Material Safety Data Sheet
Renew Silicone Pigment Fleshtone MSDS No. 937
Date Of Preparation: February 15, 2006 Revision: 0000
Section 1 - Chemical Product and Company Identification
Product/Chemical Name: Renew Silicone Pigment Fleshtone
General Use: Silicone Elastomer
Manufacturer: 95 W. Main Street, Suite 511, Chester, NJ 07930
Phone (888) 765-9835
Emergency Contact: Chem-Tel
Domestic 800-255-3924
International 813-248-0585
Section 2 - Composition / Information on Ingredients
This product does not contain any hazardous components defined by OSHA 29 CFR 1910-1200
Section 3 - Hazards Identification
Acute Effects
Inhalation: Unknown
Skin: Skin contact with the liquid may cause irritation.
Ingestion: If swallowed symptoms may include: gastrointestinal irritation such as, nausea,
vomiting and diarrhea.
Carcinogenicity: This product contains Carbon Black, which is classified as a possible carcinogen
by IARC.
Chronic Effects: Unknown
Section 4 - First Aid Measures
Inhalation: Remove source(s) of contamination and move victim to fresh air. HMIS
1
H
Contact physician immediately. 1
F
Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical 0
R
attention.
Skin Contact: In case of skin contact, wash thoroughly with soap and water.
Ingestion: Do not induce vomiting. Seek medical attention immediately.
After first aid, get appropriate in-plant, paramedic, or community medical support.
Section 5 - Fire-Fighting Measures
NFPA
Flash Point: Not Determined
Flammability Classification: Non-Flammable 1
0
Extinguishing Media: Water Fog, Dry Chemical, and Carbon Dioxide Foam 1
鈥?
Unusual Fire or Explosion Hazards: None
Fire-Fighting Instructions: Fire fighters should wear self-contained breathing
apparatus. Do not release runoff from fire control methods to sewers or waterways.
Fire-Fighting Equipment: Because fire may produce toxic thermal decomposition products, wear
a self-contained breathing apparatus (SCBA) with a full facepiece operated in pressure-demand or
positive-pressure mode.
MSDS No. 937 Revision: 0000
Section 6 - Accidental Release Measures
Spill /Leak Procedures: Dike larger spills to minimize the contaminated area and facilitate
salvage or disposal. Avoid run-off into storm sewers and ditches, which may lead to natural
waterways. Material should be recovered, if possible or collected by absorbent materials such as
dry clay, sand or sawdust.
Section 7 - Handling and Storage
Handling Precautions: Minimize breathing of vapors and avoid prolonged or repeated contact
with skin. Wear proper protective equipment.
Storage Requirements: Store in cool dry, well ventilated area away from all sources of ignition.
Section 8 - Exposure Controls / Personal Protection
Engineering Controls:
Ventilation: Provide general or local exhaust ventilation systems to maintain airborne
concentrations below OSHA PELs (Sec. 2). Local exhaust ventilation is preferred because it
prevents contaminant dispersion into the work area by controlling it at its source.
Administrative Controls:
Respiratory Protection: Seek professional advice prior to respirator selection and use. Follow
OSHA respirator regulations (29 CFR 1910.134) and, if necessary, wear a MSHA/NIOSH-
approved respirator. Select respirator based on its suitability to provide adequate worker
protection for given working conditions, level of airborne contamination, and presence of
sufficient oxygen. For emergency or nonroutine operations (cleaning spills, reactor vessels, or
storage tanks), wear an SCBA. Warning! Air-purifying respirators do not protect workers in
oxygen-deficient atmospheres. If respirators are used, OSHA requires a written respiratory
protection program that includes at least: medical certification, training, fit testing, periodic
environmental monitoring, maintenance, inspection, cleaning, and convenient, sanitary storage
areas.
Protective Clothing/Equipment: Wear chemically protective gloves, boots and aprons to prevent
prolonged or repeated skin contact. Wear protective eyeglasses or chemical safety goggles, per
OSHA eye- and face-protection regulations (29 CFR 1910.133). Contact lenses are not eye
protective devices. Appropriate eye protection must be worn instead of, or in conjunction with
contact lenses.
Safety Stations: Make emergency eyewash stations, safety/quick-drench showers, and washing
facilities available in work area.
Contaminated Equipment: Separate contaminated work clothes from street clothes. Launder
before reuse. Remove this material from your shoes and clean personal protective equipment.
Comments: Never eat, drink, or smoke in work areas. Practice good personal hygiene after using
this material, especially before eating, drinking, smoking, using the toilet, or applying cosmetics.
Page 2
MSDS No. 937 Revision: 0000
Section 9 - Physical and Chemical Properties
Product Form: Bulk Liquid Vapor Density (Air=1): Not Determined
Appearance and Odor: colored paste, mild odor Water Solubility: Insoluble
Vapor Pressure: Not Determined Boiling Point: Not Determined
Evaporation Rate: Not Determined
Section 10 - Stability and Reactivity
Stability: These products are stable at room temperature.
Polymerization: Hazardous polymerization cannot occur.
Hazardous Decomposition Products: Thermal oxidative decomposition can produce; carbon
monoxide, carbon dioxide and hydrocarbons.
Section 11- Toxicological Information
None Established
Section 12 - Ecological Information
None Established
Section 13 - Disposal Considerations
Disposal: Contact your supplier or a licensed contractor for detailed recommendations. Follow
applicable Federal, state, and local regulations.
Section 14 - Transport Information
DOT IATA IMDG
Not Regulated Not Regulated Not Regulated
Section 15 - Regulatory Information
EPA Regulations:
SARA 311/312 Codes:
This product contains the following chemicals that are subject to release reporting requirements
under section 313 Of SARA Title III: None
SARA Toxic Chemical (40 CFR 372.65): None
SARA EHS (Extremely Hazardous Substance) (40 CFR 355): None
TSCA Inventory Status (40 CFR710): All components of this formulation are listed in the TSCA
Inventory.
California Proposition 65: This product contains no chemicals, which in the State of California has
found to cause Cancer, birth defects or other reproductive harm
Page 3
MSDS No. 937 Revision: 0000
Section 16 - Other Information
Prepared By: The Safety Department of Renew
Disclaimer: The information contained in this MSDS is considered accurate as of the version date.
However, no warranty is expressed or implied regarding the accuracy of the data. Since the use of
this product is not within the control of Renew, it is the user鈥檚 obligation to determine the suitability
of the product for its intended application and assumes all risk and liability for its safe use.
Page 4
|