AM-124
Material Safety Data Sheet
Issue Date: 8/19/05 Revision Date: 8/25/05 Supersedes: 8/25/05
Product Identification:
Manufacturer鈥檚 Name: Applied Membranes, Inc.
Address: 2325 Cousteau Ct., Vista, CA 92081-8346
Phone No.: (760) 727-3711
Applied Membranes, Inc. Name: AM-124
Trade Name: Iron Deposit Remover TFC/CA Type RO
Membranes
Chemical Formula: Proprietary
Emergency Phone Number: For Chemical Emergency, Spill Leak Fire Exposure or
Accident - Call CHEMTREC Day or Night
DOMESTIC NORTH AMERICA 800-424-9300
INTERNATIONAL, CALL 703-527-3887 (collect calls
accepted)
Composition/ Information on Ingredients
CAS no. Conc% OSHA PEL ACGIH TLV
trade secret 100% 5.000 mg/m3 5.000 mg/m3
(respirable dust) (respirable dust)
Hazardous Ingredients:
None
First Aid Measures:
Effects of Exposure
Ingestion: Recognized as safe.
Eye Contact: An irritant characteristic of organic acids.
Skin Contact: Mild Irritant
Inhalation: Dust may cause mild symptoms of respiratory irritation.
Emergency First Aid
Ingestion: Recognized as safe.
Eye Contact: Wash eyes with plenty of water. Get medical attention.
Skin Contact: Wash affected area with water. Launder clothing before reuse.
Inhalation: Remove person to fresh air.
Page 1 of 3
Applied Membranes, Inc. assumes no liability for results obtained or damages incurred through the improper application of the above
information and data.
Revised 10/18/2005
AM-124 MSDS Information (continued)
Fire Fighting Measures:
Flash Point/Method Ignition temperature (Powder 1000-1020 C)
Extinguishing Media: Water.
Special Fire Fighting Procedures: None.
Unusual Fire and Explosion Hazards: None. At optimum air concentration Bureau
of Mines Relative Explosion Rating = Weak
Upper Explosive Limit (UEL): 8 grams/cu. ft.
Lower Explosive Limit (LEL): 65 grams/cu. ft.
Accidental Release Measures:
Spill or Leak Procedures:
Neutralize and flush with water or sweep and shovel.
Waste Disposal:
Dispose of waste material according to federal, state and local regulations.
Handling and Storage:
Precautions To Be Taken In Handling And Storing:
None Normally Required
Other Precautions:
Aqueous solutions can, if in contact with reactive metal (iron, zinc, or aluminum), form
hydrogen which may form explosive mixtures.
Exposure Control/ Personal Protection:
Respiratory Protection: Approved nuisance mask.
Ventilation: Local exhaust sufficient to control dust.
Protective Clothing: None.
Gloves: Standard work gloves.
Eye Protection: Safety glasses.
Other Protective Equipment: None
Physical and Chemical Properties:
Appearance and Odor: White Odorless powder or granules.
Physical State: Solid.
pH (1% soln.): 3
Solubility in Water: >50%
Boiling Point: Not applicable
Specific Gravity: 1.665
Vapor Pressure (mm. HG.): Not Applicable
Vapor Density (Air=1): Not Applicable
Page 2 of 3
Applied Membranes, Inc. assumes no liability for results obtained or damages incurred through the improper application of the above
information and data.
Revised 10/18/2005
AM-124 MSDS Information (continued)
Percent Volatile By Volume (%): Not Applicable
Stability and Reactivity:
Stability: Stable
Incompatibility: Usual incompatibilities of organic acids.
Hazardous Decomposition Products: None known.
Hazardous Polymerization: Will not occur.
Conditions to Avoid: None known.
Toxicological Information:
Oral/Parenteral: Rat LD50 = 11,700 mg/kg.
Dermal (Acute): Rabbit = 500 mg/24 hr. MOD.
Eye: 750 mg/24 hr. SEV.
Inhalation: Not Available
Chronic: Long term oral overexposure may cause damage to tooth
enamel.
Page 3 of 3
Applied Membranes, Inc. assumes no liability for results obtained or damages incurred through the improper application of the above
information and data.
Revised 10/18/2005
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP