MATERIAL SAFETY DATA SHEET
LPS庐 PF庐-400
Revision 3 Revision Date: 7/10/08 Supercedes:3/15/05
Section 1 鈥? Product and Company Identification
LPS庐 PF庐-400
Product Name:
62716, C62716
Part Number:
Isoparaffinic Hydrocarbon
Chemical Name:
An industrial grade solvent designed to remove contaminant particles from high voltage
Product Use:
cables.
LPS Laboratories, 4647 Hugh Howell Rd., Tucker, GA, USA 30084
Manufacturer Information:
1 770-243-8800
TEL:
1-800-424-9300 Chemtrec;
Emergency Telephone
Outside U.S.: (703) 527-3887
Number:
1 770-243-8899
FAX:
http://www.lpslabs.comU
Website: HH UU H
PLAIN LANGUAGE HAZARD SUMMARY
Material Safety Data Sheets can be confusing. Federal and State laws require us to include a great deal of technical
information that probably won鈥檛 help the non-professional. LPS includes this 鈥淧LAIN LANGUAGE HAZARD SUMMARY鈥? to
address the questions and concerns of the average worker. If you have additional health, safety or product questions, don鈥檛
hesitate to call us at 800/241-8334.
Worker Toxicity
An industrial grade spray solvent designed to remove contaminant particles from high voltage cables. It contains
isoparaffinic hydrocarbons that can be irritating to skin. We suggest you wear gloves and avoid extended exposure to
unprotected skin. Don鈥檛 get it in your eyes (it stings), or breath large amounts of the vapor, (it will dry out your nasal
passages and if you breathe large amounts in poorly ventilated areas it can make you dizzy and even sick). Don鈥檛 use
LPS庐 PF庐 -400 for extended periods without adequate ventilation. If you鈥檙e going to perform work involving a lot of product
in a poorly ventilated area, use of a respirator or even a self-contained breathing apparatus may be necessary. For more
exposure and first aid information, refer to MSDS Sections 2, 8 and 11.
Flammability
LPS庐 PF庐-400 is a flammable aerosol. Do not use on red-hot metal surfaces. Store product away from heat sources and
do not use on live electrical equipment.
Disposal
If you spill LPS庐 PF庐 -400, notify the proper environmental or safety department at your company right away. If LPS庐 PF庐 -
400 becomes contaminated with another substance and is rendered unusable for cleaning, the resulting mixture may fall
under at least one hazardous classification. See section 13.
Page 1 of 8
MATERIAL SAFETY DATA SHEET
LPS庐 PF庐-400
Revision 3 Revision Date: 7/10/08 Supercedes:3/15/05
Section 2 鈥? Hazards Identification
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
Emergency Overview:
Aerosol: DANGER: Flammable. Contents under Pressure. Harmful or fatal is swallowed.
Primary route(s) of entry: Skin and Eye contact. Inhalation.
Potential Acute Health Effects:
Irritating to eyes
Eyes
Repeated exposure may cause skin dryness or cracking.
Skin
Excessive inhalation of vapors can cause irritation of the respiratory tract, nausea, dizziness or headache.
Inhalation:
Product has a low order of acute oral toxicity, but ingestion of large quantities may cause nausea,
Ingestion:
vomiting, and gastrointestinal irritation. May cause injury if aspirated into lungs.
Potential Chronic Health Effects:
Carcinogenic Effects: NTP: No IARC: No OSHA: No
Mutagenic Effects: None
Teratogenic Effects: None
Medical conditions aggravated by exposure: Persons with pre-existing central nervous system (CNS) disease,
neurological conditions, skin disorders, chronic respiratory diseases, or impaired liver or kidney function should avoid
exposure.
Signs and Symptoms
Stinging in eyes. Repeated or prolonged skin contact can cause redness, irritation, and scaling of the skin (dermatitis).
Breathing of high vapor concentrations may cause headaches, stupor, irritation of throat and eyes, and kidney effects.
Section 3 鈥? Composition / Information on Ingredients
Component CASRN Percent by Weight
Aliphatic Hydrocarbon 64742-48-9 80 - 100%
Carbon Dioxide 124-38-9 2 - 4%
Page 2 of 8
MATERIAL SAFETY DATA SHEET
LPS庐 PF庐-400
Revision 3 Revision Date: 7/10/08 Supercedes:3/15/05
Section 4 鈥? First Aid Measures
Check for and remove contact lenses. If irritation or redness develops, flush eyes with cool, clean, low
Eyes:
pressure water for at least 15 minutes. Hold eyelids apart to ensure complete irrigation of the eye and
eyelid tissue. Do not use eye ointment. Seek medical attention immediately.
Remove contaminated shoes and clothing. Clean affected area thoroughly with mild soap and water. Do
Skin:
not use ointments. Seek medical attention if irritation persists.
Immediately move victim to fresh air. If victim is not breathing, immediately begin rescue breathing. If heart
Inhalation:
has stopped, immediately begin cardiopulmonary resuscitation (CPR). If breathing is difficult, seek medical
attention immediately.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to
Ingestion:
an unconscious person. If spontaneous vomiting is about to occur, place victim鈥檚 head below knees. If
victim is drowsy or unconscious, place on the left side with head down. Do not leave victim unattended.
Seek medical attention immediately.
Section 5 鈥? Fire Fighting Measures
Products of Combustion: Carbon monoxide and carbon dioxide. NFPA Class: IIIA Liquid
Firefighting media: SMALL FIRE: Use DRY chemical powder.
LARGE FIRE: Use water spray, fog or foam. Cool containing vessels with water jet in order to
prevent pressure build-up, autoignition or explosions.
Sensitivity to Impact: None. Sensitivity to Static Discharge: None.
Protection Clothing (Fire): Firefighters must use full bunker gear including NIOSH-approved positive pressure self-
contained breathing apparatus to protect against potential hazardous combustion or decomposition products and oxygen
deficiencies. Evacuate area and fight the fire from a maximum distance or use unmanned hose holders or monitor
nozzles.
Special Remarks on Explosion Hazards: High heat will cause product to boil, evolving vapor that could cause explosive
rupture of closed containers. Aerosols may explode upon heating, spread fire and overcome sprinkler systems.
Section 6 鈥? Accidental Release Measures
Contain and recover spilled liquid when possible.
Containment
Procedures
Absorb with an inert material and dispose of properly.
Clean-Up Procedures Small Spill and Leak:
Secure the area and control access. Dike far ahead of a liquid
Large Spill and Leak:
spill to ensure complete collection. Pick up free liquid for
disposal using absorbent pads, sand, or other inert non-
combustible absorbent materials. Place into appropriate waste
containers for later disposal.
Ventilate area of leak or spill. Keep unnecessary and unprotected people away.
Evacuation
Procedures
Remove all sources of ignition. Ventilate area. Wear appropriate protective equipment during
Special Procedures
cleanup.
Page 3 of 8
MATERIAL SAFETY DATA SHEET
LPS庐 PF庐-400
Revision 3 Revision Date: 7/10/08 Supercedes:3/15/05
Section 7 鈥? Handling and Storage
Handling: DO NOT spray into or around ignition sources. Do not allow material to come into contact with eyes or skin.
Wear appropriate protective equipment during handling. Keep container closed. Do not breathe vapors or mists. Use only
with adequate ventilation. Wash thoroughly after handling.
Storage: Keep container in a cool, well-ventilated area. Avoid all sources of ignition (spark or flame). Store below 120掳F.
Precautions to be taken in handling and storage: Store aerosols as Level 3 Aerosol (NFPA 30B). Store all materials in
dry, well-ventilated area. Avoid breathing vapors.
Section 8 鈥? Exposure Controls / Personal Protection
Exposure Guidelines:
OSHA
Component CASRN OSHA STEL ACGIH-TLV ACGIH-STEL NIOSH REL
TWA-PEL
Not Not Not Not
Aliphatic Hydrocarbon 64742-48-9 171 ppm* Established Established Established Established
Not 5000ppm
Carbon Dioxide 5,000 ppm 5,000 ppm 30,000 ppm
124-38-9
Established 3000 ppm STEL
* Supplier Recommendation
Provide general and/or local exhaust ventilation to keep exposures below the exposure guidelines
Engineering measures
listed above.
Personal protective equipment
Safety glasses with side shields conforming to appropriate regulations. Eye wash fountain and
Eye protection
emergency shower facilities are recommended.
Normally no hand protection is required; however, if product will be sprayed for an extended period,
Hand protection
鈥渙verspray鈥? onto skin may occur. If so, use chemical resistant gloves (i.e., nitrile) conforming to
appropriate regulations. Please observe the instructions regarding permeability and breakthrough
time that are provided by the supplier of the gloves.
Typical use of this product under normal conditions does not require the use of respiratory
Respiratory protection
protection. If airborne concentrations are above the applicable exposure limits (listed above),
use NIOSH approved respiratory protection (i.e., organic vapor cartridge).
Wash throughly after handling. Have eye-wash facilities immediately available.
General Hygiene
Considerations
Page 4 of 8
MATERIAL SAFETY DATA SHEET
LPS庐 PF庐-400
Revision 3 Revision Date: 7/10/08 Supercedes:3/15/05
Section 9 鈥? Physical and Chemical Properties
Liquid. Clear/Colorless
Appearance: Color:
o
No Odor 0.49mmHg (0.064kPa) at 20 C
Odor/Taste: Vapor Pressure:
Insoluble in cold water 0.1 (BuAc=1)
Solubility Description: Evaporation Rate:
掳 o
185掳C(365 F) -211掳C(412掳F) >61掳C (142 F)
Boiling Point: Flash Point:
@ 760mmHg
0.74-0.78 @ 20 掳C Tag-Closed Cup.
Specific Gravity (Water=1): Flash Point Method:
5.6 at 101kPa Not Established
Vapor Density (air=1): Auto Ignition
Temperature (掳C):
97%, 749 g/L, 6.26#/gal. Not Established
V.O.C. Content: Partition Coefficient
Per C.A.R.B / O.T.C. and (octanol/water):
S.C.A.Q.M.D. Rule 102
LOWER: 0.7% 100%
Flammable limits (estimated): Volatiles:
UPPER: 5.3%
o
>260掳C (500掳F)
1.99 cSt at 25 C
Viscosity: Auto Ignition
Temperature (掳C):
Not applicable
pH:
Section 10 鈥? Stability and Reactivity
Product is stable under recommended storage conditions.
Chemical Stability:
Keep away from heat and ignition sources.
Conditions to Avoid:
Reactive or incompatible with oxidizing agents.
Incompatibility:
These products are carbon oxides ( CO, CO2)
Hazardous Decomposition:
Will not occur.
Hazardous Polymerization:
Section 11 鈥? Toxicological Information
A: General Product Information
An acute toxicity study of this product has not been conducted. Information given in this section relates only to individual
constituents contained in this preparation.
Page 5 of 8
MATERIAL SAFETY DATA SHEET
LPS PF 141IG Industrial Grade Solvent
Revision 3 Revision Date: 7/10/08 Supercedes:3/15/05
B: Component Analysis
Component CASRN LC-50 LD-50
>10000 mg/kg oral*
Aliphatic Hydrocarbon 64742-48-9 Not established
>3160 mg/kg dermal*
Carbon Dioxide 124-38-9 Not Available Not Appropriate
* Supplier data
Section 12 鈥? Ecological Information
Volatile. Not expected to partition to Readily biodegradable
Mobility: Persistence and
sediment. degradability:
No bioaccumulation potential None known.
Bioaccumulative Other adverse effects:
potential:
Ecotoxicology:
Effect on
Component CASRN Test Species Results
Organisms
Acute Toxicity on
Fishes
Acute Toxicity on
Daphnia
No Data Available
Bacterial inhibition
Growth inhibition of
algae
Bioaccumulation in
fish
Section 13 鈥? Disposal Considerations
Aerosol products, if depressurized and emptied to less than 2.5 cm of fluid contents are classified as
Waste Status:
non-hazardous waste under 40 CFR 261.7 (U.S.). This product, if disposed of in its received form
carries waste codes D003 (aerosol only) (U.S.).
Waste must be disposed of in accordance with federal, state, provincial, and local environmental
Disposal:
control regulations.
Chemical additions to, processing of, or otherwise altering this material may make this waste
Note:
management information inaccurate, incomplete, or otherwise inappropriate. Furthermore, state and
local waste disposal requirements may be more restrictive than federal laws and regulations.
Page 6 of 8
MATERIAL SAFETY DATA SHEET
LPS PF 141IG Industrial Grade Solvent
Revision 3 Revision Date: 7/10/08 Supercedes:3/15/05
Section 14 鈥? Transport Information
ORM-D NA
Shipping Name: UN Number:
D.O.T. Ground
NA NA
Hazard Class: Technical Name:
ORM-D
NA
Subclass: Hazard Label:
Already on box
1950 2
UN no: ADR Class:
NA 5F
Packing group: Classification code:
Road/Rail -
ADR/RID Name and
AEROSOLS, Flammable NA
Hazard ID no:
Description:
2.1
Labeling:
1950 2.1
UN no: Class:
AEROSOLS 2.1
Shipping Name: Subsidiary Risk:
IMDG-IMO
Packing
P003, LP02 NA
Packing group:
Instructions:
NO F-D, S-U
Marine pollutant: EmS:
1950 2.1
UN no: Class:
AEROSOLS, Flammable NA
Shipping Name: Subclass
IATA-ICAO
Packing
Y203 NA
Packing group:
instructions:
Flammable Gas
Labeling:
Section 15 鈥? Regulatory information
U.S. Federal Regulations
RCRA Hazardous Waste No.: D003 (aerosol)
Comprehensive Environmental Response and Liability Act of 1980 (CERCLA): None
Toxic Substances Control Act (TSCA):
All components of this product are TSCA inventory listed and/or are exempt.
Superfund Amendments and Reauthorization Act (SARA) Title III
SARA Section 311/312 (40 CFR 370) Hazard Categories:
Sudden Release of Pressure
This product contains the following toxic chemical(s) subject to reporting requirements of SARA Section 313 (40
CFR 372):No individual section 313 component is present at or above 1%
Section 112 Hazardous Air Pollutants (HAPs): None
Page 7 of 8
MATERIAL SAFETY DATA SHEET
LPS PF 141IG Industrial Grade Solvent
Revision 3 Revision Date: 7/10/08 Supercedes:3/15/05
State Regulations
New Jersey RTK: Aliphatic Hydrocarbon 64742-48-9 鈼? Carbon Dioxide 124-38-9
California: This product does not contain chemical(s) known to the State of California to cause cancer, birth defects or
reproductive harm.
International Regulations
Canadian Environmental Protection Act: All of the components of this product are included on the Canadian Domestic
Substances list (DSL).
Canadian Workplace Hazardous Materials Information System (WHMIS):
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the
MSDS contains all the information required by the Controlled Products Regulations.
WHMIS Classification:
Class B3, Class D2B
Other Regulations
Montreal Protocol listed ingredients: None.
Stockholm Convention listed ingredients: None.
Rotterdam Convention listed ingredients: None.
RoHS Compliant: Yes.
Section 16 鈥? Other Information
HMIS 1996 HMIS III NFPA
MSDS# 162716
Health: 1 Health: [/]1 Flammability
Responsible Name:
Clea Johnson
Flammability: 2 Flammability: 2
Regulatory Affairs Coordinator 2
1
Health Reactivity
0
Reactivity 0 Physical Hazard: 2
Notice to Reader:
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier
nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained
herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee
that these are the only hazards that exist.
Clea Johnson, Regulatory Affairs Coordinator
LPS Laboratories, A division of Illinois Tool Works
Page 8 of 8
|