Material Safety Data Sheet
Petroleum/Plant Based Wax Blend
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
________________________________________________________________________
PRODUCT NAME: ASTORLITE J300
OTHER/GENERIC NAMES: None
PRODUCT USE: Multiple uses.
MANUFACTURER: Candlewic
8244 Easton Rd
Ottsville, PA 18941
____________________________________________________________________
2. COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENT NAME CAS # WEIGHT %
Proprietary, non-hazardous ingredients Not Applicable 100
Trace impurities and additional material names not listed above may also appear in the Regulatory Information section (#15) towards
the end of the MSDS. These materials may be listed for local "Right to Know" compliance and for other reasons.
________________________________________________________________________
3. HAZARDS IDENTIFICATION
________________________________________________________________________
EMERGENCY OVERVIEW: The product is a light yellow slab with waxy odor. Exposure to
fumes from melting operations may cause irritation. Contact with molten material will cause thermal
burns. No other significant immediate health, physical or environmental hazards are associated with
these materials.
POTENTIAL HEALTH HAZARDS:
SKIN: Prolonged or repeated contact may cause irritation. Contact with molten material will cause thermal burns.
________________________________________________________________________
MSDS Number: WB0029a Page 1 of 7
Current Issue Date: 04/02
Material Safety Data Sheet
Petroleum/Plant Based Wax Blend
EYES: Contact with powder may cause mechanical irritation. Exposure to fumes may cause
mild irritation
INHALATION: Powder, aerosol or fumes may cause irritation to nose and throat.
INGESTION: Not expected to occur. Ingestion may cause abdominal cramps and diarrhea
DELAYED EFFECTS: None known.
Ingredients found on one of the OSHA designated carcinogen lists are listed below.
Ingredient Name NTP Status IARC Status OSHA List
* No ingredients listed in this section *
________________________________________________________________________
4. FIRST AID MEASURES
________________________________________________________________________
SKIN: Wash thoroughly with water and soap; if irritation develops, contact a physician. In case of contact with
molten material, submerge injured area in cold water. Do not attempt to remove material adhering to the skin
.Get immediate medical attention.
EYE: Flush eyes with large amounts of water for 15 minutes. Get medical attention if irritation occurs.
INHALATION: For inhalation of powder or vapors, remove to fresh air. If breathing is difficult, get medical attention.
INGESTION: Not expected to occur. If ingested, consult a physician. Do not induce vomiting
ADVICE TO PHYSICIAN: No specific advice. Treat according to symptoms present. Burns from molten material can be
treated as normal thermal burns.
________________________________________________________________________
5. FIRE FIGHTING MEASURES
________________________________________________________________________
FLAMMABLE PROPERTIES:
> 300 掳F
FLASH POINT:
FLASH POINT METHOD: Open cup.
AUTOIGNITION TEMPERATURE: Not known.
UPPER FLAME LIMIT (Volume % in air): Not applicable.
LOWER FLAME LIMIT (Volume % in air): Not applicable.
FLAME PROPAGATION RATE (Solids): Unknown.
OSHA FLAMMABILITY CLASS: Not applicable.
________________________________________________________________________
MSDS Number: WB0029a Page 2 of 7
Current Issue Date: 04/02
Material Safety Data Sheet
Petroleum/Plant Based Wax Blend
EXTINGUISHING MEDIA:
Carbon dioxide, dry chemical or fine water spray. Avoid water stream on molten burning material as it may scatter and spread
the fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Melts in proximity to fires causing slippery floors and stairs. Rags and waste paper containing this material may heat and burn
spontaneously. Fire may produce dense smoke and irritating or poisonous gases. Run-off from fire control may cause
pollution.
SPECIAL FIREFIGHTING PRECAUTIONS/INSTRUCTIONS:
Wear self-contained breathing apparatus meeting NIOSH standards and protective clothing. Watch footing on floors and
stairs because of possible spreading of molten material. Use water spray to keep containers cool.
________________________________________________________________________
6. ACCIDENTAL RELEASE MEASURES
________________________________________________________________________
IN CASE OF SPILL OR OTHER RELEASES: (Always wear recommended personal protective equipment.)
Sweep up spilled material, place it in container and dispose as is described in Section 13.
Spills and releases may have to be reported to Federal and/or local authorities. See the Regulatory Information section (#15)
regarding reporting requirements.
________________________________________________________________________
7. HANDLING AND STORAGE
________________________________________________________________________
NORMAL HANDLING: (Always wear recommended personal protective equipment.)
Avoid spillage that can cause slippery conditions. Use good personal hygiene and housekeeping. Avoid breathing fumes
from heating operations.
STORAGE RECOMMENDATIONS:
Store in closed containers away from heat, sparks, open flame or strong oxidizing agents.
________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
________________________________________________________________________
ENGINEERING CONTROLS:
Use adequate ventilation when handling molten material. For storage and ordinary handling, general ventilation is satisfactory.
________________________________________________________________________
MSDS Number: WB0029a Page 3 of 7
Current Issue Date: 04/02
Material Safety Data Sheet
Petroleum/Plant Based Wax Blend
PERSONAL PROTECTIVE EQUIPMENT:
SKIN PROTECTION:
Use chemical-resistant gloves for prolonged or repeated exposure. Use insulated gloves with long sleeves for handling molten
material.
EYE PROTECTION:
Use chemical goggles around molten material.
RESPIRATORY PROTECTION:
Use a NIOSH approved vapor respirator around molten material if ventilation is not adequate.
ADDITIONAL RECOMMENDATIONS:
Not generally required.
EXPOSURE GUIDELINES: (Guidelines exist for the following ingredients)
Ingredient Name ACGIH TLV OSHA PEL Other Limit
Paraffin Wax Fumes 2 mg/m3 (TWA)
* = Limit established by Honeywell International
** = Workplace Environmental Exposure Level (AIHA)
*** = Biological Exposure Index
________________________________________________________________________
9. PHYSICAL AND CHEMICAL PROPERTIES
________________________________________________________________________
APPEARANCE: Light Yellow Slab
PHYSICAL STATE: Solid.
ODOR: Characteristic waxy odor.
SPECIFIC GRAVITY: (Water = 1.0) 0.80-0.85
SOLUBILITY IN WATER: (Weight %) Negligible
pH: Not applicable.
BOILING POINT: Not applicable.
MELTING POINT: 120-125掳 F
VAPOR PRESSURE: Negligible.
VAPOR DENSITY: (Air = 1.0) Not applicable.
EVAPORATION RATE: Not applicable. Compared to: Not applicable.
% VOLATILES: Not applicable.
FLASH POINT: > 300掳F (> 260掳C)
(Flash point method and additional flammability data are found in Section 5.)
________________________________________________________________________
10. STABILITY AND REACTIVITY
________________________________________________________________________
________________________________________________________________________
MSDS Number: WB0029a Page 4 of 7
Current Issue Date: 04/02
Material Safety Data Sheet
Petroleum/Plant Based Wax Blend
NORMALLY STABLE? (Conditions to Avoid)
Stable at normal conditions.
INCOMPATIBILITIES:
Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS:
Depending on conditions of fire, CO, CO2, and other hazardous gases may be generated.
HAZARDOUS POLYMERIZATION?
Will not occur.
________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
________________________________________________________________________
IMMEDIATE (ACUTE) EFFECTS:
Not determined.
DELAYED (SUBCHRONIC & CHRONIC) EFFECTS:
Not determined.
OTHER DATA:
None.
________________________________________________________________________
12. ECOLOGICAL INFORMATION
________________________________________________________________________
No data have been developed on this subject. This product is not soluble in water.
________________________________________________________________________
13. DISPOSAL CONSIDERATIONS
________________________________________________________________________
RCRA:
Is the unused product a RCRA hazardous waste if discarded? No.
If yes, the RCRA ID number is:
________________________________________________________________________
MSDS Number: WB0029a Page 5 of 7
Current Issue Date: 04/02
Material Safety Data Sheet
Petroleum/Plant Based Wax Blend
NORMALLY STABLE? (Conditions to Avoid)
Stable at normal conditions.
INCOMPATIBILITIES:
Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS:
Depending on conditions of fire, CO, CO2, and other hazardous gases may be generated.
HAZARDOUS POLYMERIZATION?
Will not occur.
________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
________________________________________________________________________
IMMEDIATE (ACUTE) EFFECTS:
Not determined.
DELAYED (SUBCHRONIC & CHRONIC) EFFECTS:
Not determined.
OTHER DATA:
None.
________________________________________________________________________
12. ECOLOGICAL INFORMATION
________________________________________________________________________
No data have been developed on this subject. This product is not soluble in water.
________________________________________________________________________
13. DISPOSAL CONSIDERATIONS
________________________________________________________________________
RCRA:
Is the unused product a RCRA hazardous waste if discarded? No.
If yes, the RCRA ID number is:
________________________________________________________________________
MSDS Number: WB0029a Page 5 of 7
Current Issue Date: 04/02
Material Safety Data Sheet
Petroleum/Plant Based Wax Blend
OTHER DISPOSAL CONSIDERATIONS: Dispose in accordance with local, state and federal regulations.
The information offered here is for the product as shipped. Use and/or alteration to the product such as mixing with other materials may
significantly change the characteristics of the material and alter the RCRA classification and the proper disposal method.
________________________________________________________________________
14. TRANSPORT INFORMATION
________________________________________________________________________
US DOT PROPER SHIPPING NAME: Not regulated
US DOT HAZARD CLASS: Not Applicable
For additional information on shipping regulations affecting this material, contact the information number found on the first page.
________________________________________________________________________
15. REGULATORY INFORMATION
________________________________________________________________________
TOXIC SUBSTANCES CONTROL ACT (TSCA):
TSCA INVENTORY STATUS: Product鈥檚 ingredients are listed on the TSCA Chemical Inventory.
OTHER TSCA ISSUES: None.
SARA TITLE III/CERCLA:
RQs & TPQs
"Reportable Quantities" (RQs) and/or "Threshold Planning Quantities" (TPQs) exist for the following ingredients.
SARA/CERCLA SARA EHS
Ingredient RQ (lbs) TPQ (lbs)
* No ingredients listed in this section *
Spills/releases resulting in the loss of any ingredient at or above its RQ requires immediate notification to the National Response
Center (1-800-424-8802) and to your Local Emergency Planning Committee.
SECTION 311 HAZARD CLASS: None.
SARA 313 TOXIC CHEMICALS:
The following ingredients are SARA 313 "Toxic Chemicals". CAS #'s and wt. % are found in section #2.
Ingredient Comment
* No ingredients listed in this section *
STATE RIGHT TO KNOW:
________________________________________________________________________
MSDS Number: WB0029a Page 6 of 7
Current Issue Date: 04/02
Material Safety Data Sheet
Petroleum/Plant Based Wax Blend
In addition to the ingredients found in Section 2, the following are listed for state right-to-know purposes:
Ingredient Wt.% Comment
No ingredients listed in this section.
ADDITIONAL REGULATORY INFORMATION:
None.
WHMIS CLASSIFICATION (CANADA):
Not subject to WHMIS regulations.
FOREIGN INVENTORY STATUS:
Canadian DSL (Domestic Substances List)
EINECS (European Inventory of Existing Commercial Chemical Substances)
Australian Inventory
Korean Inventory
Philippine Inventory (PICCS)
Chinese Inventory
________________________________________________________________________
16. OTHER INFORMATION
________________________________________________________________________
CURRENT ISSUE DATE: 04/02
PREVIOUS ISSUE DATE: New
CHANGES TO MSDS FROM PREVIOUS ISSUE DATE ARE DUE TO THE FOLLOWING:
Not Applicable
OTHER INFORMATION: None
________________________________________________________________________
MSDS Number: WB0029a Page 7 of 7
Current Issue Date: 04/02
|