MATERIAL SAFETY DATA SHEET
Plastocrete 161
HMIS
HEALTH 2
FLAMMABILITY 0
REACTIVITY 0
D
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 08/25/2005
Product Name: Plastocrete 161
CAS Number: Not Established
Chemical Family: Inorganic salt solution
MSDS Number: 3706
Product Code: P161540
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
TRIETHANOLAMINE 102-71-6 0-5
3. Hazards Identification
Eye Hazards
Causes eye irritation.
Skin Hazards
Causes skin irritation.
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
Causes respiratory tract irritation.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Plastocrete 161
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Extinguishing Media
Aqueous solution, will not support combustion. Use the appropriate extinguishing media for the surrounding fire.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained breathing
apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Store in a cool, dry, well ventilated area. Keep containers tightly closed. Keep out of reach of children. Keep from
freezing. Allow to warm to room temperature and mix well before using.
Work/Hygienic Practices
Wash thoroughly after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable exposure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by the
American Conference of Governmental Industrial Hygienists for information on the design, installation, use, and
maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
In areas where the Permissible Exposure Limits are exceeded, use a properly fitted NIOSH-approved respirator. A
respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Plastocrete 161
8. Exposure Controls/Personal Protection - Continued
Other/General Protection
Wash thoroughly after handling.
Ingredient(s) - Exposure Limits
TRIETHANOLAMINE
ACGIH TLV-TWA 5 mg/m3
9. Physical And Chemical Properties
Appearance
Brown liquid
Odor
Aromatic Odor
Chemical Type: Mixture
Specific Gravity: 1.24
Packing Density: 10.35 lbs/gal
Solubility: Soluble In Water
Evaporation Rate: Slower Than Ether
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will Not Occur
Conditions To Avoid (Stability)
None known
Incompatible Materials
None known
Hazardous Decomposition Products
None known
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the US D.O.T.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Plastocrete 161
15. Regulatory Information - Continued
U.S. Regulatory Information - Continued
SARA Hazard Classes
Acute Health Hazard
Ingredient(s) - State Regulations
TRIETHANOLAMINE
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
16. Other Information
HMIS Rating
Health: 2
F ir e : 0
Reactivity: 0
PP E: D
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 08/02/2005
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use in
combination with any other material or in any process. The information set forth herein is based on technical data
that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we make no
warranties, express or implied and assume no liability in connection with any use of this information. Nothing
herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|