MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 1 of 12
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
SYNONYMS
"Manufacturer's Code: G7410"
PRODUCT USE
Endurance tire protectant.
SUPPLIER
Company: Meguiar' s Australia Pty Ltd
Address:
35 Slough Business Park
Holker St, Silverwater
NSW, 2128
AUS
Telephone: +61 2 9737 9422
Telephone: 1800 804 182
Fax: +61 2 9737 9414
Section 2 - HAZARDS IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE
HAZARDOUS SUBSTANCE. NON-DANGEROUS GOODS. According to the Criteria of
NOHSC, and the ADG Code.
POISONS SCHEDULE
None
RISK SAFETY
HARMFUL- May cause lung damage if swallowed. Do not breathe gas/fumes/vapour/spray.
Avoid contact with eyes.
Wear suitable protective clothing.
Use only in well ventilated areas.
Keep container in a well ventilated place.
To clean the floor and all objects contaminated
by this material, use water.
Keep container tightly closed.
Keep away from food, drink and animal feeding
stuffs.
Take off immediately all contaminated clothing.
In case of contact with eyes, rinse with plenty
of water and contact Doctor or Poisons
Information Centre.
If swallowed, IMMEDIATELY contact Doctor or
Poisons Information Centre. (show this container
or label).
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 2 of 12
Section 3 - COMPOSITION / INFORMATION ON INGREDIENTS
NAME CAS RN %
polydimethylsiloxane 63148-62-9 30-50
distillates, petroleum, middle, hydrotreated 64742-46-7. 10-30
dipropylene glycol monomethyl ether acetate 88917-22-0 1-5
resin system proprietary 1-5
conditioners proprietary 1-5
2, 2, 4- trimethyl- 1, 3- pentanediol monoisobutyrate 25265-77-4 0.5-2
N, N' , N" - tris[4- ((1, 4- 121246-28-4 0.1-1
dimethylpentyl)amino)phenyl]melamine
Section 4 - FIRST AID MEASURES
SWALLOWED
- If swallowed do NOT induce vomiting.
- If vomiting occurs, lean patient forward or place on left side (head-down position, if
possible) to maintain open airway and prevent aspiration.
- Observe the patient carefully.
- Never give liquid to a person showing signs of being sleepy or with reduced awareness;
i.e. becoming unconscious.
- Give water to rinse out mouth, then provide liquid slowly and as much as casualty can
comfortably drink.
- Seek medical advice.
EYE
If this product comes in contact with the eyes:
- Wash out immediately with fresh running water.
- Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and
moving the eyelids by occasionally lifting the upper and lower lids.
- If pain persists or recurs seek medical attention.
- Removal of contact lenses after an eye injury should only be undertaken by skilled
personnel.
SKIN
If skin or hair contact occurs:
- Flush skin and hair with running water (and soap if available).
- Seek medical attention in event of irritation.
INHALED
- If fumes or combustion products are inhaled remove from contaminated area.
- Lay patient down. Keep warm and rested.
- Prostheses such as false teeth, which may block airway, should be removed, where
possible, prior to initiating first aid procedures.
- Apply artificial respiration if not breathing, preferably with a demand valve
resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary.
- Transport to hospital, or doctor.
NOTES TO PHYSICIAN
Treat symptomatically.
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 3 of 12
Section 5 - FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA
- Foam.
- Dry chemical powder.
- BCF (where regulations permit).
- Carbon dioxide.
- Water spray or fog - Large fires only.
FIRE FIGHTING
- Alert Fire Brigade and tell them location and nature of hazard.
- Wear breathing apparatus plus protective gloves.
- Prevent, by any means available, spillage from entering drains or water course.
- Use water delivered as a fine spray to control fire and cool adjacent area.
- Avoid spraying water onto liquid pools.
- Do not approach containers suspected to be hot.
- Cool fire exposed containers with water spray from a protected location.
- If safe to do so, remove containers from path of fire.
FIRE/EXPLOSION HAZARD
- Combustible.
- Slight fire hazard when exposed to heat or flame.
- Heating may cause expansion or decomposition leading to violent rupture of containers.
- On combustion, may emit toxic fumes of carbon monoxide (CO).
- May emit acrid smoke.
- Mists containing combustible materials may be explosive.
Other decomposition products include: carbon dioxide (CO2) and silicon dioxide (SiO2).
FIRE INCOMPATIBILITY
Avoid contamination with strong oxidising agents as ignition may result.
HAZCHEM: None
Personal Protective Equipment
Chemical splash suit.
Section 6 - ACCIDENTAL RELEASE MEASURES
EMERGENCY PROCEDURES
MINOR SPILLS
Slippery when spilt.
Remove all ignition sources.
- Clean up all spills immediately.
- Avoid breathing vapours and contact with skin and eyes.
- Control personal contact by using protective equipment.
- Contain and absorb spill with sand, earth, inert material or vermiculite.
- Wipe up.
- Place in a suitable labelled container for waste disposal.
MAJOR SPILLS
Slippery when spilt.
Remove all ignition sources.
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 4 of 12
Section 6 - ACCIDENTAL RELEASE MEASURES
Minor hazard.
- Clear area of personnel.
- Alert Fire Brigade and tell them location and nature of hazard.
- Control personal contact by using protective equipment as required.
- Prevent spillage from entering drains or water ways.
- Contain spill with sand, earth or vermiculite.
- Collect recoverable product into labelled containers for recycling.
- Absorb remaining product with sand, earth or vermiculite and place in appropriate
containers for disposal.
- Wash area and prevent runoff into drains or waterways.
- If contamination of drains or waterways occurs, advise emergency services.
EMERGENCY RESPONSE PLANNING GUIDELINES (ERPG)
The maximum airborne concentration below which it is believed that nearly all individuals could be exposed
for up to one hour WITHOUT experiencing or developing
life-threatening health effects is:
polydimethylsiloxane 250 mg/m鲁
distillates, petroleum, middle, hydrotreated 500 mg/m鲁
irreversible or other serious effects or symptoms which could impair an individual's ability to take
protective action is:
polydimethylsiloxane 50 mg/m鲁
distillates, petroleum, middle, hydrotreated 400 mg/m鲁
other than mild, transient adverse effects without perceiving a clearly defined odour is:
polydimethylsiloxane 30 mg/m鲁
distillates, petroleum, middle, hydrotreated 60 mg/m鲁
The threshold concentration below which most people will experience no appreciable risk of health effects:
polydimethylsiloxane 10 mg/m鲁
distillates, petroleum, middle, hydrotreated 20 mg/m鲁
American Industrial Hygiene Association (AIHA)
Ingredients considered according to the following cutoffs
Very Toxic (T+) >= 0.1% Toxic (T) >= 3.0%
R50 >= 0.25% Corrosive (C) >= 5.0%
R51 >= 2.5%
else >= 10%
where percentage is percentage of ingredient found in the mixture
Personal Protective Equipment advice is contained in Section 8 of the MSDS.
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
- Avoid all personal contact, including inhalation.
- Wear protective clothing when risk of exposure occurs.
- Use in a well-ventilated area.
- Prevent concentration in hollows and sumps.
- DO NOT enter confined spaces until atmosphere has been checked.
- Avoid smoking, naked lights or ignition sources.
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 5 of 12
Section 7 - HANDLING AND STORAGE
- Avoid contact with incompatible materials.
- When handling, DO NOT eat, drink or smoke.
- Keep containers securely sealed when not in use.
- Avoid physical damage to containers.
- Always wash hands with soap and water after handling.
- Work clothes should be laundered separately.
- Use good occupational work practice.
- Observe manufacturer's storing and handling recommendations.
- Atmosphere should be regularly checked against established exposure standards to
ensure safe working conditions.
SUITABLE CONTAINER
- Lined metal can, Lined metal pail/ can
- Plastic pail
- Polyliner drum
- Packing as recommended by manufacturer.
- Check all containers are clearly labelled and free from leaks.
STORAGE INCOMPATIBILITY
Avoid storage with oxidisers and acids.
STORAGE REQUIREMENTS
- Store in original containers.
- Keep containers securely sealed.
- No smoking, naked lights or ignition sources.
- Store in a cool, dry, well-ventilated area.
- Store away from incompatible materials and foodstuff containers.
- Protect containers against physical damage and check regularly for leaks.
- Observe manufacturer's storing and handling recommendations.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
Source Material TWA TWA STEL STEL Peak Peak TWA
ppm mg/m鲁 ppm mg/m鲁 ppm mg/m鲁 F/CC
_________________ __________________ ______ ______ ______ ______ ______ ______ ______
Australia Exposure distillates, 5
Standards petroleum, middle,
hydrotreated (Oil
mist, refined
mineral)
Australia Exposure N, N' , N" - 10
Standards tris[4- ((1, 4-
dimethylpentyl)ami
no)phenyl]melamine
(Inspirable dust
(Not specified))
The following materials had no OELs on our records
鈥? polydimethylsiloxane: CAS:63148-62-9
鈥? dipropylene glycol monomethyl ether acetate: CAS:88917-22-0
鈥? 2,2,4-trimethyl-1,3-pentanediol monoisobutyrate: CAS:25265-77-4 CAS:77-68-9
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 6 of 12
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
MATERIAL DATA
None assigned. Refer to individual constituents.
INGREDIENT DATA
2,2,4-TRIMETHYL-1,3-PENTANEDIOL MONOISOBUTYRATE:
DIPROPYLENE GLYCOL MONOMETHYL ETHER ACETATE:
POLYDIMETHYLSILOXANE:
No exposure limits set by NOHSC or ACGIH.
POLYDIMETHYLSILOXANE:
DISTILLATES, PETROLEUM, MIDDLE, HYDROTREATED:
Human exposure to oil mist alone has not been demonstrated to cause health effects
except at levels above 5 mg/m3 (this applies to particulates sampled by a method that
does not collect vapour). It is not advisable to apply this standard to oils containing
unknown concentrations and types of additive.
DIPROPYLENE GLYCOL MONOMETHYL ETHER ACETATE:
2,2,4-TRIMETHYL-1,3-PENTANEDIOL MONOISOBUTYRATE:
N,N',N"-TRIS[4-((1,4-DIMETHYLPENTYL)AMINO)PHENYL]MELAMINE:
These "dusts" have little adverse effect on the lungs and do not produce toxic effects
or organic disease. Although there is no dust which does not evoke some cellular response
at sufficiently high concentrations, the cellular response caused by P.N.O.C.s has the
following characteristics:
- the architecture of the air spaces remain intact,
- scar tissue (collagen) is not synthesised to any degree,
- tissue reaction is potentially reversible.
Extensive concentrations of P.N.O.C.s may:
- seriously reduce visibility,
- cause unpleasant deposits in the eyes, ears and nasal passages,
- contribute to skin or mucous membrane injury by chemical or mechanical action, per
se, or by the rigorous skin cleansing procedures necessary for their removal. [ACGIH]
This limit does not apply:
- to brief exposures to higher concentrations
- nor does it apply to those substances that may cause physiological impairment at
lower concentrations but for which a TLV has as yet to be determined.
This exposure standard applies to particles which
- are insoluble or poorly soluble* in water or, preferably, in aqueous lung fluid (if
data is available) and
- have a low toxicity (i.e.. are not cytotoxic, genotoxic, or otherwise chemically
reactive with lung tissue, and do not emit ionizing radiation, cause immune sensitization
, or cause toxic effects other than by inflammation or by a mechanism of lung overload).
PERSONAL PROTECTION
EYE
- Safety glasses with side shields; or as required,
- Chemical goggles.
- Contact lenses may pose a special hazard; soft contact lenses may absorb and
concentrate irritants. A written policy document, describing the wearing of lens or
restrictions on use, should be created for each workplace or task. This should include a
review of lens absorption and adsorption for the class of chemicals in use and an account
of injury experience. Medical and first-aid personnel should be trained in their removal
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 7 of 12
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
and suitable equipment should be readily available. In the event of chemical exposure,
begin eye irrigation immediately and remove contact lens as soon as practicable. Lens
should be removed at the first signs of eye redness or irritation - lens should be
removed in a clean environment only after workers have washed hands thoroughly. [CDC
NIOSH Current Intelligence Bulletin 59].
HANDS/FEET
Wear chemical protective gloves. eg. PVC gloves with barrier cream
Wear safety footwear.
OTHER
- Overalls.
- Eyewash unit.
RESPIRATOR
Selection of the Class and Type of respirator will depend upon the level of breathing
zone contaminant and the chemical nature of the contaminant. Protection Factors (defined
as the ratio of contaminant outside and inside the mask) may also be important.
Breathing Zone Level Maximum Protection Half- face Respirator Full- Face Respirator
ppm (volume) Factor
1000 10 A- AUS P -
1000 50 - A- AUS P
5000 50 Airline * -
5000 100 - A- 2 P
10000 100 - A- 3 P
100+ Airline**
* - Continuous Flow ** - Continuous-flow or positive pressure demand.
The local concentration of material, quantity and conditions of use determine the type of
personal protective equipment required.
For further information consult site specific
CHEMWATCH data (if available), or your
Occupational Health and Safety Advisor.
ENGINEERING CONTROLS
Use in a well-ventilated area.
General exhaust is adequate under normal operating conditions. If risk of overexposure
exists, wear SAA approved respirator. Correct fit is essential to obtain adequate
protection. Provide adequate ventilation in warehouse or closed storage areas.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE
Purple homogenous gel with a sweet odour; mixes with water.
PHYSICAL PROPERTIES
Liquid.
Mixes with water.
Molecular Weight: Not Applicable Boiling Range (掳C): 100
Melting Range (掳C): Not available Specific Gravity (water=1): 1.00
Solubility in water (g/L): Miscible pH (as supplied): 8.0
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 8 of 12
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
pH (1% solution): Not Available Vapour Pressure (kPa): 3.19 @ 21C
Volatile Component (%vol): Not Available Evaporation Rate: <1
Relative Vapour Density (air=1): >1 Flash Point (掳C): 100
Lower Explosive Limit (%): Not Available Upper Explosive Limit (%): Not Available
Autoignition Temp (掳C): Not Available Decomposition Temp (掳C): Not Available
State: Liquid Viscosity: Not Available
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
Product is considered stable and hazardous polymerisation will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS
SWALLOWED
Considered an unlikely route of entry in commercial/industrial environments.
The liquid is discomforting to the gastro-intestinal tract and may be harmful if
swallowed in large quantity.
Ingestion may result in nausea, abdominal irritation, pain and vomiting.
EYE
The liquid is highly discomforting to the eyes and is capable of causing a mild,
temporary redness of the conjunctiva (similar to wind-burn), temporary impairment of
vision and/ or other transient eye damage/ ulceration.
The vapour is mildly discomforting to the eyes.
The material may be irritating to the eye, with prolonged contact causing inflammation.
Repeated or prolonged exposure to irritants may produce conjunctivitis.
SKIN
The liquid is mildly discomforting to the skin and is capable of causing skin reactions
which may lead to dermatitis.
Toxic effects may result from skin absorption.
The material may accentuate any pre-existing skin condition.
INHALED
Not normally a hazard due to non-volatile nature of product.
The vapour is discomforting to the upper respiratory tract and lungs.
Inhalation of vapour is more likely at higher than normal temperatures.
Acute effects from inhalation of high vapour concentrations may be chest and nasal
irritation with coughing, sneezing, headache and even nausea.
CHRONIC HEALTH EFFECTS
Principal routes of exposure are by accidental skin and eye contact and by inhalation of
vapours especially at higher temperatures.
Prolonged or continuous skin contact with the liquid may cause defatting with drying,
cracking, irritation and dermatitis following.
As with any chemical product, contact with unprotected bare skin; inhalation of vapour,
mist or dust in work place atmosphere; or ingestion in any form, should be avoided by
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 9 of 12
Section 11 - TOXICOLOGICAL INFORMATION
observing good occupational work practice.
TOXICITY AND IRRITATION
Not available. Refer to individual constituents.
POLYDIMETHYLSILOXANE:
TOXICITY IRRITATION
Inhalation (rat) LC50: >1100 mg/m鲁* Eye (rabbit): 100 mg/1h - Mild
Oral (rat) LD50: >35000 mg/kg*
Dermal (rabbit) LD50: >3000 mg/kg*
The material may be irritating to the eye, with prolonged contact causing inflammation.
Repeated or prolonged exposure to irritants may produce conjunctivitis.
No toxic response noted during 90 day subchronic inhalation toxicity
studies
The no observable effect level is 450 mg/m鲁.
Non-irritating and non-sensitising in human patch test. [Xerox]*
DISTILLATES, PETROLEUM, MIDDLE, HYDROTREATED:
TOXICITY IRRITATION
typical for isoparaffinic hydrocarbons:
Inhalation (rat) LC50: 3400 ppm/4H None reported
[EXXON]
Oral (rat) LD50
: >8000 mg/kg
[CCINFO-Shell]
DIPROPYLENE GLYCOL MONOMETHYL ETHER ACETATE:
TOXICITY IRRITATION
Oral (rat) LD50: >5000 mg/kg*
Dermal (rabbit) LD50: >5000 mg/kg* *[Alpha Metals]
2,2,4-TRIMETHYL-1,3-PENTANEDIOL MONOISOBUTYRATE:
TOXICITY IRRITATION
Oral (rat) LD50: 3200 mg/kg Skin - Slight Irritant *
Oral (rat) LD50: 3200 mg/kg *** Skin (rabbit): Mild ***
Dermal (rabbit) LD50: > 16 ml/kg * Eyes - Moderate Irritant *
Dermal (g.pig) LD50: >16 ml/kg ***
Inhalation (rat) LC50: >3.55 mg/l/6h
Inhalation (rat) LC50: 1600 mg/kg *** Eye (rabbit): Mild ***
Skin sensitisation (guinea pig): none. *
Not a skin sensitiser (guinea pig, Magnusson-Kligman) ***
Ames Test: negative ***
Micronucleus, mouse: negative ***
Not mutagenic ***
No effects on fertility or foetal development seen in the rat ***
* [SWIFT]
** [Eastman]
*** [Perstop]
N,N',N"-TRIS[4-((1,4-DIMETHYLPENTYL)AMINO)PHENYL]MELAMINE:
No significant acute toxicological data identified in literature search.
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 10 of 12
Section 12 - ECOLOGICAL INFORMATION
No data for Meguiar's G7410 - Endurance Tire Protectant.
Refer to data for ingredients, which follows:
POLYDIMETHYLSILOXANE:
Fish LC50 (96hr.) (mg/l): 10000
2,2,4-TRIMETHYL-1,3-PENTANEDIOL MONOISOBUTYRATE:
log Kow 3.54
Potential for bioaccumulation but not considered as significant due to
ready biodegradability.
Degradation
BOD28/ ThOD 88.7% (Test method) OECD 301 C
Readily biodegradable
Atmospheric residence time: T(OH)=403 hrs.
Ecotoxicology:
Aquatic toxicity:
Fish LC50 (96 h): fathead minnow, 33 mg/l, NOEC: 16mg/l
sideswimmer, >95 mg/l (highest concentration tested)
Fish LC50 (96 h): oncorhynchus mykiss, >19 mg/l *
Daphnia magna EC50, (48 h): >19 mg/l *
Chaetgammarus marinus EC50 (96 h): 40 mg/l (seawater, 15 C.) *
Algae EC50 (72 h): 15 mg/l *
Daphnia EC50 (48h): 147.8 mg/l, NOEC: 28.4 mg/l
Pill bug LC50 (96h): >95 mg/l (highest concentration tested)
Flatworm LC50 (96h): 38 mg/l, NOEC: 9.5 mg/l
Aquatic earthworm LC50 (96 h): 30.4 mg/l, NOEC: 9.5 mg/l
Ramshorn snail LC50 (96h): >95 mg/l (highest concentration tested)
Selenastrum capricornutum EC50 (72 h): 18.4 mg/l
COD: 2.2 g/g
BOD: 2.4 g/g Eastman
* Perstop
WGK=1 (weakly water endangering)
WGK: Classification in accordance with German Water Resources Act.
Section 13 - DISPOSAL CONSIDERATIONS
- Recycle wherever possible or consult manufacturer for recycling options.
- Consult State Land Waste Management Authority for disposal.
- Bury residue in an authorised landfill.
- Recycle containers if possible, or dispose of in an authorised landfill.
Section 14 - TRANSPORTATION INFORMATION
HAZCHEM: None
NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS:UN, IATA,
IMDG
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 11 of 12
Section 15 - REGULATORY INFORMATION
POISONS SCHEDULE: None
REGULATIONS
polydimethylsiloxane (CAS: 63148-62-9) is found on the following regulatory lists;
Australia - Australia New Zealand Food Standards Code - Food Additives - Schedule 2
Miscellaneous additives permitted in accordance with GMP in processed foods specified in
Schedule 1
Australia - Australia New Zealand Food Standards Code - Processing Aids - Permitted
antifoam agents
Australia Inventory of Chemical Substances (AICS)
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule
4
IMO MARPOL 73/78 (Annex II) - List of Other Liquid Substances
OECD Representative List of High Production Volume (HPV) Chemicals
distillates, petroleum, middle, hydrotreated (CAS: 64742-46-7) is found on the following
regulatory lists;
Australia Exposure Standards
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
Australia Poisons Schedule
International Council of Chemical Associations (ICCA) - High Production Volume List
OECD Representative List of High Production Volume (HPV) Chemicals
dipropylene glycol monomethyl ether acetate (CAS: 88917-22-0) is found on the following
regulatory lists;
Australia Inventory of Chemical Substances (AICS)
Australia Standard for the Uniform Scheduling of Drugs and Poisons (SUSDP) - Schedule
6
International Council of Chemical Associations (ICCA) - High Production Volume List
OECD Representative List of High Production Volume (HPV) Chemicals
2,2,4-trimethyl-1,3-pentanediol monoisobutyrate (CAS: 25265-77-4) is found on the
following regulatory lists;
Australia High Volume Industrial Chemical List (HVICL)
Australia Inventory of Chemical Substances (AICS)
IMO MARPOL 73/78 (Annex II) - List of Noxious Liquid Substances Carried in Bulk
OECD Representative List of High Production Volume (HPV) Chemicals
2,2,4-trimethyl-1,3-pentanediol monoisobutyrate (CAS: 77-68-9) is found on the following
regulatory lists;
Australia Inventory of Chemical Substances (AICS)
N,N',N"-tris[4-((1,4-dimethylpentyl)amino)phenyl]melamine (CAS: 121246-28-4) is found on
the following regulatory lists;
Australia Exposure Standards
Australia Inventory of Chemical Substances (AICS)
continued...
MEGUIAR'S G7410 - ENDURANCE TIRE PROTECTANT
Chemwatch Material Safety Data Sheet
Issue Date: 18-Nov-2006 CHEMWATCH 4804-83
NA317EC CD 2006/4 Page 12 of 12
Section 16 - OTHER INFORMATION
INGREDIENTS WITH MULTIPLE CAS NUMBERS
Ingredient Name CAS
2, 2, 4- trimethyl- 25265- 77- 4, 77- 68- 9
1, 3- pentanediol
monoisobutyrate
This document is copyright. Apart from any fair dealing for the purposes of private study, research, review or
criticism, as permitted under the Copyright Act, no part may be reproduced by any process without written permission
from CHEMWATCH. TEL (+61 3) 9572 4700.
Issue Date: 18-Nov-2006
Print Date: 11-Dec-2006
|