Material Safety Data Sheet
Ease Release 200 Aerosol MSDS No. 7002
Date of Preparation: January 6, 2004 Revision: 0004
Section 1 - Chemical Product and Company Identification
Product/Chemical Name: Ease Release 200 Aerosol
General Use: Mold Release Agent
Manufacturer: Mann Formulated Products Inc., 2000 St. John St., Easton PA 18042
Phone (610) 252-5800, Fax (610) 252-6200
Emergency Contact: Chem-Tel
Domestic 800-255-3924
International 813-248-0585
Section 2 - Composition / Information on Ingredients
Component CAS ACGIH TLV Exposure Limits Weight AEL*
Number OSHA PEL Percent Exposure
(%) Limits
Dimethyl Ether 115-10-6 None Established None Established 50-60 1000 ppm
Ethane,1,1,1,2- 811-97-2 None Established None Established 30-40 1000 ppm
Tetrofluoro
Silicone Polymers Mixture None Established None Established 5-10
* AEL is the materials manufactures acceptable exposure limit.
Section 3 - Hazards Identification
Potential Health Effects Potential Health Effects
HMIS
Acute Effects Inhalation: Over exposure by inhalation of vapors may cause 2
H
F 1
respiratory irritation or nonspecific discomfort such as nausea, headache or
R 0
weakness. Inhalation of concentrations above the recommended limits may
cause temporary central nervous system depression with anesthetic effects such
as dizziness, headache, incoordination and loss of consciousness or temporary
alteration of the heart鈥檚 electrical activity (cardiac arrhythmia). Gross
overexposure may be fatal. Inhalation of respirable aerosols of the release agent
in this product may cause serious toxic effect in the lungs, based on animal
studies.
Eye: Eye contact with liquid or vapor may cause irritation.
Skin: Skin contact with the liquid may cause freezing of the skin or irritation.
Ingestion: Ingestion is not considered a potential route of exposure
Carcinogenicity: This product contains no components listed as carcinogenic by IARC, NTP,
and OSHA 1910(Z).
Medical Conditions Aggravated by Long-Term Exposure:
Individuals with preexisting diseases of the central nervous or cardiovascular system may have
increased susceptibility to the toxicity of excessive exposure.
Chronic Effects: No chronic health effects known.
Page 1 of 4
MSDS No. 7002 Ease Release 200 Aerosol Revision:0004
Section 4 - First Aid Measures
Inhalation: Remove source(s) of contamination and move victim to fresh air. If breathing has
stopped, give artificial respiration, then oxygen if needed. Contact physician immediately.
Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention.
Skin Contact: In case of skin contact, wash thoroughly with soap and water.
Ingestion: Ingestion is unlikely route of exposure. Do not induce vomiting unless instructed by a
physician.
After first aid, get appropriate in-plant, paramedic, or community medical support.
Note to Physicians:
Because of possible disturbance of cardiac rhythm, catecholamine drugs, such as epinephrine,
should be used only in situations of emergency life support.
Section 5 - Fire-Fighting Measures
Fire and Explosion Hazards: Vapors confined in a poorly ventilated area may
be ignited by a spark or flame. Vapors may travel considerable distances to NFPA
source of ignition. Vapors are heavier than air and may accumulate in low
1
areas. Containers may rupture or explode under fire conditions. Hazardous
0
2
decomposition products may be formed. Material can accumulate static 鈥?
charges which can cause an incendiary electrical discharge. Empty containers
retain product residue and can be dangerous.
Flammability Classification: Non Flammable aerosol, as determined by ASTM D 3065-77 and
FSHA sec. 1500.45 However, this product contains components which may be ignited under
certain circumstances. Do not use near sources such as sparks or open flames.
Fire-Fighting Instructions: Use dry chemical, foam or CO2 ; water may be ineffective but should
be used to keep containers cool.
Fire-Fighting Equipment: Because fire may produce toxic thermal decomposition products, wear
a self-contained breathing apparatus (SCBA) with a full facepiece operated in pressure-demand or
positive-pressure mode.
Section 6 - Accidental Release Measures
Spill /Leak Procedures: Avoid breathing vapors. Evacuate area until vapor has been dispersed.
Remove all sources of ignition. Stop or reduce discharge if it can be done safely.
Section 7 - Handling and Storage
Handling Precautions: Minimize breathing of vapors and avoid prolonged or repeated contact
with skin. Wear proper protective equipment. If ventilation is not sufficient, wear proper
respiratory equipment. Do not use near ignition sources. Contents under pressure. Do not
puncture or incinerate .
Storage Requirements: Store in cool dry, well ventilated area away from all sources of ignition.
Empty container may contain residues which are hazardous. Do not store at temperature above
120掳F.
Page 2 of 4
MSDS No. 7002 Ease Release 200 Aerosol Revision:0004
Section 8 - Exposure Controls / Personal Protection
Engineering Controls:
Ventilation: Provide general or local exhaust ventilation systems to maintain airborne
concentrations below OSHA PELs (Sec. 2). Local exhaust ventilation is preferred because it
prevents contaminant dispersion into the work area by controlling it at its source.
Administrative Controls:
Respiratory Protection: Seek professional advice prior to respirator selection and use. Follow
OSHA respirator regulations (29 CFR 1910.134) and, if necessary, wear a MSHA/NIOSH-
approved respirator. Select respirator based on its suitability to provide adequate worker protection
for given working conditions, level of airborne contamination, and presence of sufficient oxygen.
For emergency or nonroutine operations (cleaning spills, reactor vessels, or storage tanks), wear an
SCBA. Warning! Air-purifying respirators do not protect workers in oxygen-deficient
atmospheres. If respirators are used, OSHA requires a written respiratory protection program that
includes at least: medical certification, training, fit-testing, periodic environmental monitoring,
maintenance, inspection, cleaning, and convenient, sanitary storage areas.
Protective Clothing/Equipment: Wear chemically protective gloves, boots, aprons, and gauntlets
to prevent prolonged or repeated skin contact. Wear protective eyeglasses or chemical safety
goggles, per OSHA eye- and face-protection regulations (29 CFR 1910.133). Contact lenses are not
eye protective devices. Appropriate eye protection must be worn instead of, or in conjunction with
contact lenses.
Safety Stations: Make emergency eyewash stations, safety/quick-drench showers, and washing
facilities available in work area.
Contaminated Equipment: Separate contaminated work clothes from street clothes. Launder
before reuse. Remove this material from your shoes and clean personal protective equipment.
Comments: Never eat, drink, or smoke in work areas. Practice good personal hygiene after using
this material, especially before eating, drinking, smoking, using the toilet, or applying cosmetics.
Section 9 - Physical and Chemical Properties
Product Form: Aerosol Can Vapor Density (Air=1): ~4
Appearance and Odor: Clear, Slight ethereal odor Water Solubility: Negligible
Vapor Pressure: 10.02 psia @ 70掳F Boiling Point: N/A
Specific Gravity: N/A Evaporation Rate: (butyl acetate =1) >1
Section 10 - Stability and Reactivity
Stability: This product is stable at room temperature in closed containers under normal storage and
handling conditions.
Polymerization: Hazardous polymerization cannot occur.
Hazardous Decomposition Products: Thermal oxidative decomposition can produce hydrochloric
and hydrofluoric acids, carbonyl halides such as phosgene, silicon dioxide, carbon oxides and
traces of incompletely burned carbon compounds, formaldehyde.
Page 3 of 4
MSDS No. 7002 Ease Release 200 Aerosol Revision:0004
Section 11- Toxicological Information
None established
Section 12 - Ecological Information
None Established
Section 13 - Disposal Considerations
Disposal: Contact your supplier or a licensed contractor for detailed recommendations. Follow
applicable Federal, state, and local regulations.
Section 14 - Transport Information
DOT IATA IMDG
Shipping Name: N/A Shipping Name Shipping Name:
Consumer Commodity Aerosol, non-flammable,
UN #: N/A
N.O.S.
ID#: 8000
Hazard Class: ORM-D
UN #: UN 1950
Hazard Class: 9
Label: N/A
Hazard Class: 2.2
Label: Non-Required
Label: Non-Required
Section 15 - Regulatory Information
TSCA Inventory Status (40 CFR710): All components of this formulation are listed in the TSCA
Inventory.
SARA EHS (Extremely Hazardous Substance) (40 CFR 355): None
SARA Toxic Chemical (40 CFR 372.65) and SARA 313 Title III Codes:
California Proposition 65: This product contains no chemicals which in the State of California has
found to cause cancer, birth defects or other reproductive harm
Section 16 - Other Information
Prepared By: Dominick J. Finocchio
Title: Technical Director
The information contained in this MSDS is considered accurate as of the version date. However,
no warranty is expressed or implied regarding the accuracy of the data. Since the use of this
product is not within the control of Mann Formulated Products, a subsidiary of Smooth-On Inc., it
is the user鈥檚 obligation to determine the suitability of the product for its intended application and
assumes all risk and liability for its safe use.
Page 4 of 4
|