Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: bpilabs_com---polyquaternium-4.asp
 Personalformulator.com
97 S. Red Willow Rd.
Evanston, WY 82930
US 1-800-426-2457 Ext. 1003

Material Safety Data Sheet
Polyquaternium-4
Last Revised: 6/30/06
Skin: Wash skin with soap and water. If symptoms develop, obtain medical attention.
1. Product Identification
Inhalation: Remove to fresh air. Get medical attention if irritation persists.
Product Name: Polyquaternium-4 Ingestion: Treat symptomatically and supportively. Get medical attention. Do not
Chem. Family: Quaternary Cellulosic Derivative attempt to give anything by mouth to an unconscious person.

2. Physical and Chemical Properties 9. Fire Fighting Measures
Bulk Density: 4 lb/gal Hazardous Combustion Products: Carbon monoxide, carbon dioxide, unknown
Volatiles: < 10% hydrocarbons
Volatile Organic Compounds: < 1 g/liter Lower Explosion Limit (%): 60.0 g/m3
Solubility in Water: Miscible Minimum Ignition Energy: 100-300 mJ
Specific Gravity: (water=1) 0.48 Kst Class: 1= weak explosion
pH in 1% Solution: 6.3-7.3 Kst Value: 43 bar.m/s
Appearance & Odor: Yellow Solid, Negligible odor Extinguishing Media: CO2, dry chemical, foam, water fog
Fire Fighting Procedures: Firefighters should be equipped with self-contained
breathing apparatus to protect against potentially toxic and irritating fumes.
3. Stability and Reactivity
Fire and Explosion Hazards: Product is finely divided combustible powder and as
Chemical Stability: Stable under normal temperature and pressure such constitutes a potential fire hazard. Keep workplace dust levels below the stipulated
exposure limits. Prohibit smoking and open flames. Avoid sparks or other sources of static
electricity.
4. Handling and Storage
Store in a cool, dry place. Mechanical handling of the powder on inadequately
10. Toxicological Information
grounded equipment can result in static electrical discharges. Sensitive to
static electricity.
General: Unlikely to cause harmful effects under normal conditions of handling and
use.
5. Accidental Release Measures Routes of Entry: Eye contact, skin contact, inhalation and ingestion
Carcinogenicity: There is no evidence that this product poses a carcinogenic risk
Normal precautions for 鈥渘uisance dust鈥? should be observed. Avoid prolonged inhalation
under normal conditions of handling and use.
of dust. Sweep up or vacuum up and place in suitable container for disposal.

11. Disposal Considerations
6. Exposure Controls & Personal Protection
Disposal should be in accordance with local, state or national legislation. Empty contai
Respiratory Protection: None required under normal handling conditions. Use amay contain product residue.
NIOSH approved dust mask if dust levels are irritating.
Eye Protection: Wear safety glasses with side shields. Protect against dust and
particulates.
Protective Clothing: The use of chemically resistant gloves is recommended.
Uniforms, coveralls, or a lab coat should be worn. Remove contaminated clothing and launder
before reuse.
Engineering Controls: Local
Other Protective Measures: Wash exposed areas with soap and water.

7. Hazards Identification
General: Possible physical irritant from dust particles. Potential for dust explosion.
Inhalation: This product can produce a nuisance dust which should be maintained below
a time weighted average of 10 mg/m3. Dust is irritant to the respiratory tract.
Eye Contact: Particulates may scratch eye surfaces and cause mechanical irritation.
Skin Contact: Repeated or prolonged skin contact may result in mild irritation.
Ingestion: Ingestion may cause irritation of the gastrointestinal tract. Low
oral toxicity.

8. First Aid Measures
Eyes: Immediately irrigate with eyewash solution or clean water, holding the eyelids
apart, for at least 10 minutes. Obtain medical attention.
Important Notice: The information presented herein is based on experimental data submitted by the manufacturers
of the raw materials and is considered scientifically correct; however, no warrant or representation, express or implied, is
made as to the accuracy or suitability of this information for application to the purchaser鈥檚 intended purpose or for
consequences of its use and we assume no responsibility for any loss, damage or expense, direct or consequential, arising
out of its use. Use these materials only as directed. If you have any questions regarding the proper interpretation of this
sheet or the meanings of any terms used, we strongly urge you to speak with your physician. For further information
concerning product safety and proper use, call the number listed on the front of the MSDS.

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
bpilabs_com---matrixyl_doc.asp N/A
bpilabs_com---methylparaben.asp N/A
bpilabs_com---myristyl_myristate.asp 3234-85-3
bpilabs_com---natural_surfactant.asp 68187-30-4
bpilabs_com---natural_vitamin_e.asp N/A
bpilabs_com---oleth-10.asp 9004-98-2
bpilabs_com---peg-7_glyceryl_cocoate.asp 68201-46-7
bpilabs_com---peg_150_distearate.asp 9005-08-0
bpilabs_com---pemulen_tr1.asp N/A
bpilabs_com---peppermint_oil.asp 68917-18-0
bpilabs_com---phenoxyethanol.asp 122-99-6
bpilabs_com---polyethylene_bead3167.asp 9002-88-4
bpilabs_com---polyquaternium-10.asp N/A
bpilabs_com---polyquaternium-4.asp N/A
bpilabs_com---polyquaternium-44.asp 150599-70-5
bpilabs_com---polysorbate_20.asp 9005-64-5 10191-41-0
bpilabs_com---ppg-2_myristyl_ether_propionate.asp 74775-06-7
bpilabs_com---propylene_glycol_stearate_se.asp N/A
bpilabs_com---propylparaben.asp 94-13-3
bpilabs_com---raspberry_fragrance.asp N/A
bpilabs_com---retinyl_palmitate.asp 79-81-2
bpilabs_com---retistar.asp 134-03-2 10191-41-0
bpilabs_com---sea_salt.asp 7647-14-5
bpilabs_com---sepigel.asp 64742-47-8
bpilabs_com---skin_tightener_st.asp N/A
bpilabs_com---sodium_hyaluronate1.asp 9067-32-7
bpilabs_com---sodium_laureth_sulfate.asp N/A
bpilabs_com---steareth-2.asp 9005-00-9
bpilabs_com---stearic_acid.asp 57-10-3 57-11-4 544-63-8
bpilabs_com---sunflower_oil.asp N/A
bpilabs_com---ultez_10.asp N/A
bpilabs_com---wheat_complex.asp 94350-06-8
bpilabs_com---wheat_germ_oil.asp 8006-95-9
bpilabs_com---xanthan_gum.asp 11138-66-2
buckeyef_com---msds_1_percent_lo_temp.asp 7732-18-5 57-55-6 107-41-5
buckeyef_com---msds_3x6_lo_temp.asp 7732-18-5 57-55-6 107-41-5
buckeyef_com---msds_co2.asp 124-38-9
buckeyef_com---msds_standard.asp 144-55-8 7631-86-9 301-10-0 63148-57-2
buckeyef_com---msds_virtual_foam.asp 7732-18-5 57-50-1
cctinc_ca---acid_wash__msds_2004.asp 7647-01-0
cctinc_ca---acrylic_water_base_sealer_msds_2004.asp 299-28-2 009036-19-5 07664-41-7
cctinc_ca---acrylithin_msds_2004.asp 1330-20-7
cctinc_ca---alcohol_base_dyes_msds_2004.asp 64-17-5 67-56-1 78-93-3 141-78-6
cctinc_ca---blended_colors_-_blues_greens.asp 147-14-8 1309-37-1 13463-67-7
cctinc_ca---blended_colors_-_greys_blacks_msds.asp 1309-37-1
cctinc_ca---blended_colors_-_reds_and_browns_msds_2004.asp 1309-37-1
cctinc_ca---blended_colors_-_white_bc-36_msds_2004.asp 13463-67-7
cctinc_ca---blended_colors_-_yellows_and_oranges_msds.asp 1309-37-1
cctinc_ca---broomcoat_msds_2004.asp 65997-15-1 1317-65-3 14808-60-7
cctinc_ca---color-flow_3500_black_msds_2005.asp 001333-86-4 1336-21-6 67-63-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC