RAPID H100
WATER ACTIVATED
POLYURETHANE RESIN
SPECTON CONSTRUCTION PRODUCTS LTD.
T E C H N I C A L D ATA
SPECTON RAPID H100 RECOMMENDED FOR FEATURES / BENEFITS
A single component hydrophobic Water Cut Off material for gushing Safe 鈥?
leaks through cracks in concrete 100% solids system is harmless to
polyurethane injection resin designed for
structures, rock faults and gravel the environment.
water cut-off and the sealing of gushing
layers typically found in:
water leaks of high pressure and volume Adjustable Accelerator Dosage 鈥?
鈥? Sheet Pile and Shoring Projects
from voids, openings, cracks or joints in Controlling the accelerator dosage
allows the applicator to react to a
鈥? Segmental and Cut and Cover
and around concrete structures, rock or
variety of changing site conditions.
Tunnels
sandy soils. This resin reacts quickly with
鈥? Precast Culverts and Manholes
water to form a semi-rigid foam that is Stable 鈥?
resistant to most organic solvents, mild Cured hydrophobic resin withstands
鈥? Pipe Penetrations
thermal expansion/contraction,
acids, alkali, microorganisms and 鈥? Dams and Powerhouses
wet/dry cycles, freeze/thaw cycles.
bacterial growth. The cured hydrophobic 鈥? Waste Water Treatment Plants
foam is tough and quickly develops good Chemically Resistant 鈥?
鈥? Mine Shafts
compressive strengths in addition to being Resists attack from mild acids, most
鈥? Industrial and Commercial
organic solvents, biological attack,
resistant to degradation resulting from
Poured Concrete Foundations.
gases and chemicals typically found
repeated freeze/ thaw and wet/dry cycles.
in soil and standard commercial
Rapid H100 works well with Resin Pads,
structures.
un-oiled Oakum and open cell backer rods
Proven Track Record 鈥?
as a packing to stop heavy leaks in joints
Rapid H100 has been successfully used
and open cracks.
for over 14 years in North America.
COMPOSITION / CHARACTERISTICS Applicator Friendly 鈥?
No harsh solvent odor, and
SPECTON RAPID H100 鈥? Uncured Resin Rapid H100 is easily injected using
single component injection equipment.
Appearance Brown Liquid
Viscosity at 25藲C ASTMD-4878-98 140 cps 卤 20
Density at 25藲C ASTMD-789-98 1.105
Flashpoint ASTMD-1310-86 >150藲C
SPECTON RAPID H100 鈥? Uncured Accelerator
Appearance Yellow Clear Liquid
Viscosity at 25藲C ASTMD-4878-98 10 cps 卤 3
Density at 25藲C ASTMD-789-98 0.995
Flashpoint ASTMD-1310-86 >150藲C
SPECTON RAPID H100 鈥? Cured
Hardness ASTMD-4219-93a 12
Tensile Strength ASTMD-1623-78 2 MPa
Toxicity Non Toxic
RAPID H100
REACTION TIME VS TEMPERATURE
WATER ACTIVATED 400
POLYURETHANE RESIN Rapid H100 Reaction Time f(%Acc, temp)
350
Induction 25藲C Gel 25藲C
MIXING AND HANDLING 300 Induction 15藲C Gel 15藲C
1 Wear rubber gloves and safety Induction 5藲C Gel 5藲C
TIME IN SECONDS
250
glasses and/or a safety shield when
mixing or handling the products. 200
Familiarize yourself with the MSDS
guidelines and information. 150
Mix and install the materials in
100
a well ventilated area.
2 Using clean and dry mixing 50
containers and measuring cups,
add between 2% to 10% Accelerator 0
to the Resin depending on the 2 3 4 5 6 7 8 9 10
desired reaction time. Refer to % ACCELERATOR
the Reaction Time vs Temperature
graph as a guideline to assist with
SAFETY PRECAUTIONS PACKAGING
accelerator dosages. It is always
鈥? Avoid contact with skin or eyes. Specton RAPIDH100 Resin 鈥? 20 Kg PAILS
recommended to perform a small site
Accelerator 鈥? 2 Kg BOTTLES
test to determine the reaction time of 鈥? Familiarize yourself with
the resin and accelerator mixture. the MSDS and follow safety
precautions indicated. All recommendations, data and statements contained within this
3 Mix the resin and accelerator document are based on tests we believe to be correct, but are not to be
construed as a warranty either expressed or implied. The user shall rely
鈥? Mix and apply the materials on his or her own tests and information to determine the suitability of
thoroughly with an electric drill and the product for the application and assumes all risk and liability resulting
in a well ventilated area. from his or her use of the product. The seller鈥檚 and manufacturer鈥檚 sole
mixing paddle. responsibility shall be to replace that portion of product that is proven
鈥? In addition to conventional to be defective. Neither the seller nor the manufacturer shall be liable
to the buyer or any third person for any injury, loss or damage directly
4 Install or inject the resin mixture construction safety equipment, or indirectly resulting from the use or inability to use the product.
using a single component pump. wear rubber gloves and
a safety visor.
5 Clean the injection pump every few
hours with Specton Pump Flush or
PLEASE CONTACT US
when the injection work is completed.
FOR ADVICE AND
PRODUCT INFORMATION
APPLICATION
Specton Technical Representatives
Contact a Specton Technical
are available to assist you with specific
Representative for specific application
guidelines for your project and product
guidelines for your injection project.
requirements. We can be reached at:
Refer to SPECTON鈥檚 proven
SPECTON CONSTRUCTION PRODUCTS LTD.
SPEC-IT (SPECton Injection Technique)
12 WALLACE STREET, ACTON, ONTARIO
installation guidelines for crack injection,
CANADA L7J 2V6
expansion joints and manhole repair.
TEL: 519-853-9118
STORAGE 1-866-SPECTON (773-2866)
Specton polyurethane resins and FAX: 519-853-1732
accelerators are moisture sensitive
EMAIL: info@specton.com
and should be stored in their unopened
WEB: www.specton.com
original packages in dry conditions at
temperatures below 24藲C (75藲F).
Do not allow the polyurethane resins
and accelerators to freeze or to be
stored in temperatures below 0藲C (32藲F).
SPECTON CONSTRUCTION PRODUCTS LTD.
|