Material Safety Data Sheet
Safety Data Sheet according to the Dir. 2001/58/EEC
VPS HYDRO Soft Normal PUTTY
Revision date: 17 May 2004 Print date: 07 June 2004
1. IDENTIFICATION OF THE PREPARATION AND OF THE COMPANY
1.1 Identification of the preparation:
Trade name: VPS HYDRO SOFT NORMAL PUTTY
Trade code: 900-1448
1.2 Utilization of the substance or of the preparation:
Addition silicone for high precision impressions.
1.3 Identification of the company:
Supplier: Henry Schein Inc, Melville NY 11747 USA
Henry Schein UK Holdings Ltd, Gillingham, ME8 0SB
Tel UK 01634 878750 鈥? Chemtrec Int. 001 703 527 3887
Emergency telephone: 0039 0425 597611
2. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components in accordance with EEC directive 67/548 and successive amendments or
components with a recognised exposure limit: None
3. IDENTIFICATION OF HAZARDS
PREPARATION NOT CLASSIFIED DANGEROUS
No specific hazards are encountered under normal use of the product. Contact with the eyes may
cause slight irritation and reddening of the conjunctiva.
4. FIRST AID MEASURES
4.1 Contact with skin: The specific indications will not cause of irritation.
4.2 Contact with eyes: Wash immediately with water for at least 10 minutes.
4.3 Swallowing: If swallowed in a small quantity the product is harmless, otherwise consult a
doctor.
4.4 Inhalation: Ventilate the premises.
5. FIRE-FIGHTING MEASURES
5.1 Recommended extinguishers: water, CO2, foam, or chemical powders, depending on the
materials involved in the fire.
5.2 Extinguishers not to be used: none in particular.
5.3 Risks arising from combustion: avoid inhaling the fumes.
5.4 Protective equipment: use protection for the respiratory tract.
6. ACCIDENTAL RELEASE MEASURES
6.1 Measures for personal safety: none in particular
6.2 Environmental measures: limit leakage with earth or sand. If the product has escaped into a
water course, into the drainage system, or has contaminated the ground or vegetation, notify the
competent authorities.
6.3 Cleaning methods: recover the product for re-use if possible, or for elimination. The product
may, where appropriate, be absorbed by inert material. After the product has been recovered, rinse
the area and materials involved with water.
7. HANDLING AND STORAGE
7.1 Handling precautions: refer to point 8 below. Do not eat or drink while working.
7.2 Incompatible materials: none in particular. Also see point 10 below.
7.3 Storage conditions: keep in a cool, dry place at a temperature of 5掳C to 27掳C (41 - 80掳F).
7.4 Technical measures: adequately ventilated premises.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
8.1 Precautionary measures: ensure adequate ventilation of the premises where the product is
stored and/or handled.
8.2 Respiratory protection: not needed for normal use
8.3 Protection for hands: not needed for normal use
8.4 Eye protection: not needed for normal use. Always apply proper working practices.
8.5 Protection for skin: no special precaution required for normal use
8.6 Exposure limit(s) (ACGIH): none
9. PHYSICAL AND CHEMICAL PROPERTIES
9.1 Appearance and colour: Bicomponent paste, of which one part (base) is coloured (Blue).
9.2 Odour: odourless
Material Safety Data Sheet
9.3 Relative density: 1.61 g/cc
9.4 Solubility in water: insoluble
10. STABILITY AND REACTIVITY
10.1 Conditions to avoid: stable under normal conditions.
10.2 Substances to avoid: the "base" component may produce hydrogen in contact with alkaline
and acid substances.
10.3 Hazardous decomposition products: none
11. TOXICOLOGICAL INFORMATION
The product itself has no cytotoxic effects on the L929 cellular line.
12. ECOLOGICAL INFORMATION
Adopt sound working practices, ensuring that the product is not released into the environment.
13. DISPOSAL CONSIDERATIONS
Recover if possible. In so doing, comply with the local and national regulations currently in force.
14. TRANSPORT INFORMATION
Not classified as dangerous under transport regulations.
15. REGULATORY INFORMATION
D.Lgs.65/03 (Classification, Packing and Labelling of the preparation dangerous): The preparation is
not considered hazardous under D.Lgs.65/03.
Medical Device CE marked according to the Directive 93/42/EEC.
16. OTHER INFORMATION
The information contained herein is based on our state of knowledge on the date specified above. It
refers solely to the product indicated and constitutes no guarantee of particular quality. It is the duty
of the user to ensure that this information is appropriate and complete with respect to the specific use
intended. This MSDS cancels and replaces any preceding release.
REVISION DATE DESCRIPTION EMISSION APPROBATION
1 01/04/04 Premier emission R&S RSGQA
|