory tract.
Eye Contact: Particulates may scratch eye surfaces and cause mechanical irritation.
Skin Contact: Repeated or prolonged skin contact may result in mild irritation.
Ingestion: Ingestion may cause irritation of the gastrointestinal tract.
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.
|