Material Safety Data Sheet
RT1000 鈥? Rubber Toughened Cyanoacrylate Adhesive
庐
TELEPHONE 715-832-4557
1. Product Identification
Product Name RT1000
Product Rubber Toughened Cyanoacrylate Adhesive
2. Composition
Ingredients CAS# WT%
Ethyl Cyanoacrylate 7085-85-0 90-99
Poly Methyl Methacrylate 9011-14-7 1-10
Proprietary Additive Proprietary 4-6
Hydroquinone 12-31-9 .1-1.0
Ingredients that Have Exposure Limits
Exposure Limits (TWA) ACGIH OSHA Other
Ingredients (TLV) (PEL)
Ethyl Cyanoacrylate 0.2 ppmTWA None None
Hydroqinone 2mg/m(TWA 2mg/m3TWA 2mg/m3TWA
4mg/m3STEL
Exposure Limits (STEL)
Ethyl Cyanoacrylate (4ppm) (4ppm)
(18mg/m3) (16mg/m3)
3. Hazards Identification
Toxicity Skin contact may cause burns. Bonds skin rapidly.
Skin and eye irritant.
Estimated oral LD more than 5,000mg/kg.
Estimated dermal LD 50 more than 2,000mg/kg.
Primary Routes of Entry None known
Symptoms of Exposure Vapor is irritating to the mucous membranes when above TLV. Prolonged and
repeated overexposure to vapors may produce allergic reactions with asthma like
symptoms in sensitive individuals.
Existing Conditions Aggravated by Exposure None Known
Target Organs and Other Health Effects
Carcinogens
NTP IARC OSHA
Methyl Cyanoacrylate Allergen, irritant, respiratory No No No
Poly (methyl Methacrylate) Irritant No N/A No
Hydroquinone ACGIH animal carcinogen, No N/A No
blood, bone marrow, central
nervous system, eye, immune
system, irritant, liver, skin,
mutagen, thyroid.
4. First Aid Measures and Personal Protection
Note: See supplemental page or emergency procedures and additional First Aid information.
Ingestion Ingestion is not likely.
Inhalation Remove to fresh air. If symptoms persist, obtain medical attention.
Skin contact Soak in warm water.
Eye contact Flush with water.
Personnel protection
Eye Chemical safety glasses or goggles.
Skin Polyethylene gloves and/or aprons. DO NOT use cotton/cloth type gloves.
Ventilation Positive draft exhaust ventilation should be provided to maintain vapor concentration levels below TLV.
5. Fire Fighting Measures
Flash Point 160-200掳F (Method TCC)
Extinguishing Agents Carbon dioxide, foam, dry chemical.
Special Fire Fighting
Procedures Not available.
Hazardous Products Formed by
Fire or Thermal Decomp Irritating organic vapors.
Unusual Fire or Explosion Hazards None
5. Fire Fighting Measures (cont.)
Explosive Limits
(% by volume in air) Lower Not available
(% by volume in air) Upper Not available
6. Accidental Release Measures
If a spill or leak occurs flood area with water to polymerize (cure) the material. Soak up with an inert absorbent.
7. Handling and Storage
Storage Store below 72掳F
Handling Avoid contact with skin and eyes. Avoid breathing vapors.
8. Exposure Controls, Personal Protection
Note: See supplemental page for emergency and additional First Aid information.
(see number 2. for exposure limit information)
Eyes Chemical safety glasses or goggles.
Skin Polyethylene gloves and aprons. DO NOT use cotton or cloth materials.
Ventilation Positive down draft exhaust ventilation should be provided to maintain vapor concentration below TVL.
9. Physical and Chemical Properties
Clear liquid
Appearance
Sharp, irritating
Odor
More than 300掳F
Boiling Point
Polymerized
Solubility in Water
1.05 @ 75掳F
Specific Gravity
Less than .2 mm @ 75掳F
Vapor Pressure
3
Vapor Density
87.1%; 914.55 g/l (EPA Method 24)
VOC
10. Stability and Reactivity
Stability Stable
Will not occur
Hazardous Polymerization
Incompatibility Polymerized by contact with water, alcohol, amines, alkalies.
Conditions to Avoid Not available
Hazardous Decomposition Products (Non-thermal); None
11. Toxicological Information
Refer to number 3.
12. Ecological Information
No data available.
13. Disposal Considerations
Recommended methods of disposal Polymerize as indicated in number 6. Incinerate following EPA and local regulations.
EPA Hazardous waste number: NH - Not a RCRA Hazardous Waste Material.
14. Transportation Information
DOT (49CFR 172) Domestic Ground Transport
Proper Shipping Name Unrestricted (not more than 450 liters); Combustible liquids, n.o.s.(Cyanoacrylates) (more than 450 liters)
Hazard Class or Division Unrestricted (not more than 450 liters)
Identification Number None (not more than one pint)
NA 1993 (more than 450 liters)
Marine Pollutant None
IATA
Proper Shipping Name Unrestricted (not more than 1 pint)
Aviation regulated liquid, n.o.s., (Cyanoacrylate) (more than 1 pint)
Class or Division Unrestricted (not more than 1 pint)
Class 9 (more than 1 pint)
UN or ID Number None (not more than 1 pint)
UN 3334 (more than 1 pint)
15. Regulatory Information
CA Proposition 65: No Prop 65 chemicals known to be present
We believe the information contained herein is current and accurate as of this date of this Material Safety Data Sheet. Since the use of this information and these opinions and the
conditions of use of this product are not under the control of ADHESIVE R&D庐, Inc. or it鈥檚 agents or distributors, it is the user鈥檚 obligation to determine the conditions of safe use of
this product. The buyer should conduct its own tests of this product before use to determine proper preparation technique and suitability for proposed application. ADHESIVE R&D庐,
Inc. warrants that the product conforms with ADHESIVE R&D庐鈥檚 written specifications, and is free from defects and disclaims all other warranties, expressed or implied and is
not responsible for loss claim of damages resulting from the use of it鈥檚 products. Rev 01/03
|