MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 1 of 12
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
MEGUIAR'S G118 - COLORX
SYNONYMS
"Manufacturer's Code: G118"
PRODUCT USE
Used according to manufacturer's directions.
SUPPLIER
Company: Meguiar's Australia P/L
Address:
35 Slough Business Park
Holker St, Silverwater
NSW, 2128
AUS
Telephone: +61 2 9737 9422
Telephone: 1800 804 182
Fax: +61 2 9737 9414
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. According to the
Criteria of NOHSC, and the ADG Code.
POISONS SCHEDULE
None
RISK
In use, may form flammable/ explosive vapour-air mixture.
HARMFUL-May cause lung damage if swallowed.
SAFETY
Do not breathe gas/fumes/vapour/spray.
Avoid contact with eyes.
Wear suitable protective clothing.
Use only in well ventilated areas.
Keep container in a well ventilated place.
To clean the floor and all objects contaminated by this material, use water and
detergent.
Keep container tightly closed.
Keep away from food, drink and animal feeding stuffs.
Take off immediately all contaminated clothing.
In case of contact with eyes, rinse with plenty of water and contact Doctor or
Poisons Information Centre.
If swallowed, IMMEDIATELY contact Doctor or Poisons Information Centre. (show
this container or label).
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 2 of 12
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
NAME CAS RN %
kaolin 1332-58-7 5-15
naphtha petroleum, isoparaffin, hydrotreated 64742-48-9. 10-25
Section 4 - FIRST AID MEASURES
SWALLOWED
If spontaneous vomiting appears imminent or occurs, hold patient's head down,
lower than their hips to help avoid possible aspiration of vomitus.
- If swallowed do NOT induce vomiting.
- If vomiting occurs, lean patient forward or place on left side (head-down
position, if possible) to maintain open airway and prevent aspiration.
- Observe the patient carefully.
- Never give liquid to a person showing signs of being sleepy or with reduced
awareness; i.e. becoming unconscious.
- Give water to rinse out mouth, then provide liquid slowly and as much as
casualty can comfortably drink.
- Seek medical advice.
Avoid giving milk or oils.
Avoid giving alcohol.
EYE
If this product comes in contact with the eyes:
- Wash out immediately with fresh running water.
- Ensure complete irrigation of the eye by keeping eyelids apart and away from
eye and moving the eyelids by occasionally lifting the upper and lower lids.
- If pain persists or recurs seek medical attention.
- Removal of contact lenses after an eye injury should only be undertaken by
skilled personnel.
SKIN
If skin contact occurs:
- Immediately remove all contaminated clothing, including footwear
- Flush skin and hair with running water (and soap if available).
- Seek medical attention in event of irritation.
INHALED
- If fumes or combustion products are inhaled remove from contaminated area.
- Lay patient down. Keep warm and rested.
- Prostheses such as false teeth, which may block airway, should be removed,
where possible, prior to initiating first aid procedures.
- Apply artificial respiration if not breathing, preferably with a demand valve
resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if
necessary.
- Transport to hospital, or doctor.
NOTES TO PHYSICIAN
Any material aspirated during vomiting may produce lung injury. Therefore emesis
should not be induced mechanically or pharmacologically. Mechanical means should
be used if it is considered necessary to evacuate the stomach contents; these
include gastric lavage after endotracheal intubation. If spontaneous vomiting
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 3 of 12
Section 4 - FIRST AID MEASURES
has occurred after ingestion, the patient should be monitored for difficult
breathing, as adverse effects of aspiration into the lungs may be delayed up to
48 hours.
For acute or short term repeated exposures to petroleum distillates or related
hydrocarbons:
- Primary threat to life, from pure petroleum distillate ingestion and/or
inhalation, is respiratory failure.
- Patients should be quickly evaluated for signs of respiratory distress (e.g.
cyanosis, tachypnoea, intercostal retraction, obtundation) and given oxygen.
Patients with inadequate tidal volumes or poor arterial blood gases (pO2 50 mm
Hg) should be intubated.
- Arrhythmias complicate some hydrocarbon ingestion and/or inhalation and
electrocardiographic evidence of myocardial injury has been reported;
intravenous lines and cardiac monitors should be established in obviously
symptomatic patients. The lungs excrete inhaled solvents, so that
hyperventilation improves clearance.
- A chest x-ray should be taken immediately after stabilisation of breathing and
circulation to document aspiration and detect the presence of pneumothorax.
- Epinephrine (adrenalin) is not recommended for treatment of bronchospasm
because of potential myocardial sensitisation to catecholamines. Inhaled
cardioselective bronchodilators (e.g. Alupent, Salbutamol) are the preferred
agents, with aminophylline a second choice.
- Lavage is indicated in patients who require decontamination; ensure use of
cuffed endotracheal tube in adult patients. [Ellenhorn and Barceloux: Medical
Toxicology].
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
- Foam.
- Dry chemical powder.
- BCF (where regulations permit).
- Carbon dioxide.
- Water spray or fog - Large fires only.
FIRE FIGHTING
- Alert Fire Brigade and tell them location and nature of hazard.
- Wear full body protective clothing with breathing apparatus.
- Prevent, by any means available, spillage from entering drains or water
course.
- Use water delivered as a fine spray to control fire and cool adjacent area.
- Avoid spraying water onto liquid pools.
- DO NOT approach containers suspected to be hot.
- Cool fire exposed containers with water spray from a protected location.
- If safe to do so, remove containers from path of fire.
FIRE/EXPLOSION HAZARD
- Combustible.
- Slight fire hazard when exposed to heat or flame.
- Heating may cause expansion or decomposition leading to violent rupture of
containers.
- On combustion, may emit toxic fumes of carbon monoxide (CO).
- May emit acrid smoke.
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 4 of 12
Section 5 - FIRE FIGHTING MEASURES
- Mists containing combustible materials may be explosive.
Combustion products include, carbon dioxide (CO2), other pyrolysis products
typical of burning organic material.
May emit poisonous fumes.
May emit corrosive fumes.
FIRE INCOMPATIBILITY
Avoid contamination with oxidising agents i.e. nitrates, oxidising acids,
chlorine bleaches, pool chlorine etc. as ignition may result.
HAZCHEM
None
Personal Protective Equipment
Breathing apparatus.
Chemical splash suit.
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
- Remove all ignition sources.
- Clean up all spills immediately.
- Avoid breathing vapours and contact with skin and eyes.
- Control personal contact by using protective equipment.
- Contain and absorb spill with sand, earth, inert material or vermiculite.
- Wipe up.
- Place in a suitable labelled container for waste disposal.
MAJOR SPILLS
Moderate hazard.
- Clear area of personnel and move upwind.
- Alert Fire Brigade and tell them location and nature of hazard.
- Wear breathing apparatus plus protective gloves.
- Prevent, by any means available, spillage from entering drains or water
course.
- No smoking, naked lights or ignition sources.
- Increase ventilation.
- Stop leak if safe to do so.
- Contain spill with sand, earth or vermiculite.
- Collect recoverable product into labelled containers for recycling.
- Absorb remaining product with sand, earth or vermiculite.
- Collect solid residues and seal in labelled drums for disposal.
- Wash area and prevent runoff into drains.
- If contamination of drains or waterways occurs, advise emergency services.
EMERGENCY RESPONSE PLANNING GUIDELINES (ERPG)
The maximum airborne concentration below which it is believed that nearly all
individuals could be exposed for up to one hour WITHOUT experiencing or developing
life-threatening health effects is:
kaolin 500 mg/m鲁
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 5 of 12
Section 6 - ACCIDENTAL RELEASE MEASURES
naphtha petroleum, isoparaffin, hydrotreated 500 mg/m鲁
irreversible or other serious effects or symptoms which could
impair an individual's ability to take protective action is:
kaolin 100 mg/m鲁
naphtha petroleum, isoparaffin, hydrotreated 100 mg/m鲁
other than mild, transient adverse effects
without perceiving a clearly defined odour is:
kaolin 6 mg/m鲁
naphtha petroleum, isoparaffin, hydrotreated 6 mg/m鲁
The threshold concentration below which most people.
will experience no appreciable risk of health effects:
kaolin 5 mg/m鲁
naphtha petroleum, isoparaffin, hydrotreated 5 mg/m鲁
American Industrial Hygiene Association (AIHA)
Ingredients considered according to the following cutoffs
Very Toxic (T+) >= 0.1% Toxic (T) >= 3.0%
R50 >= 0.25% Corrosive (C) >= 5.0%
R51 >= 2.5%
else >= 10%
where percentage is percentage of ingredient found in the mixture
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
- Containers, even those that have been emptied, may contain explosive vapours.
- Do NOT cut, drill, grind, weld or perform similar operations on or near
containers.
- Electrostatic discharge may be generated during pumping - this may result in
fire.
- Ensure electrical continuity by bonding and grounding (earthing) all
equipment.
- Restrict line velocity during pumping in order to avoid generation of
electrostatic discharge (<=1 m/sec until fill pipe submerged to twice its
diameter, then <= 7 m/sec).
- Avoid splash filling.
- Do NOT use compressed air for filling discharging or handling operations.
- Avoid all personal contact, including inhalation.
- Wear protective clothing when risk of exposure occurs.
- Use in a well-ventilated area.
- Prevent concentration in hollows and sumps.
- DO NOT enter confined spaces until atmosphere has been checked.
- Avoid smoking, naked lights or ignition sources.
- Avoid contact with incompatible materials.
- When handling, DO NOT eat, drink or smoke.
- Keep containers securely sealed when not in use.
- Avoid physical damage to containers.
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 6 of 12
Section 7 - HANDLING AND STORAGE
- Always wash hands with soap and water after handling.
- Work clothes should be laundered separately.
- Use good occupational work practice.
- Observe manufacturer's storing and handling recommendations.
- Atmosphere should be regularly checked against established exposure standards
to ensure safe working conditions.
SUITABLE CONTAINER
- Metal can or drum
- Packaging as recommended by manufacturer.
- Check all containers are clearly labelled and free from leaks.
STORAGE INCOMPATIBILITY
Avoid reaction with oxidising agents.
STORAGE REQUIREMENTS
- Store in original containers.
- Keep containers securely sealed.
- No smoking, naked lights or ignition sources.
- Store in a cool, dry, well-ventilated area.
- Store away from incompatible materials and foodstuff containers.
- Protect containers against physical damage and check regularly for leaks.
- Observe manufacturer's storing and handling recommendations.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
Source Material TWA TWA STEL STEL Peak Peak
ppm mg/m鲁 ppm mg/m鲁 ppm mg/m鲁
_________________________ ________________ _____ _____ _____ _____ _____ _____
Australia Exposure Kaolin (a) 10
Standards
No data available: naphtha petroleum, isoparaffin, hydrotreated as (CAS: 64742-48-9)
No data for Meguiar's G118 - Colorx.
INGREDIENT DATA
KAOLIN:
Kaolin dust appears to have fibrogenic potential even in the absence of
crystalline silica. Kaolinosis can exist as simple and complicated forms
with the latter often associated with respiratory symptoms. Crystalline
silica enhances the severity of the pneumoconiosis.
NAPHTHA PETROLEUM, ISOPARAFFIN, HYDROTREATED:
No exposure limits set by NOHSC or ACGIH.
REL TWA: 400 ppm [EXXON]
for petroleum distillates:
CEL TWA: 500 ppm, 2000 mg/m鲁 (compare OSHA TWA).
PERSONAL PROTECTION
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 7 of 12
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EYE
- Safety glasses with side shields.
- Chemical goggles.
- Contact lenses may pose a special hazard; soft contact lenses may absorb and
concentrate irritants. A written policy document, describing the wearing of lens
or restrictions on use, should be created for each workplace or task. This
should include a review of lens absorption and adsorption for the class of
chemicals in use and an account of injury experience. Medical and first-aid
personnel should be trained in their removal and suitable equipment should be
readily available. In the event of chemical exposure, begin eye irrigation
immediately and remove contact lens as soon as practicable. Lens should be
removed at the first signs of eye redness or irritation - lens should be removed
in a clean environment only after workers have washed hands thoroughly. [CDC
NIOSH Current Intelligence Bulletin 59].
HANDS/FEET
Suitability and durability of glove type is dependent on usage. Factors such a:
- frequency and duration of contact,
- chemical resistance of glove material,
- glove thickness and
- dexterity,
are important in the selection of gloves.
Wear chemical protective gloves, eg. PVC.
Wear safety footwear or safety gumboots, eg. Rubber.
OTHER
- Overalls.
- P.V.C. apron.
- Barrier cream.
- Skin cleansing cream.
- Eye wash unit.
RESPIRATOR
Selection of the Class and Type of respirator will depend upon the level of
breathing zone contaminant and the chemical nature of the contaminant.
Protection Factors (defined as the ratio of contaminant outside and inside the
mask) may also be important.
Breathing Zone Maximum Half-face Full-Face
Level ppm Protection Factor Respirator Respirator
(volume)
1000 10 A-AUS -
1000 50 - A-AUS
5000 50 Airline * -
5000 100 - A-2
10000 100 - A-3
100+ Airline**
* - Continuous Flow ** - Continuous-flow or positive pressure demand.
The local concentration of material, quantity and
conditions of use determine the type of personal
protective equipment required.
For further information consult site specific
CHEMWATCH data (if available), or your
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 8 of 12
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Occupational Health and Safety Advisor.
ENGINEERING CONTROLS
Local exhaust ventilation usually required. If risk of overexposure exists, wear
approved respirator. Correct fit is essential to obtain adequate protection.
Supplied-air type respirator may be required in special circumstances. Correct
fit is essential to ensure adequate protection.
An approved self contained breathing apparatus (SCBA) may be required in some
situations.
Provide adequate ventilation in warehouse or closed storage area.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Blue liquid with a pleasant odour; moderately soluble in water.
PHYSICAL PROPERTIES
Liquid.
Molecular Weight: Not Applicable Boiling Range (C): 199
Melting Range (C): Not Available Specific Gravity (water=1): 1.0
Solubility in water (g/L): Partly Miscible pH (as supplied): 9
pH (1% solution): Not Available Vapour Pressure (kPa): Not Available
Volatile Component (%vol): 24 (VOC) Evaporation Rate: <1
Relative Vapour Density (air=1): >1 Flash Point (C): 93 (PMCC)
Lower Explosive Limit (%): Not Available Upper Explosive Limit (%): Not Available
Autoignition Temp (C): Not Available Decomposition Temp (掳C): Not Available
State: Liquid Viscosity: Not Applicable
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
- Presence of incompatible materials.
- Product is considered stable.
- Hazardous polymerisation will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS
SWALLOWED
Accidental ingestion of the material may be damaging to the health of the
individual.
Considered an unlikely route of entry in commercial/industrial environments The
liquid may produce considerable gastrointestinal discomfort and may be harmful
or toxic if swallowed. Ingestion may result in nausea, pain and vomiting. Vomit
entering the lungs by aspiration may cause potentially lethal chemical
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 9 of 12
Section 11 - TOXICOLOGICAL INFORMATION
pneumonitis.
EYE
Limited evidence exists, or practical experience suggests, that the material may
cause eye irritation in a substantial number of individuals and/or is expected
to produce significant ocular lesions which are present twenty-four hours or
more after instillation into the eye(s) of experimental animals. Repeated or
prolonged eye contact may cause inflammation characterised by temporary redness
(similar to windburn) of the conjunctiva (conjunctivitis);
temporary impairment of vision and/or other transient eye damage/ulceration may
occur.
Petroleum hydrocarbons may produce pain after direct contact with the eyes.
Slight, but transient disturbances of the corneal epithelium may also result.
The aromatic fraction may produce irritation and lachrymation.
SKIN
Skin contact with the material may damage the health of the individual; systemic
effects may result following absorption.
The liquid may be miscible with fats or oils and may degrease the skin,
producing a skin reaction described as non-allergic contact dermatitis. The
material is unlikely to produce an irritant dermatitis as described in EC
Directives .
Repeated exposure may cause skin cracking, flaking or drying following normal
handling and use.
Entry into the blood-stream, through, for example, cuts, abrasions or lesions,
may produce systemic injury with harmful effects. Examine the skin prior to the
use of the material and ensure that any external damage is suitably protected.
INHALED
Inhalation of vapours or aerosols (mists, fumes), generated by the material
during the course of normal handling, may be damaging to the health of the
individual.
Limited evidence or practical experience suggests that the material may produce
irritation of the respiratory system, in a significant number of individuals,
following inhalation. In contrast to most organs, the lung is able to respond to
a chemical insult by first removing or neutralising the irritant and then
repairing the damage. The repair process, which initially evolved to protect
mammalian lungs from foreign matter and antigens, may however, produce further
lung damage resulting in the impairment of gas exchange, the primary function of
the lungs. Respiratory tract irritation often results in an inflammatory
response involving the recruitment and activation of many cell types, mainly
derived from the vascular system.
Acute effects from inhalation of high concentrations of vapour are pulmonary
irritation, including coughing, with nausea; central nervous system depression -
characterised by headache and dizziness, increased reaction time, fatigue and
loss of co-ordination.
Central nervous system (CNS) depression may include nonspecific discomfort,
symptoms of giddiness, headache, dizziness, nausea, anaesthetic effects, slowed
reaction time, slurred speech and may progress to unconsciousness. Serious
poisonings may result in respiratory depression and may be fatal.
If exposure to highly concentrated solvent atmosphere is prolonged this may lead
to narcosis, unconsciousness, even coma and possible death.
Inhalation of vapours may cause drowsiness and dizziness. This may be
accompanied by narcosis, reduced alertness, loss of reflexes, lack of
coordination and vertigo.
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 10 of 12
Section 11 - TOXICOLOGICAL INFORMATION
The use of a quantity of material in an unventilated or confined space may
result in increased exposure and an irritating atmosphere developing.
Before starting consider control of exposure by mechanical ventilation.
CHRONIC HEALTH EFFECTS
Limited evidence suggests that repeated or long-term occupational exposure may
produce cumulative health effects involving organs or biochemical systems.
Repeated or prolonged exposure to mixed hydrocarbons may produce narcosis with
dizziness, weakness, irritability, concentration and/or memory loss, tremor in
the fingers and tongue, vertigo, olfactory disorders, constriction of visual
field, paraesthesias of the extremities, weight loss and anaemia and
degenerative changes in the liver and kidney. Chronic exposure by petroleum
workers, to the lighter hydrocarbons, has been associated with visual
disturbances, damage to the central nervous system, peripheral neuropathies
(including numbness and paraesthesias), psychological and neurophysiological
deficits, bone marrow toxicities (including hypoplasia possibly due to benzene)
and hepatic and renal involvement. Chronic dermal exposure to petroleum
hydrocarbons may result in defatting which produces localised dermatoses.
Surface cracking and erosion may also increase susceptibility to infection by
microorganisms. One epidemiological study of petroleum refinery workers has
reported elevations in standard mortality ratios for skin cancer along with a
dose-response relationship indicating an association between routine workplace
exposure to petroleum or one of its constituents and skin cancer, particularly
melanoma. Other studies have been unable to confirm this finding.
TOXICITY AND IRRITATION
Not available. Refer to individual constituents.
unless otherwise specified data extracted from RTECS - Register of Toxic Effects
of Chemical Substances
KAOLIN:
No significant acute toxicological data identified in literature search.
NAPHTHA PETROLEUM, ISOPARAFFIN, HYDROTREATED:
No significant acute toxicological data identified in literature search.
Section 12 - ECOLOGICAL INFORMATION
The lower molecular weight hydrocarbons are expected to form a "slick" on the
surface of waters after release in calm sea conditions. This is expected to
evaporate and enter the atmosphere where it will be degraded through reaction
with hydroxy radicals.
Some of the material will become associated with benthic sediments, and it is
likely to be spread over a fairly wide area of sea floor. Marine sediments may
be either aerobic or anaerobic. The material, in probability, is biodegradable,
under aerobic conditions (isomerised olefins and alkenes show variable results).
Evidence also suggests that the hydrocarbons may be degradable under anaerobic
conditions although such degradation in benthic sediments may be a relatively
slow process.
Under aerobic conditions the material will degrade to water and carbon dioxide,
while under anaerobic processes it will produce water, methane and carbon
dioxide.
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 11 of 12
Section 12 - ECOLOGICAL INFORMATION
Based on test results, as well as theoretical considerations, the potential for
bioaccumulation may be high. Toxic effects are often observed in species such as
blue mussel, daphnia, freshwater green algae, marine copepods and amphipods.
Drinking Water Standards:
hydrocarbon total: 10 ug/l (UK max.).
DO NOT discharge into sewer or waterways.
Refer to data for ingredients, which follows:
NAPHTHA PETROLEUM, ISOPARAFFIN, HYDROTREATED:
DO NOT discharge into sewer or waterways.
Section 13 - DISPOSAL CONSIDERATIONS
- Recycle wherever possible or consult manufacturer for recycling options.
- Consult State Land Waste Authority for disposal.
- Bury or incinerate residue at an approved site.
- Recycle containers if possible, or dispose of in an authorised landfill.
Section 14 - TRANSPORTATION INFORMATION
HAZCHEM
None
NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS:UN,IATA,IMDG
Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE
None
REGULATIONS
kaolin (CAS: 1332-58-7) is found on the following regulatory lists;
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
OECD Representative List of High Production Volume (HPV) Chemicals
naphtha petroleum, isoparaffin, hydrotreated (CAS: 64742-48-9) is found on the
following regulatory lists;
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
Australia Poisons Schedule
International Council of Chemical Associations (ICCA) - High Production Volume
List
OECD Representative List of High Production Volume (HPV) Chemicals
continued...
MEGUIAR'S G118 - COLORX
Chemwatch Material Safety Data Sheet
Issue Date: 6-Jun-2006 CHEMWATCH 4835-96
CD 2006/1 Page 12 of 12
Section 16 - OTHER INFORMATION
This document is copyright. Apart from any fair dealing for the purposes of
private study, research, review or criticism, as permitted under the Copyright
Act, no part may be reproduced by any process without written permission from
CHEMWATCH. TEL (+61 3) 9572 4700.
Issue Date: 6-Jun-2006
Print Date: 6-Jun-2006
|