SAFETY DATA SHEET
FEBGUARD EPOXY MORTAR - BASE
1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY
PRODUCT NAME: FEBGUARD EPOXY MORTAR - BASE
PART No.: F355636
SUPPLIER: MBT Feb
Albany House
Swinton Hall Road
Swinton Manchester M27 4DT
TEL: (+44) 161 794 7411
FAX: (+44) 161 727 8547
2 COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME CAS No. CONTENTS HEALTH RISK
(class) (R No.)
REACTION PRODUCT BISPHENOL A 25085-99-8 60-100 % Xi, N 36/38, 43, 51/53
REACTION PRODUCT BISPHENOL F 28064-14-4 5-10 % Xi, N 36/38, 43, 51/53
ALKYLGLICIDYLETHER 68081-84-5 5-10 % Xi, N 36/38, 43, 51/53
COMPOSITION COMMENTS: Two component epoxy resin based product.
: Base component based on bisphenol A epoxy resin.
3 HAZARDS IDENTIFICATION
Irritating to eyes and skin.
May cause sensitisation by skin contact.
Toxic to aquatic organisms.
May cause long-term adverse effects in the aquatic environment.
4 FIRST AID MEASURES
INHALATION: Move the exposed person to fresh air at once. Get medical attention if any discomfort
continues.
INGESTION: DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK
FLUIDS! Rinse mouth thoroughly. Promptly get affected personnel to drink large volumes of
water to dilute the swallowed chemical. Obtain medical advice Provide rest, warmth and
fresh air.
SKIN: Important to remove the substance from the skin immediately. Wash the skin immediately
with soap and water. Get medical attention promptly if symptoms occur after washing.
Chemical burns must be treated by a physician.
EYES: Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash
eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes
and get medical attention.
Page 1 / 4 >>>
FEBGUARD EPOXY MORTAR - BASE
5 FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: Fire can be extinguished using: Water spray. Powder, foam or CO2.
6 ACCIDENTAL RELEASE MEASURES
PRECAUTIONS TO PROTECT ENVIRONMENT:
Avoid subsoil penetration. Prevent product from entering drains. Do not contaminate surface
water.
SPILL CLEANUP METHODS: Soak up with inert absorbent material. Sweep up and shovel into suitable containers for
disposal. Wear necessary protective equipment.
7 HANDLING AND STORAGE
USAGE PRECAUTIONS: Provide sufficient air exchange and/or exhaust in work rooms. Handle and open container
with care. Avoid formation of aerosol
STORAGE PRECAUTIONS: Keep away from food and drink. Keep container tightly closed at room temperature in the
original container.
8 EXPOSURE CONTROLS AND PERSONAL PROTECTION
PROTECTIVE EQUIPMENT:
VENTILATION: Provide adequate general and local exhaust ventilation.
RESPIRATORS: In case of insufficent ventilation wear suitable respiratory equipment.
PROTECTIVE GLOVES: Use protective gloves.
EYE PROTECTION: Use approved safety goggles or face shield.
HYGIENIC WORK ROUTINES: DO NOT SMOKE IN WORK AREA! Wash at the end of each work shift and before eating,
smoking and using the toilet. Promptly remove any clothing that becomes contaminated.
Wash promptly if skin becomes contaminated. No eating or drinking while working with this
material.
9 PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: Liquid. COLOUR: Clear.
SOLUBILITY DESCRIPTION: Immiscible with water. BOILING POINT (掳C): >200
pH-VALUE,CONC: N/A pH-VALUE: N/A
10 STABILITY AND REACTIVITY
STABILITY: Normally stable.
CONDITIONS TO AVOID: Take necessary action to avoid static electricity discharge
MATERIALS TO AVOID: Strong acids and strong bases strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS:
Burning produces obnoxious and toxic fumes. Carbon Oxides
Page 2 / 4 >>>
FEBGUARD EPOXY MORTAR - BASE
11 TOXICOLOGICAL INFORMATION
TOXICOLOGICAL DATA:
Acute toxicity. LD50. Oral. Rat. >5000 mg/kg
SKIN: May cause sensitisation by skin contact.
12 ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL DATA:
Acute toxicity. LC50 96 hours fish 2.4mg/l
Acute toxicity. LC50 96 hours Daphnia 3.6mg/l
ENVIRONMENTAL HAZARDS: Avoid subsoil penetration. Do not let product enter drains. Do not comtaminate surface
water.
DEGRADABILITY: Not really Biodegradeable
13 DISPOSAL CONSIDERATIONS
DISPOSAL METHODS: Dispose of in accordance with Local Authority requirements.
14 TRANSPORT INFORMATION
LABEL FOR CONVEYANCE:
ROAD:
UN No: 3082
HAZARD CLASS (ADR): Class 9: Miscellaneous dangerous substances and articles.
ADR CLASS No: 9 ADR ITEM No: 11 (c)
PROPER SHIPPING NAME I: ENVIROMENTALLY HAZARDOUS SUBSTANCE, LIQUID, NOS (Contains Epoxy Resin)
RAIL:
RAIL TRANSPORT CLASS No: 9 RAILROAD PT: 11 (c)
SEA:
SEA TRANSPORT CLASS No: Not Regulated
AIR:
AIR TRANSPORT CLASS No: Not Regulated
Page 3 / 4 >>>
FEBGUARD EPOXY MORTAR - BASE
15 REGULATORY INFORMATION
LABEL FOR SUPPLY:
RISK PHRASES: R-36/38 Irritating to eyes and skin.
R-43 May cause sensitisation by skin contact.
SAFETY PHRASES: S-26 In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
S-37 Wear suitable gloves.
S-24/25 Avoid contact with skin and eyes.
P-5 Contains epoxy constituents. See information supplied by the
manufacturer.
S-60 This material and its container must be disposed of as hazardous
waste.
GUIDANCE NOTES: Occupational Exposure Limits EH40.
Introduction to Local Exhaust Ventilation HS(G)37.
CHIP for everyone HSG(108).
16 OTHER INFORMATION
REVISION DATE: 01/10/01
REVISION No. /REPLACES SDS ISSUED:
Issue 1
SDS No.: SDS0186
Page 4 / 4
|