product information + warranty form
1 about Termi-nator
Termi-nator is Australian grown plantation pine structural framing that
has been treated with an organic pesticide to protect the timber from
termite attack.
Termi-nator is suitable for wall frames, roof trusses and any other internal
load bearing application where termite protection is required.
Termi-nator blue pine framing is treated with the same
chemical that is used in common citronella oil products.
Why is timber treated?
Plantation pine has little natural resistance to termites and fungal decay. However, it can be easily and safely
treated to make it resistant to the natural enemies of wood. Treating the timber has no negative effect on the
stiffness and strength of the timber. H2F treated timbers have the same allowable uses under the Building Code
of Australia with regard to 铿乺e rating.
not every blue frame is the same 2
Not every blue frame is the same
Termi-nator is the best termite resistant framing on the market for a number of important reasons.
Easy and safer to work with No need to reseal docked ends
Termi-nator is treated with a water-based pesticide. While it鈥檚 good practice to reseal treated timber where
This means that there are no slippery surfaces or the effective barrier has been removed, the superior
oily residue and Termi-nator feels and works just like repellence of Termi-nator means that we can extend
untreated timber. It is odourless and does not emit the warranty to include docked ends, cross-cut faces,
volatile fumes. Termi-nator is strong yet light making trenched top or bottom plates for 铿亁ing of studs and
it easy to transport, cut and erect. drilled holes for services. No need to reseal.
25-year fully transferable warranty Reliable supply
Termi-nator is guaranteed to resist termite and Termi-nator is marketed and distributed by Pine
European house borer attack for 25 years. There is no Solutions Australia, a national timber sales, marketing
need to register the warranty to make it valid and it is and distribution company. We are supported by one of
fully transferable from owner to owner. On the back the top preservative companies in the world, Osmose.
of this brochure is a sticker for the homeowner鈥檚 fuse Pine Solutions Australia is backed by Weyerhaeuser,
box to identify a Termi-nator frame for future pest or one of the world鈥檚 largest timber companies. You
building inspections. can be con铿乨ent that Termi-nator is in good supply
to meet the demands of the building industry in
Kills and repels
Australia. It is available in a large range of widths,
The active ingredient in Termi-nator is Bifenthrin
35mm and 45mm thick.
which is dissolved in water and sprayed onto the
Saves time with the building
timber. This pesticide not only kills termites but repels
inspector
them as well. This means they won鈥檛 use the frame
and truss as a 鈥渉ighway鈥? to reach other edible parts Termi-nator is approved by Australian Standards and
of the house. Bifenthrin is the only APVMA-approved the Building Code of Australia as a termite resistant
H2-F treatment system for use against the European building material. It is branded clearly along the stick
house borer. so that building inspectors can quickly identify it as a
termite resistant frame.
No issues with adhesives
Unlike other brands of blue pine framing,
Termi-nator has no compatibility issues with standard
stud adhesives or paints. There is no curing time
required before using adhesives for plasterboard and
no need to rely solely on mechanical fasteners.
3 environmentally responsible
Forests, forestry and the use of wood products help mitigate climate
change by removing carbon dioxide from the atmosphere*
By choosing wood products wherever possible 鈥? Timber frames won鈥檛 rust so they are a must for
in house construction, greenhouse gas emissions homes near the coast
equivalent to up to 25 tonnes of carbon dioxide per 鈥? Timber frames do not rapidly expand and contract
house could be saved in Australia** with heat which can make unwelcome noise
Following are some of the other reasons why 鈥? In the case of a house 铿乺e, a timber frame is not
plantation pine is the preferred structural building affected if one section of a house is destroyed. If it
material in Australia. burns it will char and support a structural load for
鈥? It is widely available and competitively priced longer than a steel frame which is more likely to
buckle and soften
鈥? Homes are built faster because contractors are
* Souce: Forests, Wood and Australia鈥檚 Carbon Balance
familiar with timber and comfortable using it
** Source: Co-operative Research Centre for Greenhouse Accounting
鈥? It offers 铿俥xibility with design options and makes
future alterations and additions easy
鈥? It is a safe building material and does not conduct
heat, cold or electricity
protection methods 4
Termites: a whole of house approach
Termite risk map of Australia
F CAPRICORN
TROPIC O
Geraldton
Source: CSIRO
Termi-nator H2-F - not for use above Tropic of Capricorn
Termites thrive in many regions of Australia and Combining Termi-nator termite resistant framing
don鈥檛 just attack timber houses. A study by the CSIRO with a chemical or physical barrier system, provides
(Cookson 1999) found that steel and masonry effective 鈥渨hole of house鈥? protection against termite
houses had virtually the same chances of attack as attack and damage in high risk areas. This will
timber houses. protect not just the structural frame, but also other
cellulose materials such as cupboards and carpets
Termites can damage cabinetry, plasterboard,
mentioned above.
electrical insulation, carpet and clothes. Therefore
the best protection method is to keep termites out State and local government may have policies on
of the structure completely and the best method for mandatory use of 鈥渨hole of house鈥? protection or
achieving this is a 鈥渨hole of house approach鈥?. other speci铿乧 termite management requirements.
Please check with your local authorities. In all cases,
The Australian Standard 3660 details several
regardless of the building protection strategy used,
methods for achieving 鈥渨hole of house鈥? termite
Australian Standard AS3660.2 recommends that
protection, which are referenced in the Australian
periodic inspection for termite activity is carried out at
Building Code (BCA).
intervals of 12 months or less.
5 products and hazard classes
Choosing the Right Treatment
HAZARD CLASS SITUATION LOCATION COMMON USES WARRANTY
鈥? Framing, 铿俹oring, trusses
Termi-nator H2 Inside, above-ground Australia-wide
鈥? Borer and termite hazards
Everywhere
鈥? Framing, 铿俹oring, trusses
Termi-nator H2-F Inside, above-ground south of Tropic of
鈥? Borer and termite hazards
Capricorn
鈥? Decking, fencing, cladding, fascia
and exterior structural timber
Ironwood H3 Outside, above-ground Australia-wide
鈥? Moderate fungal decay, borer and
termite hazards
鈥? Fence posts, greenhouses, pergola
posts (in-ground) and landscaping
timbers
Ironwood H4 Outside, in-ground Australia-wide
鈥? Severe fungal decay, borer and
termite hazards
The Hazard Class (H1-H6) refers to the maximum Why is the use of blue timber
hazard level to which treated timber can be exposed (H2-F) limited?
to (see table above). Termi-nator framing is treated
All blue H2-F treated timber is approved by Australian
to an H2 level so it is suitable for applications at risk
Standards to protect against the most common species
of termite attack, which are above ground and not
of termites in Australia including Coptotermes spp.
exposed to the weather. Such applications include
Schedorhinotermes and Acinaciformis. However, H2-F
wall frames and roof trusses.
timber is not resistant to Mastotermes darwiniensis,
H2 treated products have traditionally been treated which is present in the north of Australia. Therefore
with full sapwood penetration. However, new H2-F treated timber is not approved for use north
envelope treatments (H2-F blue framing) are still of the Tropic of Capricorn (see hazard map). H2
guaranteed for 25-years but have improved product full penetration treated timber is approved for use
availability and cost effectiveness. throughout Australia.
H2-F treated timber is still suitable for internal, Termi-nator framing is treated to either hazard class
above-ground use; however, it cannot be used above H2 full penetration treatment, or H2-F envelope
the Tropic of Capricorn (the 鈥楩鈥? indicates there is a use treatment with chemical loading requirements in
restriction). accordance with the relevant standards (AS/NZ 1604
Speci铿乧ation of Preservative Treatment, the NSW
Timber Marketing Act and the Queensland Timber
Utilisation and Marketing Act).
All blue H2-F treated timber is approved by Australian Standards to protect
against the most common species of termites in Australia
product identi铿乧ation 6
How to identify Termi-nator
To ensure genuine Termi-nator timber is being
used, all sticks of Termi-nator are clearly branded.
This branding stamp or tag also lists a code for the
treatment plant that manufactured the product (铿乺st
three 铿乬ures), the preservative used (next two 铿乬ures)
and the maximum hazard level to which the timber
may be exposed (the last two 铿乬ures).
Termi-nator H2-F
This branding is printed along every stick of timber at
1.2m intervals so that Termi-nator is easy to identify
on-site or during prefabrication. The blue dye usually
lasts for several months but is only a visual indicator.
The termite treatment chemical is colourless and is
effective for decades.
Colour consistency is not an indicator of treatment
reliability. If the dye used in the treatment fades, the
timber is still guaranteed against termite attack for 25-
years if the conditions of the warranty have been met.
Termi-nator H2
Termi-nator H2 treated timber has a tag attached to
the end of each stick. It is also generally identi铿乪d by
colour, with the timber being a red to light orange
colour. Like the blue dye in H2-F, the red dye in H2 full
penetration treatment is not intended to be colour fast
for long-term use and will fade within a few weeks of
exposure to the sun.
H2 full penetration treated products may have a
noticeable solvent odour. This odour will fade as the
solvent evaporates. The evaporation period depends
on a number of factors, but should last only a few
days once the timber is separated from a pack and
left in an open, ventilated area. By the time the
treated timber is used in construction there should
be no odour.
Purchasing Termi-nator
Visit www.pine.com.au to 铿乶d your nearest
Termi-nator stockists or ask your local timber stockist
Numbers within the rectangle branded on the timber identify the
to order it for you from Pine Solutions Australia. manufacturer, the preservative used and the hazard level.
7 warranty details
鈥? Cutting to length and notching as required for
Termi-nator warranty conditions
铿乼ting is acceptable (see below for recommended
Pine Solutions Australia Pty Ltd guarantees that Termi-
installation procedures). The warranty will not
nator treated framing will resist any structural damage
cover product that has been rip sawn, re-dressed or
from the termite species referenced above for a
had its original dimensions signi铿乧antly altered in
period of 25 years from the date of supply when used
any way, unless resealed with suitable preservative
and installed in accordance with all current building
such as Protim XJ.
codes and legislation (including AS/NZ 1604, Timber
鈥? Any installation costs, alternative accommodation
Marketing Act (NSW) and the Timber Utilisation and
costs and any consequential loss or damage to
Marketing Act (QLD) if applicable).
the extent to which they can be excluded under
Any correctly installed Termi-nator products that
applicable laws.
become structurally un铿乼 due to termite attack within
鈥? Termi-nator products treated to an H2-F level
the guarantee period will be repaired or replaced
and used north of the Tropic of Capricorn are not
at no cost to the home owner subject to the terms
covered by this warranty.
herein. The homeowner must notify Pine Solutions
Australia and offer its personnel the opportunity
Resealing requirements for
to inspect affected timbers prior to removal. This
Termi-nator
warranty is transferable to subsequent owners of
The recommendation of AS/NZ 1604 for all treated
the property where Termi-nator products are used
products in the hazard classes including H2 and
provided that the guarantee form or other reasonable
H2-F is that good building practice is to reseal with a
proof of the original purchase is retained. Nothing in
suitable paint-on timber preservative.
this warranty limits the homeowner鈥檚 rights under
Instances where resealing is recommended for
the Trade Practices Act and similar state and territory
good building practice, but not required under
laws and this warranty is in addition to any implied
the terms of this Termi-nator warranty, include
or statutory warranties, or any other legal rights the
the following when Termi-nator is used below the
homeowner may have. This warranty requires that
Tropic of Capricorn:
the builder and homeowner take all reasonable steps
to ensure the product remains in the condition for 鈥? Where a piece of timber is cut to length and the cut
which it is intended. All the details requested on the face will be left exposed
warranty form must be completed and provided with 鈥? Trenched bottom and or top plates for 铿亁ing
any claim. of studs
Speci铿乧 warranty exclusions
鈥? Product deterioration due to factors other
than termite attack, including (but not limited
to) weathering, fungal decay, mould growth,
mechanical wear and tear, physical breakage due to
overload, 铿乺e and inherent physical properties
of the timber such as shrinking, swelling, warping
and twisting.
No need to reseal docked ends
warranty details 8
鈥? Where holes are drilled in the erected frames for they are tightly joined to Termi-nator or higher
installation of services level treated timber and if there is no exposed
untreated timber.
鈥? Turbo-webs
鈥? As with all timber products, keep Termi-nator
Examples of where resealing is required to meet
products protected from weather before use.
the conditions of this warranty are
Keep product clear of ground contact.
鈥? When Termi-nator H2 is used above the
鈥? Termi-nator product exposure to rain and sunlight
Tropic of Capricorn
on the building site should be minimised.
鈥? Re-planing of studs on site to ensure wall
straightness 鈥? Termi-nator treated timber is non-corrosive and
normal bright steel nails and 铿亁ing plates are
鈥? Notching of bottom plate for 铿亁ing of bath tub or
suitable. Once dry it does not affect nail or
shower recess
plate holding.
鈥? Speed or metal bracing
鈥? Given there are different formulations of H2 and
Required installation procedures H2-F in the marketplace, we recommend checking
鈥? Check that all timber delivered to site has been with plasterboard suppliers regarding their speci铿乧
branded appropriately to H2 and H2-F treatment brands鈥? recommendations for plasterboard 铿亁ing
levels. Check that all invoices from suppliers state to termite treated timber frames. Water-based
the treatment level provided on all treated timber. treatment is touch-dry at manufacture and will not
鈥? Trenches and notches do not require resealing if affect adhesives including plasterboard adhesives.
9 maintenance and safety
Maintenance
鈥? Repair any plumbing or roo铿乶g leaks immediately as water will promote wood rot.
鈥? Do not build structures against the side of buildings without taking necessary measures to prevent termite
entry. Consult the Building Code of Australia for recommendations.
鈥? Do not build garden beds or raise lawns against the side of dwellings as this can provide an access point
for termites.
鈥? Do regular inspections to look for termite galleries entering dwellings and have regular inspections by a
quali铿乪d inspection agent. If you are unsure, consult pest control experts such as the Australian Environmental
Pest Managers Association.
Safe handling procedures
When working with dry treated timber the following is recommended
鈥? Keep work area clean and keep airborne wood dust below recommended maximum exposure levels.
Use mechanical air extraction if necessary, particularly when working with power tools
鈥? When using power tools on the timber use appropriate personnel protection such as dust mask, safety
glasses, ear muffs and gloves
鈥? Cotton or light leather gloves are recommended for protection against splinters and cuts during
general handling
鈥? Wash hands after use
鈥? Do not burn off-cuts for disposal
Additional information
Material Safety Data Sheets (MSDS) for Termi-nator and further information on handling treated timber
may be found on the Pine Solutions Australia website at www.pine.com.au
one simple warranty form
This form covers all Termi-nator products and is to be completed by the builder and retained by the
homeowner.
Owner鈥檚 full name
Owner鈥檚 full street address
Builder鈥檚 name
Builder鈥檚 registration number
Termi-nator Wall Framing
Wall framing supplier鈥檚 name
Supplier鈥檚 invoice number/s
Date/s supplied to site
Wall framing treatment branding number/s
Completion date of wall framing construction
Termi-nator Roof Trusses
Roof truss supplier鈥檚 name
Supplier鈥檚 invoice number/s
Date/s supplied to site
Roof truss treatment branding number/s
Completion date of roof truss construction
I, (name of builder) ___________________________ certify that the wall framing, roof trusses and 铿俹or
framing (cross out if not applicable) used as structural members in the dwelling listed above are composed
of Termi-nator H2 or H2-F product.
Signature of builder Date
To make a claim under this warranty, the homeowner must provide Pine Solutions Australia with written noti铿乧ation and access to
view the alleged damaged Termi-nator product prior to its removal from service, within 60 days of receipt of such notice. Failure to
do so will void this warranty. A suf铿乧ient sample of the Termi-nator product damaged by insect activity must also be provided so
that Pine Solutions Australia may conduct identi铿乧ation testing.
Ensure your builder completes the site address details and date of supply on the
sticker below and then place sticker in fuse/meter box to assist with building
and pest inspections.
The Building Code of Australia requires that a notice (two in Queensland) be
铿亁ed permanently to the building in a prominent location providing information
about the termite management system used.
www.pine.com.au
PSA1621
Pine Solutions Australia | Ground Floor 71 Ridge Street Gordon NSW 2072 | Phone 02 9496 9155
|