MATERIAL SAFETY DATA SHEET
LPS® PF® Solvent
Revision 4 Revision Date: 6/20/08 Supercedes:12/15/05
Section 1 � Product and Company Identification
LPS® PF® Solvent
Product Name:
61400, 61410, 61432, 61401, 61405, 61420 (aerosol), 61455, 61456, C61400,
Part Number:
C61410, C61432, C61401, C61405, C61420 (aerosol), C61455, C61456
Petroleum Hydrocarbon
Chemical Name:
A solvent agent designed for removing grease, oil and other residues from metal, power
Product Use:
cable and fiber optic cable surfaces.
LPS Laboratories, 4647 Hugh Howell Rd., Tucker, GA, USA 30084
Manufacturer Information:
1 770-243-8800
TEL:
1-800-424-9300 Chemtrec;
Emergency Telephone
Outside U.S.: (703) 527-3887
Number:
1 770-243-8899
FAX:
http://www.lpslabs.com
Website:
PLAIN LANGUAGE HAZARD SUMMARY
Material Safety Data Sheets can be confusing. Federal and State laws require us to include a great deal of technical
information that probably won’t help the non-professional. LPS includes this “PLAIN LANGUAGE HAZARD SUMMARY� to
address the questions and concerns of the average worker. If you have additional health, safety or product questions,
don’t hesitate to call us at 800/241-8334.
Worker Toxicity
LPS® PF® Solvent is designed to remove grease, grime, oil and other oil-based contaminants from a variety of substrates,
including automotive and miscellaneous metallic parts. It contains d-limonene and paraffinic hydrocarbons that can be irritating to
skin. We suggest you wear gloves and avoid extended exposure to unprotected skin. Don’t get it in your eyes (it stings), or breath
large amounts of the vapor, (it will dry out your nasal passages and if you breathe large amounts in poorly ventilated areas it can
® ®
make you dizzy and even sick). Don’t spray LPS PF Solvent for extended periods without adequate ventilation. If you’re going
to perform work involving a lot of product in a poorly ventilated area, use of a respirator or even a self-contained breathing
apparatus may be necessary. For more exposure and first aid information, refer to MSDS Sections 2, 8 and 11.
Flammability
LPS® PF® Solvent aerosol generates a “flame extension� when sprayed into an ignition source (flame, arc, etc.); whereas the
bulk fluid has a flash point above 140oF, it is generally safe to use for most industrial applications. Store product away from heat
sources and do not spray into live electrical equipment.
Disposal
® ® ® ®
If you spill LPS PF Solvent, notify the proper environmental or safety department at your company right away. If LPS PF
Solvent becomes contaminated with another substance and is rendered unusable for cleaning, the resulting mixture may fall
under at least one hazardous classification.
Page 1 of 8
MATERIAL SAFETY DATA SHEET
LPS® PF® Solvent
Revision 4 Revision Date: 6/20/08 Supercedes:12/15/05
Section 2 � Hazards Identification
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
Emergency Overview:
Aerosol: DANGER: Flammable. Contents under Pressure. Harmful or fatal is swallowed.
Bulk: DANGER: Combustible Liquid. Harmful or fatal if swallowed.
Primary route(s) of entry: Skin and Eye contact. Inhalation.
Potential Acute Health Effects:
Irritating to eyes
Eyes
Repeated exposure may cause skin dryness or cracking.
Skin
Excessive inhalation of vapors can cause irritation of the respiratory tract, nausea, dizziness or headache.
Inhalation:
Product has a low order of acute oral toxicity, but ingestion of large quantities may cause nausea,
Ingestion:
vomiting, and gastrointestinal irritation. May cause injury if aspirated into lungs.
Potential Chronic Health Effects:
Carcinogenic Effects: NTP: No IARC: No OSHA: No
Mutagenic Effects: None
Teratogenic Effects: None
Medical conditions aggravated by exposure: Persons with pre-existing central nervous system (CNS) disease,
neurological conditions, skin disorders, chronic respiratory diseases, or impaired liver or kidney function should avoid
exposure.
Signs and Symptoms
Stinging in eyes. Repeated or prolonged skin contact can cause redness, irritation, and scaling of the skin (dermatitis).
Breathing of high vapor concentrations may cause headaches, stupor, irritation of throat and eyes, and kidney effects.
Section 3 � Composition / Information on Ingredients
Component
CASRN Percent by Weight
Paraffinic hydrocarbon
64771-72-8 80 - 100
d-limonene
5989-27-5 5 - 10
Carbon dioxide (aerosol only)
124-38-9 1-5
Page 2 of 8
MATERIAL SAFETY DATA SHEET
LPS® PF® Solvent
Revision 4 Revision Date: 6/20/08 Supercedes:12/15/05
Section 4 � First Aid Measures
Check for and remove contact lenses. If irritation or redness develops, flush eyes with cool, clean, low
Eyes:
pressure water for at least 15 minutes. Hold eyelids apart to ensure complete irrigation of the eye and
eyelid tissue. Do not use eye ointment. Seek medical attention immediately.
Remove contaminated shoes and clothing. Clean affected area thoroughly with mild soap and water. Do
Skin:
not use ointments. Seek medical attention if irritation persists.
Immediately move victim to fresh air. If victim is not breathing, immediately begin rescue breathing. If heart
Inhalation:
has stopped, immediately begin cardiopulmonary resuscitation (CPR). If breathing is difficult, seek medical
attention immediately.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to
Ingestion:
an unconscious person. If spontaneous vomiting is about to occur, place victim’s head below knees. If
victim is drowsy or unconscious, place on the left side with head down. Do not leave victim unattended.
Seek medical attention immediately.
Section 5 � Fire Fighting Measures
Products of Combustion: Carbon monoxide and carbon dioxide. NFPA Class: IIIA Liquid
Firefighting media: SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Cool containing vessels with water jet in order to
prevent pressure build-up, autoignition or explosions.
Sensitivity to Impact: None. Sensitivity to Static Discharge: None.
Protection Clothing (Fire): Firefighters must use full bunker gear including NIOSH-approved positive pressure self-
contained breathing apparatus to protect against potential hazardous combustion or decomposition products and oxygen
deficiencies. Evacuate area and fight the fire from a maximum distance or use unmanned hose holders or monitor
nozzles.
Special Remarks on Explosion Hazards: High heat will cause product to boil, evolving vapor that could cause explosive
rupture of closed containers. Aerosols may explode upon heating, spread fire and overcome sprinkler systems.
Section 6 � Accidental Release Measures
Contain and recover spilled liquid when possible.
Containment
Procedures
Absorb with an inert material and dispose of properly.
Clean-Up Procedures Small Spill and Leak:
Secure the area and control access. Dike far ahead of a liquid
Large Spill and Leak:
spill to ensure complete collection. Pick up free liquid for
disposal using absorbent pads, sand, or other inert non-
combustible absorbent materials. Place into appropriate waste
containers for later disposal.
Ventilate area of leak or spill. Keep unnecessary and unprotected people away.
Evacuation
Procedures
Remove all sources of ignition. Ventilate area. Wear appropriate protective equipment during
Special Procedures
cleanup.
Page 3 of 8
MATERIAL SAFETY DATA SHEET
LPS® PF® Solvent
Revision 4 Revision Date: 6/20/08 Supercedes:12/15/05
Section 7 � Handling and Storage
Handling: DO NOT spray into or around ignition sources. Do not allow material to come into contact with eyes or skin.
Wear appropriate protective equipment during handling. Keep container closed. Do not breathe vapors or mists. Use only
with adequate ventilation. Wash thoroughly after handling.
Storage: Keep container in a cool, well-ventilated area. Avoid all sources of ignition (spark or flame). Store below 120°F.
Precautions to be taken in handling and storage: Store aerosols as Level 3 Aerosol (NFPA 30B). Store all materials in
dry, well-ventilated area. Avoid breathing vapors.
Section 8 � Exposure Controls / Personal Protection
Exposure Guidelines:
OSHA
Component CASRN OSHA STEL ACGIH-TLV ACGIH-STEL NIOSH REL
TWA-PEL
Not Not Not
Paraffinic hydrocarbon 64771-72-8 180 ppm* 100 ppm
Established Established Established
Not Not
Not Not Not
d-limonene 5989-27-5
Established Established
Established Established Established
5000 ppm
Carbon Dioxide TWA
124-38-9 5000 ppm 30000 ppm 5000 ppm 30000 ppm
(aerosol only) 30000 ppm
STEL
* Supplier Recommendation
Provide general and/or local exhaust ventilation to keep exposures below the exposure guidelines
Engineering measures
listed above.
Personal protective equipment
Safety glasses with side shields conforming to appropriate regulations. Eye wash fountain and
Eye protection
emergency shower facilities are recommended.
Normally no hand protection is required; however, if product will be sprayed for an extended period,
Hand protection
“overspray� onto skin may occur. If so, use chemical resistant gloves (i.e., nitrile) conforming to
appropriate regulations. Please observe the instructions regarding permeability and breakthrough
time that are provided by the supplier of the gloves.
Typical use of this product under normal conditions does not require the use of respiratory
Respiratory protection
protection. If airborne concentrations are above the applicable exposure limits (listed above),
use NIOSH approved respiratory protection (i.e., organic vapor cartridge).
Wash throughly after handling. Have eye-wash facilities immediately available.
General Hygiene
Considerations
Page 4 of 8
MATERIAL SAFETY DATA SHEET
LPS® PF® Solvent
Revision 4 Revision Date: 6/20/08 Supercedes:12/15/05
Section 9 � Physical and Chemical Properties
Liquid. Colorless / water-white
Appearance: Color:
o
Orange <5 mmHg at 20 C
Odor/Taste: Vapor Pressure:
o
Not soluble in water. <5 mmHg at 20 C
Solubility Description: Rule 1171 PPc:
o
193°C (379 F) 3.2 (BuAc=1)
Boiling Point: Evaporation Rate:
@ 760mmHg
o
62°C (144 F)
0.74-0.78 @ 20 °C
Specific Gravity (Water=1): Flash Point:
>1 Tag-Closed Cup.
Vapor Density (air=1): Flash Point Method:
100%, 760 g/L, 6.34 #/gal. Not Established
V.O.C. Content: Auto Ignition
Per C.A.R.B / O.T.C. and Temperature (°C):
S.C.A.Q.M.D. Rule 102
LOWER: 1.3% <1
Flammable limits (estimated): Partition Coefficient
UPPER: 8.9% (octanol/water):
o
<3 cSt @ 25 C 100%
Volatiles:
Viscosity:
Not applicable Not Established
pH: Auto Ignition
Temperature (°C):
Section 10 � Stability and Reactivity
Product is stable under recommended storage conditions.
Chemical Stability:
Keep away from heat and ignition sources.
Conditions to Avoid:
Reactive or incompatible with oxidizing agents.
Incompatibility:
These products are carbon oxides ( CO, CO2)
Hazardous Decomposition:
Will not occur.
Hazardous Polymerization:
Section 11 � Toxicological Information
A: General Product Information
An acute toxicity study of this product has not been conducted. Information given in this section relates only to individual
constituents contained in this preparation.
Page 5 of 8
MATERIAL SAFETY DATA SHEET
LPS® PF® Solvent
Revision 4 Revision Date: 6/20/08 Supercedes:12/15/05
B: Component Analysis
Component CASRN LC-50 LD-50
Paraffinic hydrocarbon 64771-72-8 Not established > 5000 mg/kg (oral, rat)
>5000 mg/kg (oral, rabbit)
d-limonene 5989-27-5 Not established
>5000 mg/kg (dermal, rabbit)
Carbon Dioxide (aerosol
124-38-9 Not established Not established
only)
Section 12 � Ecological Information
Highly volatile. Not expected to Readily biodegradable
Mobility: Persistence and
partition to sediment. degradability:
No bioaccumulation potential None known.
Bioaccumulative Other adverse effects:
potential:
Ecotoxicology:
Effect on
Component CASRN Test Species Results
Organisms
d-limonene 5989-27-5 4-day LC50 35,000 μg/L
Oncorhynchus mykiss
Acute Toxicity on
Fishes
d-limonene 5989-27-5 96-hour EC50 1,490,000 μg/L
Pimephales promelas
Acute Toxicity on
Daphnia
Bacterial inhibition
No Data Available
Growth inhibition of
algae
Bioaccumulation in
fish
Section 13 � Disposal Considerations
In its purchased form, non-aerosol material does not meet the definition of a RCRA hazardous waste.
Waste Status:
Aerosol products, if depressurized and emptied to less than 2.5 cm of fluid contents are classified as
non-hazardous waste under 40 CFR 261.7 (U.S.). However, if disposed of in its received form, an
aerosol carries waste code D003. (U.S.)
Waste must be disposed of in accordance with federal, state, provincial, and local environmental
Disposal:
control regulations.
Chemical additions to, processing of, or otherwise altering this material may make this waste
Note:
management information inaccurate, incomplete, or otherwise inappropriate. Furthermore, state and
local waste disposal requirements may be more restrictive than federal laws and regulations.
Page 6 of 8
MATERIAL SAFETY DATA SHEET
LPS® PF® Solvent
Revision 4 Revision Date: 6/20/08 Supercedes:12/15/05
Section 14 � Transport Information
Aerosols Only
ORM-D NA
Shipping Name: UN Number:
D.O.T. Ground
NA NA
Hazard Class: Technical Name:
ORM-D
NA
Subclass: Hazard Label:
Already on box
1950 2
UN no: ADR Class:
NA 5F
Packing group: Classification code:
Road/Rail -
ADR/RID : Name and
AEROSOLS, Flammable NA
Hazard ID no:
Description:
2.1
Labeling:
1950 2.1
UN no: Class:
AEROSOLS 2.1
Shipping Name: Subsidiary Risk:
IMDG-IMO
Packing
P003, LP02 NA
Packing group:
Instructions:
NO F-D, S-U
Marine pollutant: EmS:
1950 2.1
UN no: Class:
AEROSOLS, Flammable NA
Shipping Name: Subclass
IATA-ICAO:
Packing
NA NA
Packing group:
instructions:
Flammable Gas
Labeling:
Non-aerosol and bulk versions of this product are not regulated by any mode of transportation.
Section 15 � Regulatory information
U.S. Federal Regulations
RCRA Hazardous Waste No.: D003 (aerosols only)
Comprehensive Environmental Response and Liability Act of 1980 (CERCLA): None
Toxic Substances Control Act (TSCA):
All components of this product are TSCA inventory listed and/or are exempt.
Superfund Amendments and Reauthorization Act (SARA) Title III
SARA Section 311/312 (40 CFR 370) Hazard Categories:
Sudden Release of Pressure (aerosols only), Fire Hazard, Immediate (Acute) Health Hazard, Delayed (Chronic)
Health Hazard
This product contains the following toxic chemical(s) subject to reporting requirements of SARA Section 313
(40 CFR 372):No individual section 313 component is present at or above 1%
Section 112 Hazardous Air Pollutants (HAPs): None
Page 7 of 8
MATERIAL SAFETY DATA SHEET
LPS® PF® Solvent
Revision 4 Revision Date: 6/20/08 Supercedes:12/15/05
State Regulations
New Jersey RTK:
Aerosol: Paraffinic Hydrocarbon 64771-72-8 â—? d-limonene 5989-27-5 â—? Carbon Dioxide 124-38-9
Bulk: Paraffinic Hydrocarbon 64771-72-8 â—? d-limonene 5989-27-5
California: This product does not contain chemical(s) known to the State of California to cause cancer, birth defects or
reproductive harm.
California and OTC States: This product conforms to consumer regulations.
International Regulations
Canadian Environmental Protection Act: All of the components of this product are included on the Canadian Domestic
Substances list (DSL).
Canadian Workplace Hazardous Materials Information System (WHMIS):
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
WHMIS Classification: Aerosol WHMIS Classification: Bulk
Class A, Class B5, Class D2B Class B3, Class D2B
Other Regulations
Montreal Protocol listed ingredients: None.
Stockholm Convention listed ingredients: None.
Rotterdam Convention listed ingredients: None.
RoHS Compliant: Yes.
Section 16 � Other Information
HMIS 1996 HMIS III NFPA
MSDS# 162420
Health: 1 Health: [/]1 Flammability
Responsible Name:
Flammability: aerosol 4
Clea Johnson
Flammability: 2
Regulatory Affairs Coordinator 2
Flammability: bulk 2
1
Health Reactivity
0
Physical Hazard: aerosol 2
Reactivity 0
Physical Hazard: bulk 0
Notice to Reader:
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier
nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained
herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee
that these are the only hazards that exist.
Clea Johnson, Regulatory Affairs Coordinator
LPS Laboratories, A division of Illinois Tool Works
Page 8 of 8
|