HYDRO-SEAL SEALMASTER
SPECTON CONSTRUCTION PRODUCTS LTD.
SINGLE COMPONENT GUN GRADE
HYDROPHILIC SEALANT AND ADHESIVE
T E C H N I C A L D ATA
HYDRO-SEAL SEALMASTER RECOMMENDED FOR FEATURES / BENEFITS
Sealing concrete construction joints in: Active Protection 鈥?
Hydro-Seal SEALMASTER is a high
SEALMASTER swells more than 200% its
鈥? Parking Garages
performance gun grade hydrophilic
original size to form an effective and
鈥? Processing Plants
elastomer sealant that has the capability
chemically resistant compression seal.
鈥? Industrial, Commercial and
to swell to more than 200% it鈥檚 original
Fast, Simple and Easy Installation 鈥?
Residential Poured Concrete
size when it comes in contact with water.
SEALMASTER is packaged in
Foundations
SEALMASTER鈥檚 hydrophilic expansive conventional caulking cartridges for
鈥? Water Reservoirs
ease of application in a variety of
properties compensate for concrete
鈥? Cast-in-Place and Segmental Tunnels construction conditions.
shrinkage and thermal movement in
鈥? Sewage Treatment Plants
Stable 鈥?
construction joints. SEALMASTER is used
鈥? Hydro and Water Retention Dams retains its original swelling
SEALMASTER
to create an impenetrable waterstop in
properties after repeated expansion
鈥? Precast Box Culverts and
concrete construction joints. In addition
and contraction.
Utility Chambers
to having excellent adhesion to a variety
鈥? Swimming Pools Chemically Resistant 鈥?
of substrates such as metal, rock and
SEALMASTER is manufactured from
鈥? Pipe Penetrations
concrete, SEALMASTER is an excellent chemically resistant ingredients and is
鈥? Sheet Pile Joints
resistant to micro-bacterial attack.
adhesive for bonding Hydro-Seal
鈥? Adhesive for Hydro-Seal
hydrophilic rubber strips. On its own, Hydrophilic Rubber Strips Advanced Design 鈥?
is specially formulated to
SEALMASTER
SEALMASTER is a versatile waterstop for
ensure a slow expansion rate, so as not
difficult access areas, solving construction
to damage fresh concrete duing curing.
problems or for rough uneven concrete and
rock surfaces where preformed PVC type
Hydro-Seal SEALMASTER
waterstop installations are not practical.
310mL Cartridge
PHYSICAL AND PERFORMANCE CHARACTERISTICS
HYDRO-SEAL SEALMASTER 鈥? High Performance Hydrophilic Waterstop
Form Elastomeric Swellable Mastic
Colour Gray
Packaging 310mL Cartridges 25 Cartridges per Box
Tack Free Time 1 鈥? 2 Hours @ 23藲C
Elongation ASTM-D412 >500%
Volumetric Expansion Rate >200%
Shore A Hardness 35
Service Temperature Range -20藲C to 50藲C
HYDRO-SEAL SEALMASTER SINGLE COMPONENT
GUN GRADE HYDROPHILIC SEALANT AND ADHESIVE
INSTALLATION INFORMATION COVERAGE
The joint surface must be clean and Bead Diameter Coverage per Tube
dry. SEALMASTER can be applied to damp
3mm 20 鈥? 25 metres
surfaces, however running and
6mm 8 鈥? 10 metres
standing water should be removed
prior to application. Loose material, dirt 8mm 4 鈥? 5 metres
and dust should be removed by wire 10mm approx. 3 metres
brushing.
Cut off the tip on the cartridge thread PIPE PENETRATON PRECAST H-TYPE STEEL
and screw on the nozzle. Cut the nozzle
to required size and apply like a
conventional sealant continuously onto Sealmaster
Sealmaster
the substrate, ensuring that there are
no breaks in the bead. The sealant
bead should be not less than 15mm for
concrete sections with a thickness of
Sealmaster
between 100 and 300mm, and a
minimum of 20mm for sections of
between 300 and 500mm. All recommendations, data and statements contained within this
SAFETY PRECAUTIONS
Note: The minimum thickness of document are based on tests we believe to be correct, but are not to be
construed as a warranty either expressed or implied. The user shall rely
on his or her own tests and information to determine the suitability of
鈥? Install materials
concrete around SEALMASTER should be the product for the application and assumes all risk and liability resulting
from his or her use of the product. The seller鈥檚 and manufacturer鈥檚 sole
in a well ventilated area.
at least 50mm on each side and at least responsibility shall be to replace that portion of product that is proven
to be defective. Neither the seller nor the manufacturer shall be liable
100mm from the top. 鈥? Keep away from open flame. to the buyer or any third person for any injury, loss or damage directly
or indirectly resulting from the use or inability to use the product.
鈥? Familiarize yourself with
Allow SEALMASTER to cure for a
the MSDS and follow safety
minimum 8 hours before concrete
precautions indicated.
pours. During casting, avoid dropping
PLEASE CONTACT US
鈥? Wear conventional construction
concrete onto the profile from a level
safety equipment during FOR ADVICE AND
higher than 500mm. If this condition is
installation.
PRODUCT INFORMATION
unavoidable, protect the profile with a
鈥? Read the information printed on
100mm thick layer of fresh concrete or Specton Technical Representatives
the caulking cartridge.
mortar. are available to assist you with specific
guidelines for your project and product
SEALMASTER is suitable for use in most
requirements. We can be reached at:
weather conditions, but heavy rain or
prolonged immersion will cause SPECTON CONSTRUCTION PRODUCTS LTD.
premature swelling. Should this occur, 12 WALLACE STREET, ACTON, ONTARIO
it will be necessary to allow it to dry CANADA L7J 2V6
out, or be dried with a hot air gun
TEL: 519-853-9118
before concrete pouring takes place.
1-866-SPECTON (773-2866)
FAX: 519-853-1732
STORAGE
EMAIL: info@specton.com
SEALMASTER should be stored in a cool
and dry place. WEB: www.specton.com
APPLICATION
Contact a Specton Technical
Representative for specific installation
methods for your project. SPECTON CONSTRUCTION PRODUCTS LTD.
|