MATERIAL SAFETY DATA SHEET
in accordance with communitary directive 2001/58/EC
Section I - Identification of Product and Company
Trade Product Name: Preparation/Revision Date:
Optibond FL Prime 09/03
Emergency phone:
Company Name:
(+41)-91-61.00.639
Kerr Corporation
Information phone:
Company Address:
00-800-41-050-505
1717 W.Collins Avenue Orange CA 92867 U.S.A.
Section II - Composition/Information on Ingredients
HAZARDOUS INGREDIENTS % SYMBOL R CAS N. EINECS N.
Ethyl Alcohol 22 F 11 64-17-5 200-578-6
Section III - Hazards Identification
HAZARD CLASSIFICATION Highly flammable
Section IV - First Aid Measures
Treatment for eye contact: Flush with water for at least 15 minutes.
Treatment for skin contact: Wash thoroughly with soap and water. Use hand cream.
Treatment for inhalation (breathing): Move to fresh air.
Treatment for ingestion (swallowing): Do not give liquids if person is unconscious. Contact a physician
Section V - Firefighting Measures
Suitable extinguishing media: Carbon dioxide, dry chemical, water spray.
Forbidden extinguishing media: Not determined.
Special firefighting measures: None.
Unusual fire and explosion hazards: None.
Special protection equipment: Sealed overall.
Page 1 of 6
Optibond FL Prime
Material Safety Data Sheet for:
Section VI - Accidental Release Measures
Personal Precautions: Follow recommended precautions listed in other sections.
Environmental Precautions: Material should not be allowed to drain to sewers.
Reclaiming Methods: Dilute with water, wipe with cloth and transfer to suitable container for disposal.
Incinerate liquid in proper equipment.
Section VII - Handling and Storage
Handling Precautions: Keep away from ignition sources.
Precautions in case of Fire and Explosion: Extinguish all ignition sources.
Storage Conditions: Store in a cool, dry place.
Suggested container(s): The original containers provided by manufacturer.
Indication for Combined Storage: Avoid contact with oxidizing agent.
Other Precautions: Material should not be allowed to drain to sewers. Use according to directions
Section VIII - Exposure controls/personal protection
Precautionary Ventilation
Measures Local Exhaust Ventilation: Recommended to keep exposure under threshold
hazard limits.
Special Ventilation: None.
Mechanical (General) Ventilation: Not applicable.
Other Ventilation: Not applicable.
Limits TWA: 1,000 ppm; PEL: 1,000 ppm
Respiratory Not needed.
Protection
Hands Protection Latex gloves recommended.
Eyes Protection Safety glasses with side shields.
Skin Protection Handle in accordance with good personal hygiene and safety practices. These
practices include avoiding unnecessary exposure to uncured material.
Other Protective It would be better use a lab coat.
Equipments:
Section IX - Physical and Chemical Properties
Melting Point: Not applicable
Boiling Point: Not established
Specific Gravity: 0.96g/ml
Vapor Pressure: Not established
Evaporation Rate (n-butane=1): Not established Vapor Density (air=1): Not established
Solubility in Water: Soluble
Appearance and Odor (Physical Form): Pale yellow liquid with a fruity odor.
Flash Point: 64掳F (18掳C) Upper explosivity limit: Not Lower explosivity limit: Not
established established
Page 2 of 6
Optibond FL Prime
Material Safety Data Sheet for:
Section X - Stability and Reactivity
Stability: Stable.
Conditions to Avoid: Heat, sparks, open flame..
Incompatibility ( Materials to Avoid ): Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide.
Hazardous Polymerization Products: Will not occur.
Section XI - Toxicological Information
Carcinogenicity/Teratogenicity: No.
Effects and Hazards of Overexposure ( Acute and Chronic )
Effects and hazards of eye contact: May cause a mild irritation.
Effects and hazards of skin contact: May cause a mild irritation.
Effects and hazards of Inhalation (Breathing): May cause irritation of the throat.
Effects and hazards of Ingestion (Swallowing): May be poisonous by ingestion.
Effects for prolonged Exposure: Not applicable.
Section XII - Ecological Information
There is no specific information on the product. Use according to good working practices, avoiding release of
the product into environment.
Environmental effects for Ethyl alcohol:
Aquatic toxicity: LC50 > 10000 mg/l (fish)
Section XIII - Disposal Considerations
Extinguish all ignition sources. May be absorbed with suitable material and transferred in container for disposal.
Section XIV - Transport Information
SEA TRANSPORTATION
IMCO Number 3074
UN Number 1170
Substance(s) determining hazard Ethyl Alcohol
AIR TRANSPORTATION
ICAO/IATA Class 3
Substance(s) determining hazard Ethyl Alcohol
TRANSPORTATION BY ROAD/RAILWAY
RID/ADR 3 Item 3掳 Hazard Identification 33 Substance 1170 Hazard 3
Class Numbe b Number Identification Number Label
Page 3 of 6
Optibond FL Prime
Material Safety Data Sheet for:
r
Page 4 of 6
Optibond FL Prime
Material Safety Data Sheet for:
Section XV - Regulatory Information
CLASSIFICATION IN ACCORDANCE WITH EC DIRECTIVES
HAZARD IDENTIFICATION SYMBOL F
R Sentences
11 Highly flammable
S Sentences
7 Keep container tightly closed
16 Keep away from sources of ignition - No smoking
Ingredients determining the label Ethyl Alcohol
Page 5 of 6
Optibond FL Prime
Material Safety Data Sheet for:
CAUTION: PRODUCT FOR PROFESSIONAL USE
The information on this Safety Sheet is based on presently available data and to our best knowledge for
the correct handling of the product under normal conditions. Any use of this product in any way not
indicated on this Sheet or the use of this product together with any other process/procedure will be
exclusively under the user鈥檚 responsibility.
Page 6 of 6
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP