FLEX F1000
WATER ACTIVATED
POLYURETHANE RESIN
SPECTON CONSTRUCTION PRODUCTS LTD.
T E C H N I C A L D ATA
SPECTON FLEX F1000 RECOMMENDED FOR FEATURES / BENEFITS
Sealing leaking cracks and joints in Safe 鈥?
A single component, hydrophobic
concrete structures such as: Tested and classified by UL in
polyurethane injection resin designed
accordance with Standard ANSI/NSF 61
鈥? Parking Garages
for sealing leaks through cracks, rock
for contact with potable water.
鈥? Potable Water Tanks
pockets, expansion and control joints 100% solids and harmless to the
鈥? Dams and Powerhouses environment.
in concrete structures. This resin and
鈥? Tunnels (Subways and Highways)
accelerator mixture reacts when it
鈥? Elevators and Service Pits
comes in contact with water and forms
鈥? Canals
a micro cellular closed cell gasket
鈥? Swimming Pools
with excellent adhesion and long-term
ANSI / NSF 61
鈥? Underground Utilities and
flexibility. The cured hydrophobic Drinking water system components
Municipal Services 4P97
compression gasket that is formed in
鈥? Waste Water Treatment Plants
the joint or crack remains stable and Adjustable Accelerator Dosage 鈥?
鈥? Processing Plants
Controlling the accelerator dosage
is highly resistant to degradation
鈥? Industrial, Commercial and on site allows the applicator to react
resulting from repeated freeze/thaw
Residential Poured Concrete to a variety of changing conditions.
and wet/dry cycles. Foundations.
Stable 鈥?
Cured resin withstands thermal
expansion/contraction, wet/dry cycles,
COMPOSITION / CHARACTERISTICS freeze/thaw cycles and crack
movement without degradation.
SPECTON FLEX F1000 鈥? Uncured Resin
Chemically Resistant 鈥?
Appearance Yellow Liquid
Essentially unaffected by corrosive
Viscosity at 25藲C ASTMD-4878-98 600 cps 卤 100 environments. Excellent resistance to
fungi, gases and chemicals typically
Density at 25藲C ASTMD-789-98 1.065
found in soil and standard commercial
Flashpoint ASTMD-1310-86 >150藲C structures. Resistant against biological
attack.
SPECTON FLEX F1000 鈥? Uncured Accelerator Proven Track Record 鈥?
Flex F1000 has been successfully
Appearance Dark Grey Clear Liquid
used for over 14 years in North America
Viscosity at 25藲C ASTMD-4878-98 10 cps 卤 3 and remains the product of choice
Density at 25藲C ASTMD-789-98 0.995 by engineers, owners and specialty
concrete restoration contractors.
Flashpoint ASTMD-1310-86 >150藲C
Applicator Friendly 鈥?
No unpleasant odors and Flex F1000 is
SPECTON FLEX F1000 鈥? Cured easily injected using single component
Hardness ASTMD-2240-00 37 Shore A injection equipment.
Tensile Strength ASTMD-1623-78 1.1 MPa
Elongation >250%
Toxicity Non Toxic
FLEX F1000
REACTION TIME VS TEMPERATURE
WATER ACTIVATED 400
POLYURETHANE RESIN Reaction Velocity Flex F1000
350
MIXING AND HANDLING 300 Induction 20藲C Gel 20藲C
1 Wear rubber gloves and safety
TIME IN SECONDS
250 Induction 15藲C Gel 15藲C
glasses and/or a safety shield when
mixing or handling the products. 200
Familiarize yourself with the
MSDS guidelines and information. 150
Mix and install the materials in
100
a well ventilated area.
2 Using clean and dry mixing 50
containers and measuring cups,
add between 2% to 10% Accelerator 0
to the Resin depending on the 2 4 6 8 10
desired reaction time. Refer to the % ACCELERATOR
Reaction Time vs Temperature graph
as a guideline to assist with dosages
SAFETY PRECAUTIONS PACKAGING
of accelerator.
鈥? Avoid contact with skin or eyes. Specton FLEX F1000 Resin 鈥? 20 Kg PAILS
It is always recommended to perform
Accelerator 鈥? 2 Kg BOTTLES
a small site test to determine the 鈥? Familiarize yourself with
reaction time of the resin and the MSDS and follow safety
precautions indicated. All recommendations, data and statements contained within this
accelerator mixture. document are based on tests we believe to be correct, but are not to be
construed as a warranty either expressed or implied. The user shall rely
鈥? Mix and apply the materials
3 Mix the resin and accelerator on his or her own tests and information to determine the suitability of
the product for the application and assumes all risk and liability resulting
in a well ventilated area. from his or her use of the product. The seller鈥檚 and manufacturer鈥檚 sole
thoroughly with an electric drill and responsibility shall be to replace that portion of product that is proven
鈥? In addition to conventional to be defective. Neither the seller nor the manufacturer shall be liable
mixing paddle. to the buyer or any third person for any injury, loss or damage directly
construction safety equipment, or indirectly resulting from the use or inability to use the product.
4 Install or inject the resin mixture wear rubber gloves and
using a single component pump. a safety visor.
5 Clean the injection pump every few PLEASE CONTACT US
hours with Specton Pump Flush or
FOR ADVICE AND
when the injection work is completed.
PRODUCT INFORMATION
APPLICATION Specton Technical Representatives
are available to assist you with specific
Contact a Specton Technical
guidelines for your project and product
Representative for specific application
requirements. We can be reached at:
guidelines for your injection project.
SPECTON CONSTRUCTION PRODUCTS LTD.
Refer to SPECTON鈥檚 proven
12 WALLACE STREET, ACTON, ONTARIO
SPEC-IT (SPECton Injection Technique)
CANADA L7J 2V6
installation guidelines for crack injection,
expansion joints and manhole repair. TEL: 519-853-9118
1-866-SPECTON (773-2866)
STORAGE FAX: 519-853-1732
Specton polyurethane resins and
EMAIL: info@specton.com
accelerators are moisture sensitive
WEB: www.specton.com
and should be stored in dry conditions
at temperatures below 24藲C (75藲F).
Do not allow the polyurethane resins
and accelerators to freeze or to be
stored in temperatures below 0藲C (32藲F).
SPECTON CONSTRUCTION PRODUCTS LTD.
|