MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 1 of 9
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
SYNONYMS
Manfacturer's Code: C2100
PRODUCT USE
Cleaning agent.
SUPPLIER
Company: Meguiar's Australia P/L
Address:
35 Slough Business Park
Holker St, Silverwater
NSW, 2128
AUS
Telephone: +61 2 9737 9422
Telephone: 1800 804 182
Fax: +61 2 9737 9414
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. According to the
Criteria of NOHSC, and the ADG Code.
POISONS SCHEDULE
None
RISK
Irritating to eyes.
SAFETY
Do not breathe dust.
Wear eye/face protection.
Use only in well ventilated areas.
Keep container in a well ventilated place.
To clean the floor and all objects contaminated by this material, use water and
detergent.
Take off immediately all contaminated clothing.
In case of contact with eyes, rinse with plenty of water and contact Doctor or
Poisons Information Centre.
If swallowed, IMMEDIATELY contact Doctor or Poisons Information Centre. (show
this container or label).
If you feel unwell contact Doctor or Poisons Information Centre. (Show the label
if possible).
continued...
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 2 of 9
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
NAME CAS RN %
calcium carbonate 471-34-1 40-60
silica fused 60676-86-0 10-30
2-butene homopolymer - polybutene 9003-29-6 20-40
conditioners proprietary <5
Section 4 - FIRST AID MEASURES
SWALLOWED
- Immediately give a glass of water.
- First aid is not generally required. If in doubt, contact a Poisons
Information Centre or a doctor.
EYE
If this product comes in contact with the eyes:
- Wash out immediately with fresh running water.
- Ensure complete irrigation of the eye by keeping eyelids apart and away from
eye and moving the eyelids by occasionally lifting the upper and lower lids.
- If pain persists or recurs seek medical attention.
- Removal of contact lenses after an eye injury should only be undertaken by
skilled personnel.
SKIN
If skin contact occurs:
- Immediately remove all contaminated clothing, including footwear
- Flush skin and hair with running water (and soap if available).
- Seek medical attention in event of irritation.
INHALED
- If fumes or combustion products are inhaled remove from contaminated area.
- Lay patient down. Keep warm and rested.
- Prostheses such as false teeth, which may block airway, should be removed,
where possible, prior to initiating first aid procedures.
- Apply artificial respiration if not breathing, preferably with a demand valve
resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if
necessary.
- Transport to hospital, or doctor.
NOTES TO PHYSICIAN
Treat symptomatically.
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
- There is no restriction on the type of extinguisher which may be used.
Use extinguishing media suitable for surrounding area.
FIRE FIGHTING
- Alert Fire Brigade and tell them location and nature of hazard.
- Wear breathing apparatus plus protective gloves for fire only.
continued...
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 3 of 9
Section 5 - FIRE FIGHTING MEASURES
- Prevent, by any means available, spillage from entering drains or water
courses.
- Use fire fighting procedures suitable for surrounding area.
- DO NOT approach containers suspected to be hot.
- Cool fire exposed containers with water spray from a protected location.
- If safe to do so, remove containers from path of fire.
- Equipment should be thoroughly decontaminated after use.
FIRE/EXPLOSION HAZARD
- Solid which exhibits difficult combustion or is difficult to ignite.
- Avoid generating dust, particularly clouds of dust in a confined or
unventilated space as dusts may form an explosive mixture with air, and any
source of ignition, i.e. flame or spark, will cause fire or explosion. Dust
clouds generated by the fine grinding of the solid are a particular hazard;
accumulations of fine dust may burn rapidly and fiercely if ignited
- Dry dust can also be charged electrostatically by turbulence, pneumatic
transport, pouring, in exhaust ducts and during transport.
- Build-up of electrostatic charge may be prevented by bonding and grounding.
- Powder handling equipment such as dust collectors, dryers and mills may
require additional protection measures such as explosion venting.
Decomposition may produce toxic fumes of, carbon dioxide (CO2), other pyrolysis
products typical of burning organic material.
May emit poisonous fumes.
May emit corrosive fumes.
FIRE INCOMPATIBILITY
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids,
chlorine bleaches, pool chlorine etc. as ignition may result.
HAZCHEM
None
Personal Protective Equipment
PERSONAL PROTECTION EQUIPMENT
Gloves, boots (chemical resistant).
Breathing apparatus.
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
- Remove all ignition sources.
- Clean up all spills immediately.
- Avoid contact with skin and eyes.
- Control personal contact by using protective equipment.
- Use dry clean up procedures and avoid generating dust.
- Place in a suitable labelled container for waste disposal.
MAJOR SPILLS
Moderate hazard.
- CAUTION: Advise personnel in area.
- Alert Emergency Services and tell them location and nature of hazard.
- Control personal contact by wearing protective clothing.
continued...
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 4 of 9
Section 6 - ACCIDENTAL RELEASE MEASURES
- Prevent, by any means available, spillage from entering drains or water
courses.
- Recover product wherever possible.
- IF DRY: Use dry clean up procedures and avoid generating dust. Collect
residues and place in sealed plastic bags or other containers for disposal. IF
WET: Vacuum/shovel up and place in labelled containers for disposal.
- ALWAYS: Wash area down with large amounts of water and prevent runoff into
drains.
- If contamination of drains or waterways occurs, advise Emergency Services.
EMERGENCY RESPONSE PLANNING GUIDELINES (ERPG)
The maximum airborne concentration below which it is believed that nearly all
individuals could be exposed for up to one hour WITHOUT experiencing or developing
life-threatening health effects is:
calcium carbonate 500 mg/m鲁
irreversible or other serious effects or symptoms which could
impair an individual's ability to take protective action is:
calcium carbonate 50 mg/m鲁
other than mild, transient adverse effects
without perceiving a clearly defined odour is:
calcium carbonate 30 mg/m鲁
The threshold concentration below which most people.
will experience no appreciable risk of health effects:
calcium carbonate 15 mg/m鲁
American Industrial Hygiene Association (AIHA)
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
- Avoid all personal contact, including inhalation.
- Wear protective clothing when risk of exposure occurs.
- Use in a well-ventilated area.
- Prevent concentration in hollows and sumps.
- DO NOT enter confined spaces until atmosphere has been checked.
- DO NOT allow material to contact humans, exposed food or food utensils.
- Avoid contact with incompatible materials.
- When handling, DO NOT eat, drink or smoke.
- Keep containers securely sealed when not in use.
- Avoid physical damage to containers.
- Always wash hands with soap and water after handling.
- Work clothes should be laundered separately. Launder contaminated clothing
before re-use.
- Use good occupational work practice.
- Observe manufacturer's storing and handling recommendations.
- Atmosphere should be regularly checked against established exposure standards
to ensure safe working conditions are maintained.
continued...
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 5 of 9
Section 7 - HANDLING AND STORAGE
SUITABLE CONTAINER
- Polyethylene or polypropylene container.
- Check all containers are clearly labelled and free from leaks.
STORAGE INCOMPATIBILITY
Avoid reaction with oxidising agents.
STORAGE REQUIREMENTS
Observe manufacturer's storing and handling recommendations.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
No data available for calcium carbonate as (CAS: 471-34-1) / (CAS: 13397-26-7) / (CAS: 15634-14-7)
No data available for 2-butene homopolymer - polybutene as (CAS: 9003-29-6)
Not available. Refer to individual constituents.
INGREDIENT DATA
CALCIUM CARBONATE:
The TLV-TWA is thought to be protective against the significant risk of
physical irritation associated with exposure.
SILICA FUSED:
The concentration of respirable dust for application of this limit is to be
determined from the fraction that penetrates a separator whose size collection
efficiency is described by a cumulative lognormal function with a median
aerodynamic diameter of 4.0 碌m (+-) 0.3 碌m and with a geometric standard
deviation of 1.5 碌m (+-) 0.1 碌m, i.e..generally less than 5 碌m.
Little is known about the health effects of fused silica. Animal studies
indicate the possible association between exposure and fibrosis. NIOSH
considers fused amorphous silica to be an occupational carcinogen.
Since X-ray diffraction cannot be used for quantitative analysis of
amorphous fused silica, a simple gravimetric analysis of all dust
containing fused silica must be relied upon.
2-BUTENE HOMOPOLYMER - POLYBUTENE:
No exposure limits set by NOHSC or ACGIH.
PERSONAL PROTECTION
EYE
- Safety glasses with side shields.
- Chemical goggles.
- Contact lenses pose a special hazard; soft lenses may absorb irritants and all
lenses concentrate them. DO NOT wear contact lenses.
HANDS/FEET
Wear chemical protective gloves, eg. PVC.
Wear safety footwear or safety gumboots, eg. Rubber.
OTHER
- Overalls.
- P.V.C. apron.
- Barrier cream.
continued...
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 6 of 9
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
- Skin cleansing cream.
- Eye wash unit.
The local concentration of material, quantity and conditions of use determine
the type of personal protective equipment required. For further information
consult site specific CHEMWATCH data (if available), or your Occupational
Health and Safety Advisor.
ENGINEERING CONTROLS
Local exhaust ventilation usually required. If risk of overexposure exists, wear
approved respirator. Correct fit is essential to obtain adequate protection.
Supplied-air type respirator may be required in special circumstances. Correct
fit is essential to ensure adequate protection.
An approved self contained breathing apparatus (SCBA) may be required in some
situations.
Provide adequate ventilation in warehouse or closed storage area.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Red clay solid with a slight odour; small portion on or near surface will
dissolve in water during use.
PHYSICAL PROPERTIES
Solid.
Molecular Weight: Not Applicable Boiling Range (掳C): Not Available
Melting Range (掳C): Not Available Specific Gravity (water=1): 2 approx.
Solubility in water (g/L): Partly Miscible pH (as supplied): 7
pH (1% solution): Not Available Vapour Pressure (kPa): Not Available
Volatile Component (%vol): Not Available Evaporation Rate: Not Applicable
Relative Vapour Density (air=1): Not Applicable Flash Point (掳C): Not Applicable
Lower Explosive Limit (%): Not Available Upper Explosive Limit (%): Not Available
Autoignition Temp (掳C): Not Available Decomposition Temp (掳C): Not Available
State: Solid
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
- Presence of incompatible materials.
- Product is considered stable.
- Hazardous polymerisation will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS
continued...
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 7 of 9
Section 11 - TOXICOLOGICAL INFORMATION
SWALLOWED
The material has NOT been classified by EC Directives or other classification
systems as "harmful by ingestion". This is because of the lack of corroborating
animal or human evidence. The material may still be damaging to the health of
the individual, following ingestion, especially where pre-existing organ (e.g
liver, kidney) damage is evident. Present definitions of harmful or toxic
substances are generally based on doses producing mortality rather than those
producing morbidity (disease, ill-health). Gastrointestinal tract discomfort may
produce nausea and vomiting. In an occupational setting however, ingestion of
insignificant quantities is not thought to be cause for concern.
EYE
The dust may produce eye discomfort and abrasive eye inflammation.
The material may produce severe irritation to the eye causing pronounced
inflammation. Repeated or prolonged exposure to irritants may produce
conjunctivitis.
SKIN
Skin contact is not thought to have harmful health effects (as classified under
EC Directives); the material may still produce health damage following entry
through wounds, lesions or abrasions.
Entry into the blood-stream, through, for example, cuts, abrasions or lesions,
may produce systemic injury with harmful effects. Examine the skin prior to the
use of the material and ensure that any external damage is suitably protected.
The material may cause skin irritation after prolonged or repeated exposure and
may produce a contact dermatitis (nonallergic). This form of dermatitis is often
characterised by skin redness (erythema) and swelling the epidermis.
Histologically there may be intercellular oedema of the spongy layer
(spongiosis) and intracellular oedema of the epidermis.
INHALED
Inhalation of dusts, generated by the material during the course of normal
handling, may be damaging to the health of the individual.
The material is not thought to produce respiratory irritation (as classified by
EC Directives using animal models). Nevertheless inhalation of dusts, or fumes,
especially for prolonged periods, may produce respiratory discomfort and
occasionally, distress.
Effects on lungs are significantly enhanced in the presence of respirable
particles. Overexposure to respirable dust may produce wheezing, coughing and
breathing difficulties leading to or symptomatic of impaired respiratory
function.
CHRONIC HEALTH EFFECTS
Long-term exposure to the product is not thought to produce chronic effects
adverse to health (as classified by EC Directives using animal models);
nevertheless exposure by all routes should be minimised as a matter of course.
TOXICITY AND IRRITATION
Not available. Refer to individual constituents.
unless otherwise specified data extracted from RTECS - Register of Toxic Effects
of Chemical Substances
CALCIUM CARBONATE:
TOXICITY IRRITATION
Oral (rat) LD50: 6450 mg/kg Skin (rabbit): 500 mg/24h-Moderate
Eye (rabbit): 0.75 mg/24h - SEVERE
continued...
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 8 of 9
Section 11 - TOXICOLOGICAL INFORMATION
No evidence of carcinogenic properties. No evidence of mutagenic or
teratogenic effects.
SILICA FUSED:
TOXICITY IRRITATION
Inhalation (rat) TCLo: 197 mg/m3/6H/26W-I
2-BUTENE HOMOPOLYMER - POLYBUTENE:
TOXICITY IRRITATION
Inhalation (rat) TCLo: 700 mg/m3/7H/2W-I Nil Reported
Section 12 - ECOLOGICAL INFORMATION
DO NOT discharge into sewer or waterways.
DO NOT discharge into sewer or waterways.
Refer to data for ingredients, which follows:
Section 13 - DISPOSAL CONSIDERATIONS
Puncture containers to prevent re-use and bury at an authorised landfill.
- Recycle wherever possible.
- Consult manufacturer for recycling options or consult local or regional waste
management authority for disposal if no suitable treatment or disposal facility
can be identified.
- Dispose of by: Burial in a licenced land-fill or Incineration in a licenced
apparatus (after admixture with suitable combustible material)
- Decontaminate empty containers. Observe all label safeguards until containers
are cleaned and destroyed.
Section 14 - TRANSPORTATION INFORMATION
Dangerous Goods Class: None
Subrisk: None
UN/NA Number: None
Packing Group: None
Labels Required:
Additional Shipping Information:
International Transport Regulations:
IMO Dangerous Goods class: None
IMO Packing group: None
IATA Dangerous goods class: None
Cargo Instructions:
Cargo Max:
Passenger Instructions:
Passenger Max:
Special Provisions: None, None
HAZCHEM
None
continued...
MEGUIAR'S C2100 - PROFESSIONAL DETAILING CLAY (AGGRESSIVE)
Chemwatch Material Safety Data Sheet CHEMWATCH 4829-43
Issue Date: Wed 27-Jul-2005 CD 2005/2 Page 9 of 9
Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE
None
REGULATIONS
calcium carbonate (CAS: 471-34-1) is found on the following regulatory lists:
Australia High Volume Industrial Chemical List (HVICL)
Australian Inventory of Chemical Substances (AICS)
silica fused (CAS: 60676-86-0) is found on the following regulatory lists:
Australian Inventory of Chemical Substances (AICS)
2-butene homopolymer - polybutene (CAS: 9003-29-6) is found on the following
regulatory lists:
Australian Inventory of Chemical Substances (AICS)
No data available for calcium carbonate as CAS: 13397-26-7, CAS: 15634-14-7.
Section 16 - OTHER INFORMATION
This document is copyright. Apart from any fair dealing for the purposes of
private study, research, review or criticism, as permitted under the Copyright
Act, no part may be reproduced by any process without written permission from
CHEMWATCH. TEL (+61 3) 9572 4700.
Issue Date: Wed 27-Jul-2005
Print Date: Wed 27-Jul-2005
|