Research Sample Material Safety Data Sheet
Hazard Communication Standard (29CFR 1910.1200)
庐 BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462
(610)941-0430
Sample for Experimental Use ONLY
WARNING!
Product Name: Caspase AMC QuantiPak
The properties of this material have not been fully
investigated. Use due caution in handling and use
of this product. Its chemical, physical and
toxicological properties have not been fully
investigated. Exercise due care.
Catalog Number: AK-005
Do not take internally. Avoid breathing dust. Wear
suitable protective clothing and gloves. If any
irritation occurs, get immediate medical attention.
For further information contact BIOMOL
International L.P.
(610)941-0430
This kit contains the following components:
1mg Ac-DEVD-AMC
1mg Ac-YVAD-AMC
1mg Ac-IETD-AMC
0.1mg Ac-DEVD-CHO
0.1mg Ac-YVAD-CHO
0.1mg AC-IETD-CHO
Please see attached MSDS information for each individual component
Research Sample Material Safety Data Sheet
Hazard Communication Standard (29CFR 1910.1200)
庐 BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462
(610)941-0430
Sample for Experimental Use ONLY
WARNING!
Product Name: DEVD-AMC
The properties of this material have not been fully
investigated. Use due caution in handling and use
of this product. Its chemical, physical and
Catalog Number: P-411 toxicological properties have not been fully
investigated. Exercise due care.
Do not take internally. Avoid breathing dust. Wear
suitable protective clothing and gloves. If any
irritation occurs, get immediate medical attention.
For further information contact BIOMOL
International L.P..
(610)941-0430
Avoid contact with eyes and skin Flammable
Avoid inhalation Health hazard
Avoid proximity of operations to ignition Special hazard _______________
sources
Toxic
Corrosive
Wear lab coat, glasses/goggles and gloves as
Decomposition products hazardous minimum protection
Dust irritant Wear a NIOSH-approved respirator as
minimum protection
Eye contact hazard
Do not release spilled or wasted material to the environment. This material should be handled in a
restricted manner until its degree of risk has been adequately assessed. BIOMOL International L.P.
recommends that waste(s) be transported to a federal- or state-licensed incinerator. State hazardous waste
regulations may vary, check with local authorities before determining final method of disposal.
The information contained herein is the best that is available. However, BIOMOL International L.P..
cannot guarantee completeness or accuracy and further disclaims all liability for its handling or use.
Printed: January 7, 2004 Created: January 7, 2004
Research Sample Material Safety Data Sheet
Hazard Communication Standard (29CFR 1910.1200)
庐 BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462
(610)941-0430
Sample for Experimental Use ONLY
WARNING!
Product Name: YVAD-AMC
The properties of this material have not been fully
investigated. Use due caution in handling and use
of this product. Its chemical, physical and
Catalog Number: P-401 toxicological properties have not been fully
investigated. Exercise due care.
Do not take internally. Avoid breathing dust. Wear
suitable protective clothing and gloves. If any
irritation occurs, get immediate medical attention.
For further information contact BIOMOL
International L.P.
(610)941-0430
Avoid contact with eyes and skin Flammable
Avoid inhalation Health hazard
Avoid proximity of operations to ignition Special hazard _______________
sources
Toxic
Corrosive
Wear lab coat, glasses/goggles and gloves as
Decomposition products hazardous minimum protection
Dust irritant Wear a NIOSH-approved respirator as
minimum protection
Eye contact hazard
Do not release spilled or wasted material to the environment. This material should be handled in a
restricted manner until its degree of risk has been adequately assessed. BIOMOL International L.P.
recommends that waste(s) be transported to a federal- or state-licensed incinerator. State hazardous waste
regulations may vary, check with local authorities before determining final method of disposal.
The information contained herein is the best that is available. However, BIOMOL International L.P.
cannot guarantee completeness or accuracy and further disclaims all liability for its handling or use.
Printed: January 7, 2004 Created: January 7, 2004
Biomolecules for research MATERIAL SAFETY DATA SHEET
Section 1 : Substance Identification
Ac-IETD-AMC
Name: Catalog Number: P-432
Chemical Class: Peptide
Company Identification: BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462-1202 USA
(610) 941-0430 (9am-5pm ET)
Section 2 : Health Hazard Data
Acute Health Effects: The toxicological properties of this compound have not been
fully investigated.
Exercise appropriate precautions to prevent opportunities for inhalation, and to
prevent direct contact with skin and eyes. All uncharacterized chemicals should
be treated as suspected toxins.
Chronic Health Effects: Unknown
Section 3 : First Aid Measures
Eye Contact: Check for and remove contact lenses. Flush eyes with running water for
at least 15 minutes separating eyelids. Seek medical attention
immediately
Skin Contact: Wash with soap and water for 15 minutes. Remove contaminated
clothing and shoes.
Seek medical attention immediately.
Inhalation: Remove from exposure. If breathing is difficult, administer oxygen. If
breathing stops,
administer artificial respiration. Seek medical attention immediately. Provide
chemical label and MSDS if possible.
Ingestion: Remove dentures and clear mouth. Call physician or poison control
immediately.
Provide chemical label and MSDS information if possible.
Section 4 : Fire and Explosion Data
Flammability: Not Available
Flash Point: Not Available
Combustion Products: Unknown
Extinguishing Media: Carbon Dioxide, Dry chemical powder, polymer foam, water
spray
Special Firefighting Procedures: Use self-contained breathing apparatus and
protective clothing to prevent contact with skin and eyes.
Unusual Fire/Explosion Hazards: Not Available
Section 5 : Spill or Leak Procedures
Cleanup Procedures: EVACUATE AREA Wearing appropriate protective gear as
outlined under 鈥淧rotective equipment鈥? wipe up spill and place in sealed
container and hold for disposal. Avoid raising dust. Ventilate the area and wash spill
site after material has been removed.
Waste Disposal Method: Observe all Federal, State and Local regulations concerning
the disposal of
this product.
Section 6 : Storage and Handling Precautions
Protective Equipment: For spill clean up, wear suitable protective clothing, chemical
resistant rubber
gloves, rubber boots, and chemical safety goggles. Self contained breathing
apparatus or NIOSH/MSHA approved respirator is recommended.
Storage and Handling: This product should be stored at 鈥?20掳C. It should be kept in a
tightly
closed container and desiccated. Protect from light. This product should be
handled only by qualified experienced professionals. Wash thoroughly after
handling this material
Section 7 : Physical Data
Appearance: Lyophilized solid Odor: Not Available
Molecular Weight: 676.0 Taste: Not Available
Boiling Point: Not Available Melting Point: Not
Available
Solubility: DMSO Vapor Density: Not
Available
Specific Gravity: Not Available Vapor Pressure: Not
Available
Volatility: Not Available
Section 8 : Stability and Reactivity Data
Stability: This material is stable if stored as directed
Conditions to Avoid: Exposure to light and moisture
Incompatibles: Not available
Section 9 : Toxicity Data
RTECS#: Not Available
Section 10 : Ecological Data
Ecotoxicological Information: None Available
The above information is believed to be correct but does not purport to be complete and should be used only as a
guide. The burden of safe use of this material rests entirely with the user.
Emergency Contact:
BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting, PA 19462 USA
(610) 941-0430
Last Revised : 1/7/04
Research Sample Material Safety Data Sheet
Hazard Communication Standard (29CFR 1910.1200)
庐 BIOMOL International L.P..
5120 Butler Pike
Plymouth Meeting PA 19462
(610)941-0430
Sample for Experimental Use ONLY
WARNING!
Product Name: DEVD-CHO
The properties of this material have not been fully
investigated. Use due caution in handling and use
of this product. Its chemical, physical and
Catalog Number: P-410 toxicological properties have not been fully
investigated. Exercise due care.
Do not take internally. Avoid breathing dust. Wear
suitable protective clothing and gloves. If any
irritation occurs, get immediate medical attention.
For further information contact BIOMOL
International L.P.
(610)941-0430
Avoid contact with eyes and skin Flammable
Avoid inhalation Health hazard
Avoid proximity of operations to ignition Special hazard _______________
sources
Toxic
Corrosive
Wear lab coat, glasses/goggles and gloves as
Decomposition products hazardous minimum protection
Dust irritant Wear a NIOSH-approved respirator as
minimum protection
Eye contact hazard
Do not release spilled or wasted material to the environment. This material should be handled in a
restricted manner until its degree of risk has been adequately assessed. BIOMOL International L.P..
recommends that waste(s) be transported to a federal- or state-licensed incinerator. State hazardous waste
regulations may vary, check with local authorities before determining final method of disposal.
The information contained herein is the best that is available. However, BIOMOL International L.P.
cannot guarantee completeness or accuracy and further disclaims all liability for its handling or use.
Printed: January 7, 2004 Created: January 7, 2004
庐
Biomolecules for research MATERIAL SAFETY DATA SHEET
Section 1 : Substance Identification
Ac-YVAD-CHO
Name: Catalog Number: P-403
Chemical Class: Peptide Aldehyde
Company Identification: BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462-1202 USA
(610) 941-0430 (9am-5pm ET)
Section 2 : Health Hazard Data
Acute Health Effects: The toxicological properties of this compound have not been
fully investigated.
Exercise appropriate precautions to prevent opportunities for inhalation, and to
prevent direct contact with skin and eyes. All uncharacterized chemicals should
be treated as suspected toxins.
Chronic Health Effects: Unknown
Section 3 : First Aid Measures
Eye Contact: Check for and remove contact lenses. Flush eyes with running water for
at least 15 minutes separating eyelids. Seek medical attention
immediately
Skin Contact: Wash with soap and water for 15 minutes. Remove contaminated
clothing and shoes.
Seek medical attention immediately.
Inhalation: Remove from exposure. If breathing is difficult, administer oxygen. If
breathing stops,
administer artificial respiration. Seek medical attention immediately. Provide
chemical label and MSDS if possible.
Ingestion: Remove dentures and clear mouth. Call physician or poison control
immediately.
Provide chemical label and MSDS information if possible.
Section 4 : Fire and Explosion Data
Flammability: Not Available
Flash Point: Not Available
Combustion Products: Unknown
Extinguishing Media: Carbon Dioxide, Dry chemical powder, polymer foam, water
spray
Special Firefighting Procedures: Use self-contained breathing apparatus and
protective clothing to prevent contact with skin and eyes.
Unusual Fire/Explosion Hazards: Not Available
Section 5 : Spill or Leak Procedures
Cleanup Procedures: EVACUATE AREA Wearing appropriate protective gear as
outlined under 鈥淧rotective equipment鈥? wipe up spill and place in sealed
container and hold for disposal. Avoid raising dust. Ventilate the area and wash spill
site after material has been removed.
Waste Disposal Method: Observe all Federal, State and Local regulations concerning
the disposal of
this product.
Section 6 : Storage and Handling Precautions
Protective Equipment: For spill clean up, wear suitable protective clothing, chemical
resistant rubber
gloves, rubber boots, and chemical safety goggles. Self contained breathing
apparatus or NIOSH/MSHA approved respirator is recommended.
Storage and Handling: This product should be stored at 鈥?20掳C. It should be kept in a
tightly
closed container. This product should be handled only by qualified experienced
professionals. Wash thoroughly after handling this material
Section 7 : Physical Data
Appearance: Lyophilized solid Odor: Not Available
Molecular Weight: 492.0 Taste: Not Available
Boiling Point: Not Available Melting Point: Not
Available
Solubility: DMSO Vapor Density: Not
Available
Specific Gravity: Not Available Vapor Pressure: Not
Available
Volatility: Not Available
Section 8 : Stability and Reactivity Data
Stability: This material is stable if stored as directed
Conditions to Avoid: Not Available
Incompatibles: Not available
Section 9 : Toxicity Data
RTECS#: Not Available
Section 10 : Ecological Data
Ecotoxicological Information: None Available
The above information is believed to be correct but does not purport to be complete and should be used only as a
guide. The burden of safe use of this material rests entirely with the user.
Emergency Contact:
BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting, PA 19462 USA
(610) 941-0430
Last Revised : 1/7/04
庐
Biomolecules for research MATERIAL SAFETY DATA SHEET
Section 1 : Substance Identification
Ac-IETD-CHO
Name: Catalog Number: P-430
Chemical Class: Peptide Aldehyde
Company Identification: BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462-1202 USA
(610) 941-0430 (9am-5pm ET)
Section 2 : Health Hazard Data
Acute Health Effects: The toxicological properties of this compound have not been
fully investigated.
Exercise appropriate precautions to prevent opportunities for inhalation, and to
prevent direct contact with skin and eyes. All uncharacterized chemicals should
be treated as suspected toxins.
Chronic Health Effects: Unknown
Section 3 : First Aid Measures
Eye Contact: Check for and remove contact lenses. Flush eyes with running water for
at least 15 minutes separating eyelids. Seek medical attention
immediately
Skin Contact: Wash with soap and water for 15 minutes. Remove contaminated
clothing and shoes.
Seek medical attention immediately.
Inhalation: Remove from exposure. If breathing is difficult, administer oxygen. If
breathing stops,
administer artificial respiration. Seek medical attention immediately. Provide
chemical label and MSDS if possible.
Ingestion: Remove dentures and clear mouth. Call physician or poison control
immediately.
Provide chemical label and MSDS information if possible.
Section 4 : Fire and Explosion Data
Flammability: Not Available
Flash Point: Not Available
Combustion Products: Unknown
Extinguishing Media: Carbon Dioxide, Dry chemical powder, polymer foam, water
spray
Special Firefighting Procedures: Use self-contained breathing apparatus and
protective clothing to prevent contact with skin and eyes.
Unusual Fire/Explosion Hazards: Not Available
Section 5 : Spill or Leak Procedures
Cleanup Procedures: EVACUATE AREA Wearing appropriate protective gear as
outlined under 鈥淧rotective equipment鈥? wipe up spill and place in sealed
container and hold for disposal. Avoid raising dust. Ventilate the area and wash spill
site after material has been removed.
Waste Disposal Method: Observe all Federal, State and Local regulations concerning
the disposal of
this product.
Section 6 : Storage and Handling Precautions
Protective Equipment: For spill clean up, wear suitable protective clothing, chemical
resistant rubber
gloves, rubber boots, and chemical safety goggles. Self contained breathing
apparatus or NIOSH/MSHA approved respirator is recommended.
Storage and Handling: This product should be stored at 鈥?20掳C. It should be kept in a
tightly
closed container. This product should be handled only by qualified experienced
professionals. Wash thoroughly after handling this material
Section 7 : Physical Data
Appearance: Lyophilized solid Odor: Not Available
Molecular Weight: 502.5 Taste: Not Available
Boiling Point: Not Available Melting Point: Not
Available
Solubility: DMSO Vapor Density: Not
Available
Specific Gravity: Not Available Vapor Pressure: Not
Available
Volatility: Not Available
Section 8 : Stability and Reactivity Data
Stability: This material is stable if stored as directed
Conditions to Avoid: Not Available
Incompatibles: Not available
Section 9 : Toxicity Data
RTECS#: Not Available
Section 10 : Ecological Data
Ecotoxicological Information: None Available
The above information is believed to be correct but does not purport to be complete and should be used only as a
guide. The burden of safe use of this material rests entirely with the user.
Emergency Contact:
BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting, PA 19462 USA
(610) 941-0430
Last Revised : 1/7/04
|