MATERIAL SAFETY DATA SHEET
Tapmatic庐 Edge Lube
Revision 3 Revision Date 7/30/08 Supercedes: 1/31/03
Section 1 鈥? Product and Company Identification
Tapmatic庐 Edge Lube
Product Name:
43200, C43200
Part Number:
Blended Compound
Chemical Name:
A metal-cutting lubricant designed for metal cutting and forming
Product Use:
applications.
LPS Laboratories, 4647 Hugh Howell Rd., Tucker, GA, USA 30084
Manufacturer Information:
1 770-243-8800
TEL:
1-800-424-9300 Chemtrec;
Emergency Telephone Number:
Outside U.S.: (703) 527-3887
1 770-243-8899
FAX:
http://www.lpslabs.com
Website:
PLAIN LANGUAGE HAZARD SUMMARY
Material Safety Data Sheets can be confusing. Federal and State laws require us to include a great deal of technical
information that probably won鈥檛 help the non-professional. LPS includes this 鈥淧LAIN LANGUAGE HAZARD SUMMARY鈥?
to address the questions and concerns of the average worker. If you have additional health, safety or product questions,
don鈥檛 hesitate to call us at 800/241-8334.
Worker Toxicity
Tapmatic庐 Edge Lube is an industrial chemical designed as a lubricant for metal cutting and forming applications. It is a
biodegradable cutting lubricant for high-efficiency applications on all metals. It has a low toxicity but can be irritating to
eyes and skin. Wear protective eyewear while using it and avoid prolonged skin exposure. If the product gets on clothing
(and even shoes), remove the affected clothing and launder it before wearing it again. For more exposure and first aid
information, refer to SDS Sections 2, 3, 8 and 11.
Flammability
Tapmatic庐 Edge Lube is non-flammable having a flash point above 330掳F. For more information on flammability, refer to
MSDS section 5.
Disposal
If Tapmatic庐 Edge Lube becomes contaminated with another substance and is rendered unusable, the resulting mixture
may fall under at least one hazardous classification. See section 13 for more details.
Page 1 of 7
MATERIAL SAFETY DATA SHEET
Tapmatic庐 Edge Lube
Revision 3 Revision Date 7/30/08 Supercedes: 1/31/03
Section 2 鈥? Hazards Identification
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
Emergency Overview: CAUTION: May be an eye irritant.
Primary route(s) of entry: Skin and Eye contact.
Potential Acute Health Effects:
Irritating to eyes.
Eyes:
Repeated exposure may cause skin dryness or cracking.
Skin:
Low order of toxicity, but may irritate respiratory system.
Inhalation:
Not a likely route of exposure. Ingestion may result in nausea, abdominal discomfort, or diarrhea. If
Ingestion:
swallowed, call a physician immediately. ONLY induce vomiting at the instruction of a physician.
Never give anything by mouth to an unconscious person.
Potential Chronic Health Effects:
Carcinogenic Effects: NTP: No OSHA: No ACGIH: No
Mutagenic Effects: None
Teratogenic Effects: None
Target Organs: None
Medical conditions aggravated by exposure: None known at this time.
Signs and Symptoms:
Stinging in eyes. Repeated or prolonged skin contact can cause redness, irritation, and scaling of the skin (dermatitis).
Section 3 鈥? Composition /Information on Ingredients
Component CASRN Weight Percent
Alcohols, C10-16,ethoxylated 68002-97-1 3 鈥? 7%
Page 2 of 7
MATERIAL SAFETY DATA SHEET
Tapmatic庐 Edge Lube
Revision 3 Revision Date 7/30/08 Supercedes: 1/31/03
Section 4 鈥? First Aid Measures
Check for and remove contact lenses. If irritation or redness develops, flush eyes with cool, clean, low
Eyes:
pressure water for at least 15 minutes. Hold eyelids apart to ensure complete irrigation of the eye and eyelid
tissue. Do not use eye ointment. Seek medical attention immediately.
Remove contaminated shoes and clothing. Clean affected area thoroughly with mild soap and water. Do not
Skin:
use ointments. Seek medical attention if irritation persists.
Immediately move victim to fresh air. If victim is not breathing, immediately begin rescue breathing. If heart
Inhalation:
has stopped, immediately begin cardiopulmonary resuscitation (CPR). If breathing is difficult, seek medical
attention immediately.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
Ingestion:
unconscious person. If spontaneous vomiting is about to occur, place victim鈥檚 head below knees. If victim is
drowsy or unconscious, place on the left side with head down. Do not leave victim unattended. Seek medical
attention immediately.
Section 5 鈥? Fire Fighting Measures
Products of Combustion: Carbon monoxide and carbon dioxide.
Firefighting media: SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Cool containing vessels with water jet in order to
prevent pressure build-up, auto ignition or explosions.
Sensitivity to Impact: None.
Sensitivity to Static Discharge: None
Protection Clothing (Fire): Firefighters must use full bunker gear including NIOSH-approved positive pressure self-
contained breathing apparatus to protect against potential hazardous combustion or decomposition products and oxygen
deficiencies. Evacuate area and fight the fire from a maximum distance or use unmanned hose holders or monitor
nozzles.
Special Remarks on Explosion Hazards: None.
Section 6 鈥? Accidental Release Measures
Contain and recover spilled liquid when possible.
Containment
Procedures
Absorb with an inert material and dispose of properly.
Clean-Up Procedures Small Spill and Leak:
Pick up free liquid for disposal using absorbent pads, sand, or
Large Spill and Leak:
other inert non-combustible absorbent materials. Place into
appropriate waste containers for later disposal.
Ventilate area of leak or spill. Keep unnecessary and unprotected people away.
Evacuation
Procedures
Ventilate area. Wear appropriate protective equipment during cleanup.
Special Procedures
Page 3 of 7
MATERIAL SAFETY DATA SHEET
Tapmatic庐 Edge Lube
Revision 3 Revision Date 7/30/08 Supercedes: 1/31/03
Section 7 鈥? Handling and Storage
Handling: Avoid contact with skin. Wash thoroughly after handling.
.
Storage: Keep containers sealed until ready for use. Avoid excessive long-term storage temperatures to prolong shelf life.
Keep container in a cool, well-ventilated area. Store below 120掳F.
Precautions to be taken in handling and storage: Store all materials in dry, well-ventilated area.
Section 8 鈥? Exposure Controls / Personal Protection
Exposure Guidelines:
OSHA ACGIH- NIOSH
Component CASRN OSHA STEL ACGIH-TLV
TWA-PEL STEL REL
Not Not Not Not
Not
Alcohols, C10-16,ethoxylated 68002-97-1 Established Established Established Established
Established
Provide general and/or local exhaust ventilation to keep exposures below the exposure
Engineering measures
guidelines.
Personal protective equipment
Safety glasses with side shields conforming to appropriate regulations. Eye wash
Eye protection
fountain and emergency shower facilities are recommended.
Normally no hand protection is required; however, using chemical resistant gloves (i.e.,
Hand protection
nitrile) is recommended.
Typical use of this product under normal conditions does not require the use of
Respiratory protection
respiratory protection. If necessary use NIOSH approved respiratory protection (i.e.,
organic vapor cartridge).
Wash throughly after handling. Have eye-wash facilities immediately available.
General Hygiene
Considerations
Section 9 鈥? Physical and Chemical Properties
Solid Off-white, light yellow
Appearance: Color:
Fatty Not Established
Odor/Taste: Vapor Pressure:
Slight solubility in water Nil
Solubility Description: Evaporation Rate:
Not Established 170掳C (338掳F)
Boiling Point: Flash Point (掳C):
0.82-0.84 @ 20 掳C Tag-Closed Cup.
Specific Gravity (Water=1): Flash Point Method:
Not Established Not Established
Vapor Density (air=1): Auto Ignition Temperature (掳C):
0 g/L per CARB/OTC <1
V.O.C. Content: Partition Coefficient (octanol/water):
Not Established
Flammable limits (estimated): Viscosity:
LOWER: NE
UPPER: NE
Not applicable Not Established
pH: Odor threshold:
Not Established 0%
Melting Point: Volatiles:
Not Established
Decomposition Temperature:
Page 4 of 7
MATERIAL SAFETY DATA SHEET
Tapmatic庐 Edge Lube
Revision 3 Revision Date 7/30/08 Supercedes: 1/31/03
Section 10 鈥? Stability and Reactivity
Product is stable under recommended storage conditions.
Chemical Stability:
None.
Conditions to Avoid:
Reactive or incompatible with oxidizing agents.
Incompatibility:
These products are strong acids, bases, and carbon oxides (CO, CO2).
Hazardous Decomposition:
Will not occur.
Hazardous Polymerization:
Section 11 鈥? Toxicological Information
Acute and Chronic Toxicity
A: General Product Information
An acute toxicity study of this product has not been conducted. Information given in this section relates only to individual
constituents contained in this preparation.
Ingredients CASRN LC-50 LD-50
Alcohols, C10-16,ethoxylated 68002-97-1 Not Established Not Established
Section 12 鈥? Ecological Information
Expected to partition to Biodegradable.
Mobility: Persistence and degradability:
sediment
None expected. Toxic to aquatic life.
Bioaccumulative Other adverse effects:
potential:
Ecotoxicity:
Component CASRN Test Species Results
Effect on Organisms
Alcohols, C10-
Acute Toxicity on Fishes 68002-97-1 96 hr LC50 Guppy 6.5 mg/L
16,ethoxylated
Alcohols, C10-
Acute Toxicity on Daphnia 68002-97-1 48 hr EC50 Daphnia Magna 2.32 mg/L
16,ethoxylated
No Data Available
Bacterial inhibition
Alcohols, C10- S. subspicatus
68002-97-1 72 hr EbC50 2.7 mg/L
Growth inhibition of algae
16,ethoxylated (algae)
No Data Available
Bioaccumulation in fish
Page 5 of 7
MATERIAL SAFETY DATA SHEET
Tapmatic庐 Edge Lube
Revision 3 Revision Date 7/30/08 Supercedes: 1/31/03
Section 13 鈥? Disposal Considerations
If discarded in its purchased form, this product is not a RCRA hazardous waste.
Waste Status:
Waste must be disposed of in accordance with federal, state, provincial, and local environmental
Disposal:
control regulations.
Chemical additions to, processing of, or otherwise altering this material may make this waste
Note:
management information inaccurate, incomplete, or otherwise inappropriate. Furthermore, state and
local waste disposal requirements may be more restrictive than federal laws and regulations.
Section 14 鈥? Transport Information
This product is not regulated under any mode of transportation.
Section 15 鈥? Regulatory Information
U.S. Federal Regulations
RCRA Hazardous Waste No.: None.
Comprehensive Environmental Response and Liability Act of 1980 (CERCLA): This product contains no Reportable
Quantity (RQ) Substances.
Toxic Substances Control Act (TSCA):
All components of this product are TSCA inventory listed and/or are exempt.
Superfund Amendments and Reauthorization Act (SARA) Title III
SARA Section 311/312 (40 CFR 370) Hazard Categories:
Immediate (Acute) Health Hazard
This product contains the following toxic chemical(s) subject to reporting requirements of SARA Section 313 (40
CFR 372): None
Section 112 Hazardous Air Pollutants (HAPs): None
State Regulations
California: This product does not contain chemical(s) known to the State of California to cause cancer, birth defects or
reproductive harm.
California and OTC States: This product is not regulated by consumer product regulations.
New Jersey Right to Know:
Stearyl Alcohol 112-92-5 鈼? Oleyl Alcohol 143-28-2 鈼? C10-16 Ethoxylated Alcohol 68002-97-1 鈼?
Page 6 of 7
MATERIAL SAFETY DATA SHEET
Tapmatic庐 Edge Lube
Revision 3 Revision Date 7/30/08 Supercedes: 1/31/03
International Regulations
Canadian Environmental Protection Act: All of the components of this product are included on the Canadian Domestic
Substances list (DSL).
Canadian Workplace Hazardous Materials Information System WHMIS:
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
WHMIS Classification:
Class D2B
Other Regulations
Montreal Protocol listed ingredients: None.
Stockholm Convention listed ingredients: None.
Rotterdam Convention listed ingredients: None.
RoHS Compliant: Yes.
Section 16 鈥? Other Information
NFPA
HMIS 1996 HMIS III
MSDS#143200 Flammability
Responsible Name:
1 [/]1
Health: Health:
Clea Johnson 0
Regulatory Affairs Coordinator 0 0 1
Flammability: Flammability: Reactivity
Health 0
0 0
Reactivity: Physical Hazard
Notice to Reader:
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its
subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of
suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with
caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
Clea L Johnson, Regulatory Affairs Coordinator
LPS Laboratories
A division of Illinois Tool Works
Page 7 of 7
|