庐
Biomolecules for research MATERIAL SAFETY DATA SHEET
Section 1 : Substance Identification
ALDetect (MDA-specific) Lipid Peroxidation Assay Kit
Name:
Catalog Number: AK-171
Former Name: MDA-specific Assay Kit for Lipid Peroxidation
Company Identification: BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting PA 19462-1202 USA
(610) 941-0430 (9am-5pm ET)
Section 2 : Kit Components
Component # Name / Description Quantity
KI-527 Reagent R1 3 x 18 ml
N-Methyl-2-phenylindole (CAS# 3558-24-5) in solution
in acetonitrile (CAS# 75-05-8)
KI-528 Reagent R2 1 x 16.5 ml
Concentrated Hydrochloric Acid (CAS# 7647-01-0)
KI-529 MDA Standard 1 ml
1,1,3,3-tetramethoxypropane (TMOP, CAS# 102-52-3)
in solution in Tris-HCl
KI-530 BHT 2 ml
Butylated hydroxytoluene (CAS# 128-37-0)
in solution in acetonitrile (CAS# 75-05-8)
KI-531 Probucol 1.1 ml
Probucol (CAS# 23288-49-5) in solution in
methanol (CAS# 67-56-1)
KI-532 Methanol 30 ml
(CAS# 67-56-1)
AK-171 Instruction booklet 1 booklet
Section 3 : Health Hazards
The physical, chemical and toxicological properties of many of many of these have not yet been fully
investigated in the form in which they are supplied in this kit. All kit components should be considered
toxic, and Reagent R2 should be considered corrosive as well. It is therefore advised that all laboratory
personnel handling this product follow standard laboratory safety procedures. It is recommended that
personnel wear safety goggles, gloves, and protective clothing at all times, and avoid direct contact with
any of the reagents supplied in this kit.
Section 4 : First Aid
Eye Contact: Check for and remove contact lenses. Flush eyes with running water for at least 15
minutes separating eyelids. Seek medical attention immediately
Skin Contact: Wash with soap and water for 15 minutes. Remove contaminated clothing and shoes.
If irritation or discomfort develops, seek medical attention.
Inhalation: Remove from exposure. If breathing is difficult, administer oxygen. If breathing stops,
administer artificial respiration. Seek medical attention if patient feels unwell or develops any
respiratory symptoms. Provide chemical label and MSDS if possible.
Ingestion: Remove dentures and clear mouth. If person is conscious, rinse mouth with water. Call
physician or poison control immediately. Provide chemical label and MSDS information if
possible.
Section 5 : Fire / Flammability Information
Flammability: The solvents methanol and acetonitrile are flammable, vapor may travel considerable
distance to source of ignition and flashback. Open flames and ignition sources should be
avoided when working with this kit
Flash Point: Not Known
Combustion Products: Not Known
Extinguishing Media: Carbon Dioxide, Dry chemical powder
Special Firefighting Procedures: Use self-contained breathing apparatus and protective clothing to
prevent contact with skin and eyes.
Unusual Fire/Explosion Hazards: The flammable components in the acetylation kit can travel
considerable distances as vapor and may experience flashback.
Section 6 : Spill or Leak Procedures.
Cleanup Procedures: Wearing appropriate protective gear as outlined under 鈥淧rotective equipment鈥?
wipe up spill, place in sealed container and hold for appropriate disposal. Wash spill site with soap
and water.
Waste Disposal Method: Dilute waste solutions and reagents with water and dispose of in accordance
with federal, state, and local regulations.
Section 7 : Storage and Handling Precautions
Protective Equipment: For spill clean up, wear suitable protective clothing, chemical resistant rubber
gloves, rubber boots, and chemical safety goggles. Self contained breathing apparatus or
NIOSH/MSHA approved respirator is recommended.
Storage and Handling: The components of this kit should be stored 4掳C. DO NOT FREEZE KIT
COMPONENTS. All components should be kept in tightly closed containers. This product
should be handled only by qualified experienced professionals. Wash thoroughly after handling
the materials included in this kit.
Section 8 : Stability and Reactivity Data
Stability: This material is stable if stored as directed
Conditions to Avoid: Protect from exposure to excessive moisture.
Incompatibles: Unknown. Do not use kit components for any applications other then those described
in the booklet provided.
Section 9 : Relevant RTECS Numbers
RTECS # Name Vial #
AL7700000 Acetonitrile KI-527
PC1400000 Methanol KI-533
GI7875000 BHT KI-530
Section 10 : Ecological Data
Ecotoxicological Information: None Available
The above information is believed to be correct but does not purport to be complete and should be used only as a guide. The burden of
safe use of this material rests entirely with the user.
Emergency Contact:
BIOMOL International L.P.
5120 Butler Pike
Plymouth Meeting, PA 19462 USA
(610) 941-0430
Last Revised : 8/13/08
|